Slypro

Slypro

Partager

Informations de contact, plan et itinéraire, formulaire de contact, heures d'ouverture, services, évaluations, photos, vidéos et annonces de Slypro, Magasin d’électronique, Blida.

HOTBED + GLASS (220 x 240mm) Orange ➡️ disponible chez #slypro Blida

Product Description

This HeatBed Dual Power PCB with 14AWG Cable from RepRap MK2B is compatible with any 3D printer that can accept RAMPS MK2B version of heatbed.

This Heatbed has a dual power capacity allowing it to be used with 12V or 24V power sources. It has a center mounting hole in the front to allow three point mounting. This is much easier for leveling the bed compared to the 4 point mounting.

First level the side with two holes and fix it, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity. In addition, the size of the solder pads has been significantly increased, which greatly facilitates the task and allows the use of 1206 surface mount components. But that does not eliminate the need to use a suitable strain relief.

12V Connection: One cable connected to 1, another cable connected to 2, 3 wire at the same time. At this point, the resistance value of the two lines is between 1.0 and 1.2 Ω, the real power is 144W.

24V connection: One cable connection 2, another line connected to 3 (1 not connected), the resistance value of both lines is 4.0Ω, the actual power is 24 * 24/4 = 144W. The new version of the circuit, whether connected 12V or 24V, the power will be stable at 144W.

🔌#electrocircuit_ #electronics #technology #toptags #tech #electronic #device #instatech #techie #techy #electric #electricalengineer #voltage
#wires #transistor #electronicsolvers #robot #circuitdesign #electrical #electronicsengineering.
#electronicengineering #quizzes #microcontroller #electronicprojects #tech #physics #ouedkniss #algeria #dzair #dz 07/03/2022

HOTBED + GLASS (220 x 240mm) Orange ➡️ disponible chez #slypro Blida Product Description This HeatBed Dual Power PCB with 14AWG Cable from RepRap MK2B is compatible with any 3D printer that can accept RAMPS MK2B version of heatbed. This Heatbed has a dual power capacity allowing it to be used with 12V or 24V power sources. It has a center mounting hole in the front to allow three point mounting. This is much easier for leveling the bed compared to the 4 point mounting. First level the side with two holes and fix it, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity. In addition, the size of the solder pads has been significantly increased, which greatly facilitates the task and allows the use of 1206 surface mount components. But that does not eliminate the need to use a suitable strain relief. 12V Connection: One cable connected to 1, another cable connected to 2, 3 wire at the same time. At this point, the resistance value of the two lines is between 1.0 and 1.2 Ω, the real power is 144W. 24V connection: One cable connection 2, another line connected to 3 (1 not connected), the resistance value of both lines is 4.0Ω, the actual power is 24 * 24/4 = 144W. The new version of the circuit, whether connected 12V or 24V, the power will be stable at 144W. 🔌#electrocircuit_ #electronics #technology #toptags #tech #electronic #device #instatech #techie #techy #electric #electricalengineer #voltage #wires #transistor #electronicsolvers #robot #circuitdesign #electrical #electronicsengineering. #electronicengineering #quizzes #microcontroller #electronicprojects #tech #physics #ouedkniss #algeria #dzair #dz

Vous voulez que votre entreprise soit Service Informatique Et électronique la plus cotée à Blida ?
Cliquez ici pour réclamer votre Listage Commercial.

Adresse


Blida
09000