Rodzillauk
Share
Here at Rodzilla we create custom 3D printed Rod caddies. Complete with a folding tripod & fly box.
31/05/2026
🦖 It was about time Rodzilla got himself a little mascot… 😎
Meet Baby Rodzilla.
Not quite as terrifying as Daddy Rodzilla yet, but give him time… he’s already got the attitude, the teeth, and absolutely zero respect for personal space. 🤣
For scale, the big lad next to him is Daddy Rodzilla, which took just over 4 days of printing to bring to life. Layer by layer, hour after hour, and more than a little patience.
The original plan was simply to print a small desk companion for the office…
Now we’re not entirely sure if these two should stay as one-offs or whether a few more might accidentally find their way into existence. 👀
No promises.
No launch date.
Not for sale.
…yet. 😏
What do we reckon?
👍 Baby Rodzilla
❤️ Daddy Rodzilla
🔥 Both need to happen
:
13/05/2026
🚨 Right then… apparently Rodzilla owners now require air support. 🚨
Malcolm Proctor came to us with a completely normal and reasonable request…
“Can you make my Rodzilla carry a DJI Neo 2 drone setup?”
Because clearly just carrying rods, fly boxes, and half a tackle shop wasn’t enough anymore. 😂
Now… this one was an absolute nightmare but in a fun way.
To make something fit properly we ideally needed the actual drone in hand… which we DIDN’T have. So this became a full blown engineering experiment involving online dimensions, scaling photos like forensic investigators and enough failed prototypes to start our own recycling centre. 😅
BUT…
After far too many hours and several moments of “this is never going to work”…
We’ve done it. 👀🔥
Introducing the Rodzilla DJI Neo 2 setup:
✅ Fully detachable rear mounting bracket
– Bolts directly onto the side mounting points
– Rock solid once fitted
– Fully removable when you inevitably decide to strap something even more ridiculous to it later
✅ Custom slimline hard drone case
– Magnetic lid
– Proper snug fit for the Neo 2 and antennae
– No rattling around like a Kinder Egg toy in a washing machine
✅ Modified fly box insert
– Because apparently flies are old news
– Now holds 3 spare drone batteries neatly inside 👌
We’re still waiting on Malcolm’s photos of the full setup loaded up properly…
But for now… here’s the teaser shot of the caddy with the case installed 😎
Honestly at this point Rodzilla is about 3 upgrades away from becoming a Transformer.
So… what next?
Keep watching as the recently released dock could be more than just something to screw to your garage wall.
We still have a shortage on the forest green filament😢
but
I have sourced a few trial rolls of a carbon fibre reinforced green filament, going to do some test prints and report back, it will not significantly alter the weight but it might look damn good.👀🔥
🦖⚠️ NEW RODZILLA ADD-ON ALERT ⚠️🦖
You lot asked for more…
So naturally we took a simple idea and completely over-engineered it 😎🔥
Introducing…
💀 THE RODZILLA DOCK 💀
Originally inspired by Tony Hall, who wanted a way to mount his Rodzilla onto his Milwaukee-style tackle box for loch fishing without carrying rods around like a confused octopus 🐙🎣
And honestly… once we started prototyping it, things escalated quickly 👀🔥
🦖 Mount it vertically on your tackle box
🦖 Wheel your setup straight to the boat like a tackle warlord
🦖 Mount it on your garage wall for the cleanest Rodzilla storage setup around
🦖 Or mount it horizontally and keep fully made-up rods locked and loaded 😮⚡
No more:
❌ rods thrown in corners
❌ balancing setups against walls
❌ “carefully” laying £££ rods on the floor
❌ looking like you’re moving house every fishing trip
This thing is SIMPLE… but also kinda dangerous… because now our brains are running away with ideas 👀🧠🔥
Because here’s the question…
Is the Dock JUST a mount… 🤔
…or is this the start of a whole modular Rodzilla ecosystem with future attachments, upgrades and stupidly cool add-ons coming later? 😈🦖⚙️
Soon we’ll have photos of Tony’s actual loch fishing setup in action — and trust us, it looks absolutely savage 🔥
So…
How would YOU use yours?
🎣 Boat setup?
🛞 Box-on-wheels?
🚐 Van build?
🧱 Garage wall?
🦖 Tactical fishing command centre?
