FLEXIM

𝐇𝐚𝐥𝐟 𝐀𝐜𝐜𝐞𝐬𝐬, 𝐅𝐮𝐥𝐥 𝐒𝐞𝐫𝐯𝐢𝐜𝐞!

At an industrial park in Germany, our skilled field technicians took on a challenging task: commissioning a rental unit (G608) for industrial water measurement under less-than-ideal conditions.

The excavation pit couldn’t be fully drained due to high groundwater levels, leaving only half of the pipeline exposed for inspection. But with creativity and resourcefulness, Philipp and Alexander devised an ingenious solution.

Using borrowed bases from construction fences, they anchored the transducers securely with textile straps and pressed the portable Variofix rails against the pipe. Blocks on either side ensured optimal contact pressure, enabling precise measurements despite the tricky setup.

🎯𝐓𝐡𝐞 𝐫𝐞𝐬𝐮𝐥𝐭? 𝐀 𝐟𝐥𝐚𝐰𝐥𝐞𝐬𝐬 𝐚𝐧𝐝 𝐬𝐮𝐜𝐜𝐞𝐬𝐬𝐟𝐮𝐥 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭!

🚰💧 Cut down on water loss in your network with the innovative Flexim F532 WD!

Due to the use of its clamp-on technology, the WD Series does not require any work that affects the integrity of the pipe. This enables a very simple and cost-effective installation of flow measurement points within an existing water supply network.

View product: https://ecs.page.link/yPp1z

Let us support you in making a smarter choice!

To understand water usage in every part of a building, it’s important to see how water is distributed from the storage tank. 💧

In this example, our client first used the portable Flexim F601 to measure flow rates at different branches without modifying the pipes or interrupting operations. Once the flow profile was clear, permanent F532WD meters were installed for continuous monitoring.

A great example of how our technology helps make water management simple and efficient.

📸 Capturing innovation in action! Check out this amazing shot from Martin Herrera, our Field Service Engineer at Emerson | Flexim in Houston.

Martin snapped this photo at a tank farm in Texas, where our F705 flow meter is hard at work. It's measuring standardised volume flow with temperature compensation for heavy crude oil in a massive 36" diameter pipe!

🏢 The customer? A global player in midstream and downstream bulk liquid storage, managing an impressive 2.4 million m³ capacity across its network.

🔧 The F705 flow meter plays a crucial role in enhancing efficiency within this vital industry. Precision and reliability are key factors in the management of chemicals, oils, and refined petroleum products.

💡 Curious about how Emerson's tech is shaping the future of midstream and downstream operations? Let's chat!

Drop a comment or question below. What challenges are you facing in flow measurement? How can we help streamline your processes?

🔒 𝐇𝐢𝐠𝐡-𝐩𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 𝐟𝐥𝐨𝐰 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭, 𝐛𝐮𝐢𝐥𝐭 𝐟𝐨𝐫 𝐭𝐡𝐞 𝐡𝐞𝐚𝐫𝐭 𝐨𝐟 𝐧𝐮𝐜𝐥𝐞𝐚𝐫 𝐨𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧𝐬.

Our new 10 MGy certified non-intrusive flow meter transducers are engineered to handle the most extreme radiation environments in nuclear facilities.

From maintaining safe cooling to verifying safety injection and controlling containment spray, accurate flow data is essential for plant safety, compliance, and emergency response.

With clamp-on technology, these transducers deliver reliable, real-time measurements — all without interrupting operations.

Get in touch: https://monkeylink.co/de4beb

𝐆𝐚𝐬 𝐟𝐥𝐨𝐰 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭 of compressed ethylene at the inlet of LDPE reactors is a valuable tool to verify and monitor the performance of the process. The ability to measure volumetric or mass flow of high-pressure ethylene opens new insights for process control and mass balancing.

The high pressures required of over 𝟏𝟓𝟎𝟎 𝐛𝐚𝐫 (21750 psi) are characteristic of the polymerization processes of low-density polyethylene.

