Schumacher R/C Racing

🔈 New for the CAT PB is this Titanium Chassis! 🔈

This Titanium Chassis gives your CAT PB a smoother, more predictable feeling buggy.

The team have found this stiffer chassis adds consistency and confidence over a run.

A controlled front end feel provides comfort in all conditions.

The chassis is 20g heavier than the kit alloy chassis.

U9574 - Titanium Chassis - CAT PB

🔗⬇️

New from CORE RC is this Performance Brake Cleaner. 💨

Brake cleaner is universally used in RC for cleaning and degreasing a wide range of items.

This particular brake cleaner is excellent for rubber tyres but uses could also include; bearings, diff parts, drive shafts, foam tyres, body scuffs, electrical contacts, double sided tape stickiness/residue, motors, Sharpie/marker pen writing etc etc etc

Combine it with the CR748 - CORE RC Bearing Cleaning Shaker for the ultimate bearing cleaning solution!

- 500ml
- Powerful Spray

🔗⬇️

Transverse LiPo Mount Set for the CAT 2000 'Classic' now available !

The Transverse LiPo Mount repositions the battery from an offset longitudinal position, into a central transverse position. This brings the mass of the battery along the vehicle’s centreline, reducing the car’s roll inertia and improving direction change.

The balance of the car can be further enhanced by the ability to move the battery side to side and fore-aft (via 2 positions). The belt is guided over the battery using a power roller, mounted from a central Aluminium Alloy Brace. The belt tension can be adjusted.

(Max 20mm height LiPo's only)

🔗⬇️

Team Schumacher dominate the INS 🇺🇸

2wd Mod 🥇 🥈 🥉
4wd Mod 🥇 🥈 🥉
13.5 Expert 4wd 🥇 🥈 🥉
17.5 Expert 2wd 🥇
13.5 Stadium Truck 🥈

It was great throughout qualifying and fantastic in the finals too. The guys did amazing and brought home the wins in several classes.

2wd Mod:
P1 - Tom Rinderknecht (TQ)
P2 - Daniel Kobbevik
P3 - Broc Champlin
P5 - Brennan Schimmel
P7 - Nate Sutherland

4wd Mod:
P1 - Daniel Kobbevik (TQ)
P2 - Brennan Schimmel
P3 - Broc Champlin
P5 - Tom Rinderknecht
P8 - Nate Sutherland

13.5 Expert 4wd
P1 - Domnic Paccione (TQ)
P2 - Maccoy Martin
P3 - Daniel Chavez
P4 - Braeden Banci
P8 - Ryder Himanek
P10 - Andrew Thomas

17.5 Expert 2wd
P1 - Daniel Chavez (TQ)
P4 - Maccoy Martin

13.5 Stadium Truck
P2 - Ryder Himanek

40+ 2wd Mod
P4 - Jamie Thompson
P10 - TJ Bradley

40+ 4wd Mod
P4 - Jamie Thompson
P5 - TJ Bradley

The Cougar LD3, CAT PB and Storm ST2 were awesome!

A huge thank you to Elite RC, JConcepts and Island Speedway for all of their work at the event.

Thanks to JConcepts for the 📸

Congratulations to Schumacher drivers Ben Cane and James Snashall winning the Schumacher Supported King of Clubs RC Series at Aldershot in the UK this last weekend. 🏆🏆🏁

Well done guys!

Ben's Mi10 and James's FT9 were looking good !

Team Schumacher on 🔥 at the INS.

TQ’s and top qualifying positions after round 1 so far:

2wd Mod :
P1 - Tom Rinderknecht 🥇
P3 - Broc Champlin
P4 - Brennan Schimmel
P5 - Nate Sutherland
P7 - Daniel Kobbevik

4wd Mod:
P1 - Daniel Kobbevik 🥇
P2 - Brennan Schimmel
P3 - Broc Champlin
P6 - Tom Rinderknecht
P10 - Nate Sutherland

Expert 17.5 2wd:
P1 - Maccoy Martin 🥇
P2 - Daniel Chavez
P8 - Ryder Himanek

13.5 Expert 4wd:
P1 - Maccoy Martin 🥇
P2 - Daniel Chavez
P5 - Andrew Thomas
P7 - Braeden Banci
P8 - Ryder Himanek
P10 - Domnic Paccione

13.5 Stadium Truck
P2 - Ryder Himanek
P9 - Zack Mazurek

In both 40+ 2wd & 4wd classes, Jamie Thompson and TJ Bradley are doing great and well on the pace too.

This JConcepts event is being held at Island RC Speedway, Muscatine, IA. USA 🇺🇸

The best of luck to all of the team for the remainder of the weekend.

A quick reminder about the hugely popular SkyRC Digital Ride Height Gauge.

In stock in good numbers!

➡️ Why Ride Height Matters ⬅️
Ride height influences CG, corner balance, and overall grip.
With accurate height measurement, millimetres turn into meaningful adjustments—so small changes become intentional and repeatable. The result is more predictable handling, improved consistency, and better performance on track.

🔗⬇️

New for the CAT PB are these wide rear suspension straps. 😎

The +3mm Wide Rear Straps for the CAT PB offer increased bump handling whilst also providing added stability through higher speed sections.

A narrower rear hex will be needed to allow the width of the car to remain the same. To keep the same width the hex width must be reduced by 1.5mm each side.

The team also recommend shortening the rear link on the hub and softening the rear spring by one rate when changing to these straps.

The straps must be used as a pair.

You will find the most benefit from these straps in medium to high grip conditions.

🔗⬇️