Thinkgenix

LapPi Version 2 Coming Soon!
LapPi is a modular, DIY laptop kit built around everyone’s favorite single-board computer Raspberry Pi

GPS-RTK HAT for Raspberry Pi UBlox GNSS Module | Centimeter-level Accuracy | Multi-Brand RTK | 1.14" LCD | 4 LEDs | USB Type | 40 Pins GPIO | Antenna

👉 Launching this week on
𝗔𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗼𝗻 𝗞𝗶𝘁 Based on Powered By microcontroller and comes with onboard .
Automate your 𝑨𝒑𝒑𝒍𝒊𝒂𝒏𝒄𝒆𝒔 𝒖𝒑 𝒕𝒐 𝒂 5𝑲𝑴 𝒓𝒂𝒏𝒈𝒆 𝒘𝒊𝒕𝒉𝒐𝒖𝒕 𝑰𝒏𝒕𝒆𝒓𝒏𝒆𝒕. https://bit.ly/3QjBZS9

AiryFi : Air Quality Monitoring Station based on ESP8266 PMSA003 Sensor | PM 1.0 | PM 2.5 | PM 10 | Battery 3.7 V | Onboard 1.14" TFT | ESP8266-12E | Type C | BME280 humidity sensor

PiSquare - Now Live On !
Connect Multiple Raspberry Pi HATs Wirelessly without multistacking.
an & ESP8266-12E based board, a smart way to use multiple Raspberry Pi HATs without Multistacking https://bit.ly/3uk5OIY

Barcode HAT For Raspberry Pi Barcode HAT for Raspberry Pi is a robust and compact barcode scanner board that consists of a DE2120 scanner module, buzzer, 1.14” LCD screen, micro-USB port. It is designed to scan 20 different barcode symbologies in the segment of both 1D and 2D symbology like barcodes and QR codes. The design o...

𝐑𝐚𝐧𝐠𝐞 -𝐏𝐢 “Plug and Play LoRaTM Dongle”
👉𝐅𝐫𝐞𝐞 𝐃𝐞𝐥𝐢𝐯𝐞𝐫𝐲 𝐖𝐨𝐫𝐥𝐝𝐰𝐢𝐝𝐞
👉𝟐𝟔% 𝐎𝐟𝐟 𝐓𝐢𝐥𝐥 𝟐𝟓𝐭𝐡 𝐌𝐚𝐫𝐜𝐡
Range-Pi- LoRaTM Dongle based on Raspberry Pi and LoRaTM Modules https://bit.ly/3LLTmcE

Roundy : Round LCD Board based on RP2040/ESP-12E Onboard RP2040 | 1.28" LCD | 240 x 240 Resolution | Operating Voltage 3.3 V | 65k RGB Color | GC9A01 | ESP-12E

Coming soon: Roundy : Round LCD Board based on Pico Have fun with stylish and compact LCD!

𝐍𝐨𝐰 𝐋𝐢𝐯𝐞 𝐎𝐧 𝐊𝐢𝐜𝐤𝐬𝐭𝐚𝐫𝐭𝐞𝐫! 🎉🥳
Zero RP2040 : Based Board on Pi Zero Form Factor
RP2040 Chip | Micro-SD Card Slot | 64 MB Flash Memory | Two Buttons | Micro-USB Power Supply Port | Standard 40 Pins https://bit.ly/3nLZNSF

UPS HAT For Raspberry Pi 5V Operating Voltage | 0.91" LCD Display | Raspberry Pi 40 Pins GPIO Header | I2C Bus Communication | Battery Warning Indicator

Getting Started with LoRa™ HAT for Raspberry Pi Introduction LoRa HAT a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125VTo get started with your LoRa™ HAT with your Raspberry Pi computer you’ll need the following accessories...