Automobile-Tech
Share
We are a bunch of enthusiastic Automotive Designers, Engineers, and Coders who has started this firm
29/11/2020
Freelancing of BOT HELMET PAINTING AUTOMATION.
A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along with the cylinder, in either direction. The four separate strokes are termed:
Intake: Also known as induction or suction. This stroke of the piston begins at top dead center (T.D.C.) and ends at bottom dead center (B.D.C.). In this stroke the intake valve must be in the open position while the piston pulls an air-fuel mixture into the cylinder by producing vacuum pressure into the cylinder through its downward motion. The piston is moving down as air is being sucked in by the downward motion against the piston.
Compression: This stroke begins at B.D.C, or just at the end of the suction stroke, and ends at T.D.C. In this stroke the piston compresses the air-fuel mixture in preparation for ignition during the power stroke (below). Both the intake and exhaust valves are closed during this stage.
Combustion: Also known as power or ignition. This is the start of the second revolution of the four-stroke cycle. At this point, the crankshaft has completed a full 360-degree revolution. While the piston is at T.D.C. (the end of the compression stroke) the compressed air-fuel mixture is ignited by a spark plug (in a gasoline engine) or by heat generated by high compression (diesel engines), forcefully returning the piston to B.D.C. This stroke produces mechanical work from the engine to turn the crankshaft.
Exhaust: Also known as an outlet. During the exhaust stroke, the piston, once again, returns from B.D.C. to T.D.C. while the exhaust valve is open. This action expels the spent air-fuel mixture through the exhaust valve.
31/07/2020
The main parts of any four wheel drive system are the two differentials (front and rear) and the transfer case. In addition, part time systems have locking hubs, and both types of systems may have advanced electronics that help them make even better.
Follow us
@ Atvcalculations
14/07/2020
TVS Motor Company, the flagship company of TVS Group, is the third-largest two-wheeler manufacturer in India. The company manufactures a wide range of two-wheelers from mopeds to racing motorcycles.T.V. Sundaram Iyengar began with Madurai’s first bus service in 1911 and founded T.V.S, a company in the transportation business with a large fleet of trucks and buses under the name of Southern Roadways. In the year 1979 TVS Group company Sundaram-Clayton Ltd started Moped Division at Hosur to manufacture TVS 50 mopeds.
FOLLOW US
@ Atvcalculations
BAJA SAE is an intercollegiate design competition run by the society of automotive engineers.
The goal in Baja SAE racing is to design, build, and race off-road vehicles that can withstand the harshest elements or rough terrain.
FOLLOW US
In 1960 race car driver Paul frere asked Ferrari at le mans why the Ferrari 250 TR had a limited speed since the car had quite an impressive windshield. Enzo Ferrari responded, in his own words, that you don't need to worry about aerodynamics if you build a superb motor.
08/07/2020
Enzo Ferrari Car
Built-in 2002, the Enzo Ferrari — named after the famed founder — is a sports car with a 12 cylinder engine and with a top speed of 218 mph.
Enzo Anselmo Ferrari was born on February 18, 1898, in Modena, Italy. The second child of parents Adalgisa and Alfredo, a metal worker, Ferrari was bitten by the racing bug at age 10, when his dad took him to watch a motor car race in Bologna.
In 1919, Enzo Ferrari moved to Milan to work as a test driver for Costruzioni Meccaniche Nazionali. Given the chance to compete with the company's racing team, he made his debut at the 1919 Parma-Poggio di Berceto Hillclimb race, finishing fourth in his division. He left CMN the following year to join Alfa Romeo.
FOLLOW US
@ Atvcalculations
08/07/2020
The general layout of Renault's 2004 R24 F1 car.
Follow us
@ Atvcalculations
05/07/2020
SAE BAJA started in California, USA and spreaded all over the world as mentioned in the image.
Follow us
04/07/2020
The history of Tesla and Elon Musk: A radical vision for the future of automobile.
Tesla is founded by Martin Eberhard and Marc tarpenning. The engineers become CEO and CFO respectively. Eberhard and trapenning were inspired to create the company after general motors ended its ev1 program and destroyed the electric cars. They named Their company after famed inventor Nikolas Tesla, a pioneer in electricity.
Follow us
# @ Atvcalculations
I will highly recommend you to read the autobiography of Elon Musk it very inspiring.
Follow us
Click here to claim your Sponsored Listing.
Category
Website
Address
Pune