LanAgro

🇵🇱 🇵🇱

A good quality front and rear mower shouldn't have to break the bank. Especially if you are seeking a basic setup with no conditioner. TALEX has a solution for small and medium sized farms seeking a 6.0-m to 6.40-m working width. Often considered to be the ideal solution, a front paired with single side combination offers the flexibility and mowing capacity that most farms seek. For the tractors in the 150 to 180 hp (80-90 hp per mower) the Maxi Cut and Fast Cut models offer ideal solutions, for a very reasonable investment.

At the front, the Fast Cut models feature a spring suspension system that provides for optimum terrain following (+7°/-6°), combined with quality gerboxes from proven manufacturers, and cutterbar that is protected against obstacle impact by a unique overload pin system that protects the disc unit and does not damage the other units. Further protection is provided by overload clutch on the PTO shaft, and attachment to the tractor is provided by a standard A frame. At the rear, the Maxi Cut models with their 3.0-m or 3.40-m working widths feature the same protected cutterbar and overload clutch on the PTO shaft. The central suspension adapts to the terrain, and the mower is equipped against obstacle impact by a hydraulic breakback system. All this at a price that will surprise you, and quality that exceeds expectations! Contact us for more information, and for importer-dealer inquiries within Canada: (613) 294-9144 or [email protected]

🇬🇷 🇬🇷

The biggest of acreages requires the biggest of machines. The DiscoPlus XL is the largest of the Siptec disc cultivator range, with impressive working widths of 8m, 10m, and 12m. Excellent results in cultivating stubble or for preparing a seedbed after ploughing, and available with a choice of 520mm or 570mm discs. All mounted in pairs, with double-row sealed bearings, and on rubber block type suspension. A low maintenance combo that provides for impressive durability and long operational lifespan. A working depth of 3.5cm to 12cm is possible, using the precise hydraulic depth control which is a standard feature.

Attachment to the tractor is by a 51mm towing eye. The disc frame sections are carried on a heavy-duty central frame section, and a V-folded on to the transport section to a compact 3.0m transport width. The transport frame features 4x 500/50R17 tires, for optimum road stability. Side deflector plates, rebound harrow, star side discs, a pivoting towing eye, and road safety reflector panels are available as optional accessories. A choice of rear rollers including: cage roller (580mm), knife ring roller (540mm), and U-ring roller (540mm), are available to meet customer requirements. Recommended hp ranges from a minimum of 280hp with smallest 8m XL model to a maximum of 500hp on the largest 12m model. For more information on the DiscoPlus XL and the entire Siptec range, as well as for importer-dealer inquiries, please contact us at: (613)294 9144 or [email protected]

🇩🇰 🇩🇰

Grinding straw? No problem! Wanting to grind more than straw? Still, it will be no problem! The I-Grind from Grønning Smede & Maskinforretning offers nearly endless possibilities for processing material. For agriculture, for commercial, and even in recycling operations. This flex hammermill type tub grinder is highly mopbile, easy-to-fill, easy-to-maintain, and provides revenue generation possibilities for both farmers and contractors alike. Moderate horsepower requirement, impressive output, and even possible to process both dry and high-moisture grains make it a universal use machine.

The principle consists of mobile chassis, equipped with a drive system, hammer mill with changeable screens, rotating tub, discharge conveyor, and handy control terminal. The ability to process grains one day and then biomass/compost material on the next day makes the I-grind an all year-round use machine. For feedlots preparing rations and bedding, as mobile mill setup at customer locations for processing high-moisture grain corn or dry grain milling, as a contractor unit processing recyclable materials, as a compost mill at a bagging facility, the choice is ultimately yours. For more information, and for importer-dealer inquiries, please contact us for more information: (613)294 9144 or [email protected]

🇸🇪 🇸🇪

A tipping trailer for all seasons. Designed for rugged use, the tridem axle MetaQ 75 EUCON from Metsjö with it's 17m³ is right at home on the farm, in a contractor's fleet, or even on the jobsite. The awesome Swedish quality and engineering found in these trailers have made them a hallmark for depenability and durability throughout northern Europe. Quality that would be appreciated by any farmer, contractor, or construction company in Canada. As on shown in the video, equipped with 710/50R26,5 tires, forced steering on the front and rear axles, hydraulic brakes, and road speed rated up to 65 km/h with a load 10,5 tons. Axles are laser alinged during construction, ensuring precise handling and optimized tire wear.

The trailer body itself is constructed from Brinell 450 steel, with the floor having a thickness of 6mm, and the walls also featuring a thickness of 6mm. A hydraulic tailgate with a hight of 300mm forms part of the base specification. Tie down points are integrated into the outside of the walls, with lashing points integrated into the inside. The body can be swapped as needed for other other platforms, and mounting points for the support legs are also integrated into the structure. Yellow is the standard colour, with other colour options being available upon request. For importer-dealer inquiries, please contact us at: (613)294 9144 or [email protected]