R3 - Race and Rally Repairs

*FOR SALE*

Subaru N10 Prodrive Rally car now running in B13

This is a well presented rally car originally built by Prodrive with only 2 former owners Rory Hall and then Paul Bonas
And in recent It’s been maintained regardless off cost by EJM preparation in Warwickshire and recently undergone many upgrades with the Idea of Paul campaigning the car in 2025, but because of change of plans and Paul finding an R5 this car it’s now up for sale,

It’s had a new engine built by Thwaites Developments in Warwick to include all new upgraded internals with invoice for parts showing almost £20’000 to include new intercooler, turbo and engine management system and mapping
The suspension has been fully rebuilt at a cost of over £4000.00 by Giles Phillips at GPM in Preston,
All receipts are available to show the work carried out and will come with the car.

-Full Prodrive Shell with all the usual extras and amazing attention to detail that come with a Prodrive car
-New Forged B13 engine built by TDR to fantastic spec with no expense spared
-New Link Engine Management system mapped with 2 maps with a simple flick of a switch for Carless and Super unleaded.
Also mapped with ALS (anti lag) FFS (flat shift) and LC (launch control)
-Fully rebuilt and serviced Ohlins 3 way adjustable suspension
-6 speed gear box with DCCD and Flat shift
-Hydraulic hand brake with Diff release
-Full SS quick release exhaust system
-Sparco wrap round seats dated until end of 2027
-6 point TRS seat belts dated until 2027
-New light weight Life line electric fire extinguisher system
-Premier bag tank with FIA fuel filler
-Bias pedal box with dash adjuster and AP master cylinders
-4 pot front brakes
-2 pot rear brakes
-Monit trip metre
-Zeronoice Brave intercom system
-Carbon foot trays
-Carbon door cards
-Carbon Mirrors
-Plastic windows
-Heated front screen
-Roof vent
-Sparco steering wheel and Momo boss
-Flock dash boards
-etc etc.
-The cars fully guarded underneath. Starting with a Prodrive Sump/ gear box guard then Kevlar underbody protection and then onto polycarbonate flexible sheet to protect the rear subframe and suspension along with an Alloy rear diff guard.
Some battle scars can be seen around the car but nothing major and nothing that would really bother you!
The car is ready to go and do an event with a new engine and all fresh fluids.
The car will come with an impressive history folder of work carried out and parts it’s had over the years and will also come with MSA log book 12 months MOT, 10 Speed line wheels with gravel tyres and some light spares.

Being a Prodrive car this won’t go down in value and will one day be eligible for historic rallying.

£34’000

If you have any questions or would like more information please message or call 07976958309

Can deliver anywhere if needed

Thanks for looking,

*FOR SALE*

-Grp 4 MK2 Es**rt
-MK 1 Mini Cooper S
-Prodrive Subaru N10

More details coming soon 😎

*FOR SALE*

MK2 Es**rt Grp 4 modern spec shell

This shell has been blasted and primed to stop it turning, there is no filler or sealer in this shell what so ever, it’s a nice straight shell,
We’ve had this shell on our global jig fitted new rear quarters, front inner wings and front and rear back panels, it could’t be any straighter fitted with large rear tubs and alloy fire wall.
We don’t know who did the shell originally but it’s a nice job.
Its 6 linked and is fitted with Custom cages multi point weld in roll cage through the front bulk head onto the front struts,
It’s also fitted with side sill stand tubes, it does need new seat rails fitting.

The shell comes as it is but could come with, wings bonnet boot and doors at an extra cost. And as mentioned seat rails

Priced to sell at £12’000

Considering a good donor shell is 6-7k plus the grp 4 parts plus the fabrication plus the roll cage and fitting we think this is a fair price,