In view of the challenging process conditions, a LDPE plantoperator in Japan specifically searched for a measuring solution that does not require any intervention in the piping system. Any installation that presents a risk of leakage should be avoided if possible. In their research for non-intrusive flow measurement technology, the process engineers almost automatically came across Flexim.

Clamp-on ultrasonic technology offers a practical advantage for non-intrusive measurement. Testing its suitability before purchasing can be done without disrupting plant operations. After a successful trial measurement with the portable gas flow meter G608, the LDPE plant operator decided to install six stationary Flexim G831 ultrasonic systems on the pressure side of the hyper compressor.

The acoustic measurement technology is characterized by its extraordinary dynamics, which now make it possible to record the start-up and shut-down phases of the system. In addition to 𝐨𝐩𝐭𝐢𝐦𝐢𝐳𝐞𝐝 𝐩𝐫𝐨𝐜𝐞𝐬𝐬 𝐜𝐨𝐧𝐭𝐫𝐨𝐥, the flow measurements also offer the possibility of 𝐩𝐫𝐞𝐝𝐢𝐜𝐭𝐢𝐯𝐞 𝐦𝐚𝐢𝐧𝐭𝐞𝐧𝐚𝐧𝐜𝐞 by providing important 𝐢𝐧𝐟𝐨𝐫𝐦𝐚𝐭𝐢𝐨𝐧 𝐨𝐧 𝐜𝐨𝐦𝐩𝐫𝐞𝐬𝐬𝐨𝐫 𝐩𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞. This effectively 𝐫𝐞𝐝𝐮𝐜𝐞𝐬 𝐝𝐨𝐰𝐧𝐭𝐢𝐦𝐞𝐬.

🔍 𝐌𝐚𝐱𝐢𝐦𝐢𝐳𝐢𝐧𝐠 𝐇𝐲𝐝𝐫𝐨𝐩𝐨𝐰𝐞𝐫 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐒𝐭𝐚𝐫𝐭𝐬 𝐇𝐞𝐫𝐞!
In hydroelectric power plants, turbine efficiency is the cornerstone of productivity and sustainability. Monitoring turbine performance is essential to keep operations running smoothly and avoid costly downtime.

💡 𝐌𝐞𝐞𝐭 𝐅𝐋𝐔𝐗𝐔𝐒: 𝐓𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐅𝐥𝐨𝐰 𝐌𝐨𝐧𝐢𝐭𝐨𝐫𝐢𝐧𝐠.
Designed for seamless installation, the FLUXUS flow meter clamps directly onto the penstock—no pipework or process interruption is required. Its rugged design thrives in even the harshest environments, making it the go-to choice for retrofitting and continuous flow monitoring.

🌱 Boost your plant’s efficiency, reduce maintenance, and optimize your hydropower operations with FLUXUS.

🍺 Have you ever thought about whether your after-work beer could be as eco-friendly as it is refreshing?

Imagine this: You’ve just wrapped up a long day and reach for your favourite cold beer – maybe a crisp Pilsner, a smooth Lager, or a classic Kölsch from Cologne. But here’s something that makes it taste even better: knowing it was brewed sustainably. 🌱

Because the secret ingredient to a great beer isn’t just hops and barley – it’s sustainability. 💡

🌍 Want to know how breweries are going green?

📘 Download our free eBook for practical ways to make your brewing operations more sustainable with advanced measurement technology. It’s full of actionable tips that’ll have Mother Nature raising a glass to you. 🍻

👉 https://ecs.page.link/o1rYb

A little while ago in Camaçari, Bahia, we put our portable flow meter to the test for upstream natural gas leak detection.

Always rewarding to see it work in demanding environments—catching leaks early means protecting people and preventing small issues from becoming major incidents.

𝐖𝐡𝐚𝐭'𝐬 𝐲𝐨𝐮𝐫 𝐛𝐢𝐠𝐠𝐞𝐬𝐭 𝐜𝐡𝐚𝐥𝐥𝐞𝐧𝐠𝐞 𝐰𝐢𝐭𝐡 𝐥𝐞𝐚𝐤 𝐝𝐞𝐭𝐞𝐜𝐭𝐢𝐨𝐧? Remote site access, detection speed, false positives, or something else?