Computer Networking and CCTV installation Kenya

NIC Teaming, also known in the Microsoft world as Load Balancing/Failover (LBFO), allows you to install additional physical Ethernet network adapters (NICs) into your server and “team” or combine them together to make one virtual NIC that provides better performance and fault tolerance

What is Port teaming?

In computer networking, the term link aggregation applies to various methods of combining (aggregating) multiple network connections in parallel in order to increase throughput beyond what a single connection could sustain, and to provide redundancy in case one of the links should fail.

What is meant by port forwarding?

In computer networking, port forwarding or port mapping is an application of network address translation (NAT) that redirects a communication request from one address and port number combination to another while the packets are traversing a network gateway, such as a router or firewall.

What is an QSFP+?

The Quad Small Form-factor Pluggable (QSFP) is a compact, hot-pluggable transceiver used for data communications applications. It is an industry format jointly developed and supported by many network component vendors, allowing data rates from 4x10 Gbit/s.

What does 10GBase T mean?

10GBase-T - Computer Definition.
An IEEE standard (802.3an, 2006) for 10 Gigabit Ethernet (10GbE). 10GBase-T translates to 10 Gbps (theoretical transmission rate), Baseband (one transmission at a time over a single, shared channel), over Twisted pair media.

What is an SFP+?

Definition of: SFP.

SFP. (Small Form-factor Pluggable) A small transceiver that plugs into the SFP port of a network switch and connects to Fibre Channel and Gigabit Ethernet (GbE) optical fiber cables at the other end. Superseding the GBIC transceiver, SFP modules are also called "mini-GBIC" due to their smaller size.

01 - Networking Fundamentals - Understanding Local Area Networking 01 - In this module you'll learn about basic concepts and Local Area Networking.

01 :: CCNA R&S Exam Course :: Introduction Join one of the most highly regarded and experienced CCIE instructors in the industry, CCIEx3 #8593 Brian McGahan (R&S, Security, SP), for this comprehensive...

Double Socket Network Cat 6 FacePlate Ethernet GIGABIT Wall Plate

Trunks are used to interconnect switches to form networks, and to interconnect local area networks (LANs) to form wide area networks (WANs) or virtual LANs (VLANs). A trunk often consists of multiple wires, cables, or fiber optic strands to maximize the available bandwidth and the number of channels that can be accommodated. A trunk can also be a broadband wireless link.

A crossover cable is all you need to connect two computers together. With proper configuration you can share internet connection between 2 machines. one machine with internet connection to another without internet connection. No switch.No router needed. How cool is that ?

We configure cables as you wait :Straight through, crossover and console (Bri)