WIN Telecom

Optical fiber cable brand WIN TELECOM.
- We offer cables from 2-144cores. High quality product with good raw materials, made in Vietnam, 5-year warranty.

- We have good prices for internet supply providers (ISP), fiber optic construction units

Share

Good quality

Free sample for customer, pls contact with us soon.

Fast connector SC/PC, SC/APC, adapter, PLC Splitter, Patch cord, telecom accessories

Best price and good quality in Cambodia

Adapter, Connector SC/PC, SC/APC ... good quality in Cambodia

BEST PRICE IN CAMBODIA. ZTE F600 6.0 Optical Network Unit with 4 Ethernet Ports

ZTE F600 V6.0 is a high quality gpon type optical network access equipment.
Ethernet interface:1*10Mbps/100Mbps/1000Mbps adaptive port+1*10Mbps/100Mbps adaptive port,RJ-45 type,IEEE802.3 and IEEE802.3u standard.

GPON interface: SC/UPC PON interface,GPON standard.

Fiber access:Connecting internet throungh GPON access method.

Ethernet fuction: It Provids 4 Ethernet ports and Ethernet devices can be directly connected to the ZXHN F600 Ethernet port to achieve Internet and IPTV services.

Under the premise of providing the above functions ,achieving security, QoS and network management are also took into the consideration.

Providing multi-level authentication based on device, user, service, and encryption of data channels.

For different service requirements of the business,it can complete the local equipment and network matching QoS requirements.

Holding network management based on multiple management methods.

BEST PRICE IN CAMBODIA. ZTE ZXHN F401 EPON ONU ONT With Single Lan Port Apply to FTTH Modes,English interface

Features:
Standards:

IEEE 802.3ah,IEEE 802.3,IEEE 802.1D,IEEE 802.1Q,IEEE

802.1ad,IEEE 802.1P,IEEE 802.3x

Network Interface:

EPON Interface: 1 * EPON interface (SC/PC),

Transmission Rate: 1.25Gbps upstream and downstream

User Interface:

LAN: 1*10/100 Base-T interfaces with RJ-45 connector

Technical Features:
1.EPON interface: EPON standard, SC/UPC.
2.Ethernet interface: One RJ-45 (10/100/1000 Base-T) interface, complying with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab to support 10/100/1000 Mbps auto-negotiation.

Carter for different scenarios requirements
Kinds of EPON ONU to provide different interfaces such as FE, GE, VoIP, E1, WiFi, RF, USB and other interfaces to meet the requirements of FTTH,FTTO and FTTB application modes, not only for home user, but also for commercial users. Support full service operation with high QoS and security, such as HSIA, VoIP, IPTV and CATV.

Easy for deployment
Mounting mode and fiber coiling make installation very easy, with batch configuration on EMS to ensure zero configurations on ONU side.

Easy for trouble shooting
Support ONU signal tracing and performance monitoring, and quickly locate fault of ONU.

Particular power saving for a green network
Support status monitoring when ONU is free, and enter low power consumption state; Optical module can also enter low-power state when battery is working.

Optical fiber cable brand Sacom.
- We offer cables from 2-144cores. High quality product with Japanese and American raw materials, made in Vietnam, 5-year warranty.

- We have good prices for internet supply providers (ISP), fiber optic construction units

SACOM - DIRECT BURIED CABLE WITH TAPE ARMOUR
DB 2FO TO 144FO

GENERAL: This specification covers the design and performance of the single mode optical cables to be used in dierct buried and duct application. This cable shall fully comply with ITU-T G.652.D, IEC, EIA standards, TCVN 68-160: 2008

CABLE DESIGN: o 02 or 04 single mode fibres contained in loose buffer tubes. o Operating wavelength at 1310nm and 1550nm. o FRP central strength member. o Loose buffer tubes SZ stranded. o Buffer fully filled with filling Gel compound. o Water blocking tape and yarn. o Inner PE jacket or equivalent material. o Steel tape armour (PSP) o Outer HDPE jacket or equivalent material o Suitable as direct buried (DB) and duct

CABLE MAKE UP: o Around a fibre FRP central strength member, buffer tubes and if necessary filling elements are stranded to form the core of the cable. o The central strength member serving mainly as antibuckling element. o The buffer tube contains up to fibres and is filled with filling compound o As well the core is wrapped with water blocking tape and yarn in order to block any possible water ingress. o Inner PE jacket layer with min. thickness 0.7 mm. o Steel tape armour layer with thickness 0.15 mm will protect the cable from rodents. o Finally the HDPE jacket is extruded around the steel tape armour layer to protect the whole cable with min. thickness is 1.5 mm.

SACOM - FOR DUCTED ACCESS CABLE DAC 2 TO 144FO G.652D (ARMOUR)