OBBA

Proceq Equotip Piccolo / Bambino 2
Overview
Fully integrated and handy Leeb hardness tester with a compact and robust housing. Ideally suited for quick on-site hardness tests. Optional DL probe for confined spaces and recessed surfaces. Equotip Piccolo 2 allows the transfer of the data to a PC.
For more details:https://www.proceq.com/compare/equotip-portable-hardness-testing/?fbclid=IwAR3wzB1qoAijKcVN4a1dgppKahX3WFfcQUVstTICgAKIjLtaijexZDb7yMo
Or contact OBBA

Paint Test Paint Inspection Kit
Overview
Paint Inspection Kit offers the industrial painter all the essential equipment needed for the testing of blast-cleaned steel prior to the protective coating application.
When steel has been blast-cleaned to a surface preparation of Sa 2½, the inspection of the steel to ISO Standards is required. This ISO Standard compliance ensures that blast-cleaned steel is correctly prepared for the application of protective coatings.
Supplied in an industrial Carrying Case with Testex Replica Tape / Replica Tape Gauge, Bresle Patch Test, Dust Tape Test, Dewpoint Meter, Coating Thickness Meter and Wet Film Gauge (pack of 5). Calibration Certificates with traceability to UKAS are an optional extra.
For more details:https://paint-test-equipment.co.uk/.../paint.../...
Or contact OBBA

Sonatest Sitescan 500S
Overview
Sonatest Sitescan Flaw Detectors have always meant highly reliable, technician focused and this range continues this tradition.

The Sitescan 500S offers the end user an entry level broad band flaw detector with full VGA display, sync and proportional outputs and a 50nS (Spike) 200V Pulser.

Typical applications are Weld Fabrication, Corrosion Detection, Forgings & Castings and general UT inspection.
For more details:https://sonatest.com/products/flaw-detectors/sitescan-500s
Or contact OBBA

3m Compensating Cable Link With Thermocouple Plug To Plug For Temperature Recorder Input
Overview
To link a temperature controller/programmer thermocouple input to a temperature recorder input.

For more details: https://www.stork.com/en/cooperheat-equipment-shop/3m-compensating-cable-link-with-thermocouple-plug-to-plug-for-temperature-r
Or contact OBBA

Proceq Equotip 550 UCI
Overview
Flexible UCI hardness tester for fine-grained material with any shape and heat-treated surfaces. The patented adjustable test load enables a wide range of applications. Rugged touchscreen with enhanced software features and analysis functions. Equotip 540 for regular basic usage without extensive reporting needs.
For more details:https://www.proceq.com/c…/equotip-portable-hardness-testing/
Or contact OBBA

Paint Test Calibration Foils
Overview
Calibration Foils for calibrating Coating Thickness Meters.

Supplied in packs of eight in a protective wallet.

Special Range Calibration Foils can be supplied, made up of any 8 values as listed:
12µm , 25µm, 50µm , 75µm , 100µm , 125µm , 150µm , 175µm , 190µm , 200µm , 225µm , 250µm , 275µm , 300µm , 350µm , 375µm , 500µm , 625µm , 750µm , 1000µm , 1250µm , 1500µm , 2000µm , 3000µm. (values shown are nominal values.). PLEASE CONTACT US FOR THIS REQUIREMENT.

Calibration Certificate with traceability to UKAS is an optional extra.
For more details:https://paint-test-equipment.co.uk/product/calibration-foils/?v=fbe46383db39
Or contact OBBA

Sonatest Sitescan D-50
Overview
Sonatest Sitescan Flaw Detectors have always meant highly reliable, technician focused flaw detection equipment and this model builds on that tradition.

The Sitescan D-50 offers the end user an entry level broadband flaw detector in the popular and portable casing of the established D-Series; with a full VGA display, a 50nS (Spike) 200V, a Pulser 0.5dB gain resolution and an optional rubber boot.

Typical applications are Weld Fabrication, Corrosion Detection, Forgings & Castings and general UT inspection.
For more details:https://sonatest.com/products/flaw-detectors/sitescan-d-50
Or contact OBBA

60V, 60:16 CP Heating Element Repair Assembly
Overview
This heater repair assembly provides a cost effective method of repairing burnt out 60:16 nickel chrome heating elements by recycling heating element beads and connectors.

For more details: https://www.stork.com/en/cooperheat-equipment-shop/60v-6016-cp-heating-element-repair-assembly-one-6016-core-wire-with-welded
Or contact OBBA

Proceq Equotip 550 Portable Rockwell
Portable Rockwell hardness tester for scratch-sensitive, polished and thin parts. It features excellent sensitivity through small pe*******on of a few micrometer. Rugged touchscreen with enhanced software features and analysis functions.
For more details: https://www.proceq.com/compare/equotip-portable-hardness-testing/?fbclid=IwAR1sg7YpjnAENPjfMRbpqv5y7NerQLp5gJ-utcUJ1dKPvt2OSW-K8vypPLE
Or contact OBBA

Paint Test Paint Ferrous Probes
Overview
Non-Ferrous Probes for use with the Coating Thickness Meter.

Non-Ferrous Probes will measure all non-conductive, non-ferromagnetic coatings on conductive non-ferrous substrates.

Example: Paint on aluminium, paint on stainless steel and anodising on aluminium etc.

Calibration Certificate with traceability to UKAS is an optional extra.
For more details:https://paint-test-equipment.co.uk/product/non-ferrous-probes/?v=fbe46383db39
Or contact OBBA

Sonatest Masterscan 700m
Overview
The Masterscan name has always assured the technician of robust instrument construction combined with exceptional performance.

Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.

The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square Pulser.

Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.
For more details:https://sonatest.com/products/flaw-detectors/masterscan-700m
Or contact OBBA

Stork Cooperheat 100m Roll Of Compensating Cable
Overview
100m roll of thermocouple compensation cable. Suitable for use with type K thermocouples where custom made, additional lengths of thermocouple control, monitoring cables or thermocouple link cables are required. (Thermocouple plugs and sockets can be purchased separately as required.
For more details: https://www.stork.com/en/cooperheat-equipment-shop/100m-roll-of-compensating-cable
Or contact OBBA