Test Meter
Share
Founded in 2004, Test Meter is the UK’s leading specialist in test and measurement equipment To learn more, visit www.test-meter.co.uk
Based in Leeds, West Yorkshire, Test Meter Group Limited (formerly PAT Training Services Ltd.) was first established as a PAT training and PAT testing equipment provider. Naturally expanding the company portfolio, we are now renown industry experts for test and measurement equipment in the UK and trusted by many worldwide, with our product range and expertise encompassing electrical testing; thermal imaging; environmental and temperature measurement; HV, utility and industrial equipment; gas, HVAC and building instruments.
30/09/2026
Confidence below ground starts above it.
Before work begins, dependable cable avoidance equipment helps support safer planning, site decisions and informed underground detection work.
This promotion is available for a limited time only, when you purchase any Radiodetection C.A.T & Genny Cable Avoidance Kit, you get a FREE accessory worth up to £345.
Eligible kits include:
✅ CAT4 & Genny4 Cable Avoidance Kit
✅ CAT4+ & Genny4 Cable Avoidance Kit
✅ gCAT4+ & Genny4 Cable Avoidance Kit
Choose one of these free accessories:
🎁 Standard Sonde 33kHz
🎁 Genny Clamp 4" / 100mm
Promotion is available while stocks last.
Explore the Radiodetection range 👉 https://www.test-meter.co.uk/building-surveying/cable-avoidance-and-precision-locator-tools/cable-avoidance-tools-signal-generators?testmeter_manufacturer=Radiodetection&price=1100-2000
🔍 Save 15% on FLIR Si2 Acoustic Imaging Cameras
From 1st September – 31st October 2026, you can save 15% on selected FLIR Si2 acoustic imaging cameras at Test Meter.
The Si2 range helps maintenance professionals improve uptime, efficiency and energy savings by making it easier to locate problems quickly.
Including the FLIR Si2-LD and Si2-Pro.
👉 Shop the promotion here: https://www.test-meter.co.uk/high-voltage-utilities/partial-discharge-detection/partial-discharge-diagnostics?testmeter_manufacturer=FLIR
Teledyne FLIR
T&Cs apply. Promotion available for a limited time.
Gas safety isn't the place for guesswork.
It's Gas Safety Week, and there's no better time to ask: When were your gas appliances last checked?
Boilers, cookers, fires and other gas appliances should be checked every year by a qualified Gas Safe registered engineer to help make sure they're working safely.
It only takes one check to give you greater peace of mind.
And to the engineers doing these checks in homes across the country, thank you for helping keep people safe.
TAKE NO CHANCES!
Find more advice at www.GasSafetyWeek.co.uk
16/09/2026
🎙️ Another Talks with Test Meter recording in the bag!
Yesterday, we joined Anders Rand Anderson, Founder & CEO, and Søren Thisted, Senior DevOps Engineer at emazys_solar, over at Distorted for our latest podcast recording.
We’ll be talking about who Emazys are, exploring the Emazys Z300 family, and looking at the exponential reality of solar power as the global installed base continues to grow. ☀️
Plenty of great conversation to come — watch this space for the full episode!
When choosing a thermal camera, it’s easy to focus on resolution, temperature range and sensitivity — but what about the lens?
From wide-angle lenses for working in confined areas to different fields of view for targets further away, the right optics can make a huge difference to how useful your camera is on the job.
Jason Cargill from Teledyne FLIR explains why interchangeable lens options are worth considering when choosing a premium thermal imaging camera.
What matters most in your work: wider field of view or being able to inspect from further away?
09/09/2026
Heating season is here, and being properly equipped matters. 🔥
From boiler servicing to refrigeration work, Test Meter has teamed up with Testo UK to help engineers prepare for the busiest months of the year.
Purchase any testo 327 or 300+ flue gas analyser and get:
✅ Special Promo Pricing
✅ A FREE gift from Test Meter
✅ Your 1st Year Re-Calibration FREE when you sign up and register to the Testo Instruments Manager.
Choosing a testo 558s digital manifold kit? You’ll also get your 1st Year Re-Calibration !
📅 Offer available until 31st December 2026
👉 https://www.test-meter.co.uk/testo-promotions
Buy a Fluke. Get rewarded. 🎁
If you’re planning to add some new Fluke Corporation test equipment to your toolkit, now could be a very good time to do it.
Until 31st December 2026, purchase a qualifying Fluke product from Test Meter and you’ll earn 1 reward point for every £1 spent. Your points can then be redeemed against a range of FREE Fluke gifts, from handy accessories right through to Fluke test equipment.
See the qualifying products, rewards and full promotion details here 👇
🔗 https://www.test-meter.co.uk/blog/buy-a-fluke-get-a-free-fluke
04/09/2026
Don’t let the end of summer slow down your solar workload. ☀️⚡
The Seaward PV:1525 Series is built to make PV testing quicker, easier and more efficient across residential and commercial installations.
✅ Compact, handheld design
✅ Built-in test sequences to save time on-site
✅ 1500V capability for modern solar arrays
A smart choice for installers who want to get more testing done with less hassle — before winter really sets in. 🥶
Available here: https://www.test-meter.co.uk/seaward-pv-1525-solar-pv-tester
Don’t wait until summer is over! ☀️
The PV:1525 Series is built for fast and accurate testing on residential or commercial installations.
🌇Compact and handheld design. Easy to use in restricted spaces or at a height.
🌇Intuitive navigation and in-built test sequences. Save time and test quickly.
🌇1500V capabilities. Engineered for modern arrays.
Save time before winter arrives! 🥶
https://www.seaward.com/gb/products/solar/solar-pv-testers/601a911-pv-1525/
02/09/2026
Buy the Fluke you need. Earn the tools you want.
Fluke’s seasonal promotion is back with even more flexibility.
From now until 31st December 2026, purchase any qualifying Fluke product from Test Meter and get:
⚡ 1 point for every £1 spent
🛠️ Redeem points for free tools
📈 or save towards bigger rewards
So if a Fluke was already on the wishlist, now’s a very good time to make it happen.
Explore the promotion 👉 https://www.test-meter.co.uk/blog/buy-a-fluke-get-a-free-fluke
Do you know where your test equipment actually goes when you send it away for calibration or servicing?
Being able to drop an instrument off locally can make the process feel straightforward, but there can be much more happening behind the scenes. In this clip, Test Meter MD Lasse Tonnesen, Business Development Manager Chris Fox and Head of Marketing Mike McCarthy discuss why it’s worth understanding who will be working on your equipment, where it will be serviced, what accreditation is involved and what that could mean for turnaround time.
The clip comes from Episode 8 – “The Forgotten Costs Of Ownership In Test Equipment” of the Talks with Test Meter Podcast, which explores some of the less obvious costs and considerations involved in owning professional test equipment.
🎥 Watch on YouTube: https://www.youtube.com/watch?v=zLwXf2EKiGw
🎧 Listen on Spotify: https://open.spotify.com/episode/155Kd8kWSGlvOZaw1g2H10?si=e06d2bf0347c4738
🎧 Listen on Apple Podcasts: https://podcasts.apple.com/gb/podcast/episode-8-the-forgotten-costs-of-ownership-in/id1773734524?i=1000705515501
Click here to claim your Sponsored Listing.
Category
Website
Address
Test Meter, 1 Aston Court, Town End Close
Leeds
LS132AF
Opening Hours
| Monday | 8am - 5pm |
| Tuesday | 8am - 5pm |
| Wednesday | 8am - 5pm |
| Thursday | 8am - 5pm |
| Friday | 8am - 5pm |
Alerts
Be the first to know and let us send you an email when Test Meter posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.