Biomedical Engineering Solution

CAUTION YOU MUST TAKE WHILE REBUILDING A BURNT AUTOCLAVE | Biomedical Tips ⚠️

When rebuilding a burnt autoclave, one of the main things to check carefully is indeed the heating element insulation system.

I know many of you haven't even considered that...but that's why iFix Biomedical Services is a Biomedical for all!

So, let's break it down👇

In most cases after a fire burn on an autoclave the insulation system are mostly affected...which must be considered during a repair or reactivation.

You must thoroughly check the heating element and it's insulation assembly and rebuilt if damaged by fire or heat.

Key steps include to achieve that:

-Check the element insulation materials (mica sheets, ceramic beads, fiberglass sleeves, or asbestos-free thermal insulators) for burns, cracks, or carbonization.

-Ensure proper isolation between the element terminals and the autoclave metallic body .... there must be no electrical continuity between them.

Use insulation resistance tester to confirm that insulation resistance is above 1 MΩ at the rated voltage (e.g., 220–240 V).

Replace any compromised element or insulation material immediately.

Why this is critical:
If the element insulation is damaged, current leakage can occur; meaning when 220 V or 340 V passes through the element, it can leak to the metal body, making the autoclave body electrically live and dangerous to touch.

I hope this helps 💯

Top Urgent!!!

ቆይ ምን አድርጉ ነው የምትሉን?
እሽ እንዴት እንኑር?
በቃ መታከሙ ይቅር እንጅ ሌላ እራብማ #ፈርመን አንቀበልም!!!

#ጤናዎበእጅዎ


Shame on U!