If you have any questions or would like more information please message,

Can be delivered anywhere

Thanks for looking

*SOLD*

Historic MK2 Es**rt Rolling Shell with Engine

Grp 4 Shell, 5 linked with panhard rod, seam welded where needed and fitted with top mount plates, gussets along with strut brace and bulk head plates, fitted with side sill stand tubes and the latest spec seat mount bars, Safety Devices Bolt in roll cage
This shell has been partly dry built but then change of plans forces the sale,
The car comes with the following part all of which are new:
-Wales motorsport wiring loom complete loom with stack gauges and stalks (amazing loom)
-MST wiper motor kit with arms and blades
-Drivers and Co- Drivers foot trays
-Race and competition equipment steering column, quick rack and knuckle,
-Race and competition equipment WCXM
-Bilstein coil over suspension with Grp 4 bearings/ hubs and wheel stud kit
-Adjustable Bias pedal box with Girling cylinders accelerator pedal and dash adjuster
-Front APCP2361 Forest callipers
-Rear axle is Double pinned thick tube atlas axle case (57” finished width) with Fully floating alloy hub, 18t Heavy duty half shafts, 264mm solid discs with
AP CP2577 callipers, Blackline Plate L*D 45/45 ramps 90lbs preload with 4.6 CWP,
3/8 Grp4 diamond brackets, Panhard rod bracket, Steel rear cover, 10mm Alloy brace, Braided brake lines
-Also comes with Anderson Race engines 2.0 Pinto with Twin 45s and full Stainless 3” exhaust system
-Alloy grp 4 radiator and fan
-Alloy baffled fuel tank with straps, filler pipe and filler tray.
-2 red top fuel pumps with fittings and tray,
-Fuel pump regulator
-Alloy spare wheel post
-Samco hose kit
-Full set of moulded mudflats
-Fibre glass bonnet with bonnet pins
-Fibre glass boot with boot springs
-2 good doors (not pictured)
The cars sitting on 4 new grp 4 Speedline wheels fitted with Pirelli Corsa tyres

The plan was to build this car for the RAC but as mentioned, a change of plan has been made.
This will make a really nice car it’s a shame really we couldn’t see it threw.
Comes with ID and many receipts for parts,

Been sold at a very reasonable price of SOLD

If you have any questions or would like more information Please message,

Can be delivered anywhere if needed

Thanks for looking.

*SOLD*

Mitsubishi L200 Barbarian DI-D Auto

This is a lovely pick-up and as you can see in the photos its in fantastic condition, and being the Barbarian model it comes fully loaded with:
-Heather leather seats
-Electric windows all round
-Electric windows
-Cruse control
-Blue tooth
-Hands free
-Dab radio
-Steering wheel controls
-Climate control
-A/C
-Large screen display
-USB/ Aux and 12v adaptors
-Alloy wheels with 4 good tyres
-Tow bar
And I'm sure much more,

We've owned this pick up for 2 years, its only been used for light use the rear is lined with the factory tub and is in near perfect condition, its also fitted with the factory locking lift up cover,

The vehicle had been maintained at 6 month intervals since we've owned it, it starts and drives absolutely perfect its covered 123k miles, it comes with 2 sets of keys, service pack and wallets showing full main dealer servicing it has 3 previous keepers and has MOT until April 2026

Any RAC or AA inspection welcome

If you have any questions or would like more information please message or call 07976958309

Delivery can be arranged anywhere if needed and we can take debit or credit card if it helps,
we can also arrange finance

Priced to sell SOLD plus vat

Thank You for looking

This lovley looking Grp 1 Es**rt came to us after a light roll whilst testing with Ian Ross at rallyschool.co.uk we carried out the panel and paint work then it was collected by Edd at EJM Preparation to get it ready for the Woodpecker Rally

The shine on this in the sun! 😳😘
Once the panels are done and it’s built back up it will look amazing.

This great looking car has come to us from Delta Works.. and believe it or not.. it’s a 1 owner car.. 😳
Delta Works have carried out all the fabrication repairs and then it’s been handed over to us for prep and paint..
we do love a Red Evo painted in 159! 😎

Now into the panels.. 😘

These panels came in to have the red stickers removed and the maroon stripe painted on with a nice gold pin stripe and a fresh coat of lacquer to finish them off! 😘🤓

This lovely Mexico came into us for paint work, it’s been off the road a long time and the customer did all the repairs and fabrication on the shell himself. Came out really nice. Everyone was pleased. And now he’s got something to do in the evenings 😁

MK2 RS 2000 in for a full strip and respray back to its original Red… we carried out abit of welding work as we went along.. now back with its owner, he can now started the fun part of building it back up.. 🤓

Ford Fiesta R5 Body shell with all new panels in for a repair, prep and paint, this shell came to us from MSL Motorsport they asked us to prep and paint the full shell add Raptor to the underside, paint all the panels in side and out with new bumpers and wings, then black out the roll cage around the screen, so we did! 🤷🏼‍♂️
considering what we started with we’re happy with the outcome., 😘😎
M-Sport