Drop your ideas below
10/05/2026
🔥 SAFE TO SAY THE TROUT DIDN’T STAND A CHANCE TODAY… 🔥
Massive session from Owen Bufton, son of the one and only Andrew Bufton — the man responsible for tying some absolutely deadly flies 🎣💀
Judging by this haul, Andrew’s patterns were clearly doing unspeakable things underwater again… the trout must’ve seen those flies and simply accepted their fate 😅
Catching that many fish is one thing… carrying them, rods, gear and everything else back round the lake is another story entirely 👀
Luckily the Rodzilla was on hand to make the mission that little bit easier 💪🎣
Proper result lads 👏
Deadly flies 🤝 overbuilt rod caddies = dangerous combination.
Firstly, the boring stuff… 😩
Forest Green PETG filament is currently unavailable from our supplier, so we are having a few supply issues on Green builds at the moment.
We do have plenty of other colours available, but I know how much you lot love the Green setups 👀
We are working hard to source a suitable replacement whilst the supplier tries to get stock back in, and we’ll keep everyone updated as soon as we have a reliable option locked in.
In the meantime, this might be the perfect excuse to build something a little different… 😎🔥
WARNING ⚠️
The following may cause excessive tackle purchases, irrational excitement, and your current Rodzilla to suddenly feel incomplete… 👀🔥
We absolutely LOVE the messages and emails you lot send asking:
“Can you make something a bit different?”
Honestly… some of you are completely unhinged with the ideas 😂 and we are here for it.
So whilst the rest of the world is busy pumping out boring fishing accessories… we’ve been locked away designing TWO brand new modular Rodzilla add-ons 😎
And when we say modular… we mean PROPER Rodzilla modular.
Fully upgradeable.
Fully interchangeable.
Fully capable of making your current setup look like it skipped leg day 💪😂
Now obviously we’re not just going to come straight out and show the whole thing… where’s the drama in that?
So for now… here’s a little teaser shot of ONE small part from ONE of the new accessories currently being tested 👀🔥
We’ll happily take the credit for making and designing it… BUT we can’t take credit for the original idea on this one.
Huge thanks to Tony Hall for basically throwing down the challenge and forcing us to engineer this madness into existence 👏😂
And yes… it works even better than we hoped 😎
More chaos coming soon 🔥
15/03/2026
🔥 RODZILLA FLASH SALE – 24 HOURS ONLY 🔥
To celebrate Mother’s Day, we’re doing something a little special…
For the next 10 Rodzilla orders placed in the next 24 hours, we’ll include a second Rodzilla Fly Box absolutely FREE.
All you have to do is comment “MOTHERSDAY” when you order so we know to include it.
Some of this week’s builds are shown below — brilliant colour combos coming through lately. As always, you lot are getting creative with the designs 👌
🎁 FREE Fly Box Slots Remaining: 10
As always:
🎣 Built to fish
🛠 Fully upgradeable
🇬🇧 Printed & assembled in the UK
Once the 10 are gone… the deal is gone.
🔥 Rodzilla Translucent Range – Just Landed 🔥
Here we are… the Rodzilla Translucent Range we hinted at previously is finally here.
We’ve been having far too much fun mixing and matching colours, and the results are absolutely 🔥
These things look insane in the sunlight… but even on those classic grey rainy fishing days they still pop and show off the internal structure of the print.
The best bit… every part can be mixed and matched:
🎣 Rod mounts
🛠 Handle
🧱 Base
📸 Tripod
Current translucent colours:
• Clear
• Orange
• Violet
• Light Blue
• Teal
• Olive
So you can build a completely custom Rodzilla exactly how you want it.
To be honest they’re that new and that hot we haven’t even managed to update the website yet 😅
If you want one of the first translucent builds, drop us a message and we’ll show you the colour combos we’ve been playing with.
🔥 Quick challenge…
If you were building your ultimate Rodzilla, what combo would you go for?
Example:
Clear base – Violet handle – Teal rod mounts – Orange tripod
Drop your build in the comments 👇
As always:
🎣 Built to fish
🛠 Fully upgradeable
🇬🇧 Printed and assembled in the UK
Here is a quick tour of Rodzilla HQ where all the magic happens
Click here to claim your Sponsored Listing.
Category
Contact the business
Website
Address
Basildon