FEBEST KENYA

A small part that helps protect the assembly

FEBEST FE-CLAMP is a fixing clamp designed to help secure the dust boot in the correct position. It is a small part, but proper boot fixation helps protect the assembly from dirt, dust and moisture.

When the clamp is loose, damaged or missing, the boot may shift or fail to sit properly. Over time, this can allow contaminants to enter the assembly and may lead to unwanted noise, vibration or faster wear of related components.

FEBEST part number: FE-CLAMP
Compatible with various Toyota, Mitsubishi, Honda, Mazda, Nissan, Acura, Audi and other vehicle models. For accurate selection, send us the VIN or vehicle details.

FEBEST is a smart repair solution: it allows you to replace the required component separately and restore the assembly without unnecessary cost of replacing the complete unit, where applicable.

B2B only: supplies for spare parts shops, wholesalers, workshops, garages and service centres.

For private car owners: some FEBEST products are already available on Jumia. The FEBEST range on Jumia will be gradually expanding.

FEBEST Kenya contacts:
Call / WhatsApp: +254 794 302 450
Email: [email protected]

Protect your steering rack before the damage starts

FEBEST MRKB-V75L is a left steering rack boot designed to protect the steering rack from dust, dirt, water and road debris.

A damaged boot may allow contamination to enter the steering system, which can lead to faster wear, looseness, unusual noises and more expensive repairs over time.

FEBEST MRKB-V75L fits:
Mitsubishi Pajero / Montero III, Pajero / Montero IV, as well as V60, V70, V80, V90 series and selected versions including V63W, V65W, V73W, V75W, V77W, V87W, V97W, V98W and other compatible models.

FEBEST smart repair solution:
why replace the whole assembly when you can replace the worn part? FEBEST offers a practical repair solution for the steering system — replacing the steering rack boot helps extend the life of the steering rack and reduce maintenance costs.

FEBEST Kenya works B2B only — with auto parts shops, wholesalers, workshops, garages and service centers.

For orders and cooperation:
Call / WhatsApp: +254 794 302 450
Email: [email protected]

Three successful days in Nairobi!

The FEBEST team would like to sincerely thank the organizers for hosting an excellent exhibition and creating a great platform for the automotive aftermarket industry to connect and grow.

A special thank you to all customers, partners, and visitors who took the time to meet with us at Stand 100A. We truly appreciate the valuable discussions, new connections, and the trust you place in the FEBEST brand.

We leave Nairobi inspired by the opportunities ahead and look forward to continuing the conversations and building strong partnerships across Kenya and East Africa.

Thank you, Nairobi. See you again soon!

Day 2 in Nairobi is complete!

Thank you to everyone who visited FEBEST at Stand 100A yesterday.

Today is the final day of the exhibition, and we’ll be happy to meet our customers and partners at the FEBEST stand.

📍 Stand 100A
📍 Carnivore Exhibition Grounds, Nairobi
📅 June 5 – Final Day

See you today!

Day 1 in Nairobi is done!

Thank you to everyone who visited FEBEST Kenya today at Stand 100A. We were glad to meet our partners, customers, and new guests in person.

If you didn’t visit us today, we’ll be happy to see you tomorrow and the day after:

📍 Stand 100A
📍 Carnivore Exhibition Grounds, Nairobi
📅 June 4–5, 2026

See you at the stand!

Front-end noise, vibration, or unstable suspension? Check the shock absorber mounting.

FEBEST SBSS-001 is a front shock absorber mounting — an important suspension component that helps secure the shock absorber and transfer loads between the strut and the vehicle body.

When this part is worn, drivers may notice knocking sounds over bumps, vibration, reduced handling stability, or a less comfortable ride. A properly working shock absorber mounting helps the suspension perform smoothly, quietly, and reliably.

Suitable for selected Subaru models, including:
Subaru Baja, BRZ, Forester, Impreza, Legacy, and Legacy Outback.

FEBEST is a smart repair solution.
Instead of replacing a larger assembly, FEBEST gives repair professionals the option to replace the specific worn component — helping reduce repair costs while keeping the vehicle in proper working condition.

FEBEST Kenya works B2B only — for auto parts shops, wholesalers, workshops, garages, and service centers.

Call / WhatsApp: +254 794 302 450
Email: [email protected]

Reliable braking starts with the right component.

FEBEST 0478-H77 is a rear wheel brake cylinder for Mitsubishi vehicles.

This part works inside the drum brake system. When the driver presses the brake pedal, the cylinder transfers hydraulic pressure to the brake shoes, helping the vehicle slow down safely and consistently.

A worn or leaking brake cylinder may cause:
— reduced braking performance;
— uneven braking;
— a soft brake pedal;
— brake fluid leakage near the rear wheel.

FEBEST 0478-H77 is suitable for selected Mitsubishi models, including Outlander, Airtrek, Pajero / Sh**un Pinin, Space Wagon, Space Runner and Chariot Grandis — depending on year, market and vehicle specification.

At the same time, the FEBEST range includes rear wheel brake cylinders and repair kits for different vehicle brands and models. This helps workshops and auto parts shops find the right repair solution for a specific vehicle.

FEBEST smart repair solution: when the rear brake cylinder is the worn component, it can be replaced separately instead of replacing a larger brake assembly. This makes the repair more precise, cost-effective and practical for workshops.

FEBEST Kenya works B2B only — for auto parts shops, wholesalers, workshops, garages and service centers.

Call / WhatsApp: +254 794 302 450
Email: [email protected]

Noise when turning the steering wheel or uneven front suspension performance? Check the front shock absorber bearing.

FEBEST HB-002 is a front shock absorber bearing. It helps the shock absorber strut rotate smoothly with the steering system and reduces unnecessary stress on the front suspension components.

When this part is worn, the suspension may feel harsher, steering may become less smooth, and unusual noises can appear when turning or driving over bumps.

Suitable for a range of models, including Honda Jazz / Fit, Honda City, Honda Fit Aria, Honda Insight, Honda HR-V, and selected other models depending on year and market. For accurate fitment, we recommend checking by VIN or catalog.

FEBEST is a smart repair solution.
Instead of replacing the entire assembly, FEBEST allows you to replace the specific worn component — practical, cost-effective, and convenient for repair.

FEBEST Kenya works B2B only:
for auto parts shops, wholesalers, workshops, garages, and service centers.

Call / WhatsApp: +254 794 302 450
Email: [email protected]