Sur-Flo Meters and Controls

At Sur-Flo, we are always happy to support our clients with achieving their goals. With so many technologies available, we appreciate the opportunity to co-create a solution to ensure success on both sides of the desk. Perhaps we can be of support on your next project? We look forward to hearing all about it!

To our Facebook friends ─ have a safe and enjoyable Labour Day long weekend. Here's to taking the time to do what you love and energizes you.

At Sur-Flo, we are passionate about working together towards a solution. In this case, as our clients look towards measuring instrument air for carbon credits, we are happy to have found the right fit “measurement-wise” ─ our Thermal Mass flow meters. They can be retrofitted to match existing sites or manufactured to fit new fabrications. Reach out to our team today, we would be happy to see if we are a match to support your carbon credit goals.

Contact by email: [email protected] or by phone: 403-207-9715.
www.sur-flo.net

At Sur-Flo, we believe in making operations more efficient, and safer for our clients. When a client approached us for an alternative technology to their conventional or***ce meter runs, we were happy to present our Roto-Boss™ multi-port or***ce meter run. Given an operator can change plates in the Roto-Boss™ without opening a chamber, our client was eager to move forward after a near-miss incident at one of their sites. Fortunately, we collected this information to share with our LinkedIn network. It’s a 3 minute read (or less), perhaps you are looking for a safer alternative as well?

https://www.linkedin.com/showcase/roto-boss-multi-step-meter-run-service-hazards-case-study/

***cemeter

Roto-Boss Multi-step Meter Run Service Hazards Case Study | LinkedIn Roto-Boss Multi-step Meter Run Service Hazards Case Study | ROTO-BOSS™ MULTI-PORT OR***CE METER RUN The safest, most user-friendly meter run on the market. | 10X fewer steps to change out a Roto-Boss™ as compared to conventional meter runs.

Sometimes, our clients choose the Sur-Flo SF10V valve for its minimal (and easy) maintenance, other times because it’s able to maintain back pressure regardless of the fluid being controlled – even liquid and gas mixes! Luckily, we were able to capture this in action, in an easy to read “success story” to share with our peers 😊 if this seems like a challenge you face, reach out, we are one call/ email away!

SF10V Control Valve Low Gas Volume Case Study | LinkedIn SF10V Control Valve Low Gas Volume Case Study | APPLICATION: Gas Separators in Fairview, Alberta. | Unlike the design of conventional control valves, the sleeve and perforated cone assembly of the SF10V can maintain consistent pressure while letting process fluids from the separator pass through the...

From the Team at Sur-Flo, Happy Father’s Day! As we gear up to celebrate the Dads in our lives, we’d like to say - we appreciate you, and everything you do, seen and unseen. Have a great Father’s Day weekend 😊

At Sur-Flo, we appreciate every opportunity to support our clients. This time, one of our best clients approached us for flow meters to measure instrument air – we enthusiastically co-created a solution and are excited to deliver the first batch of Thermal Mass Flow Meters today!

Perhaps you’re looking at a similar measurement requirement? Reach out to our sales team today, chances are we might be a fit. 😊

Sur-Flo Meters & Controls Ltd.
Phone: 403-207-9715 Toll-Free: 1-877-527-8977
Web: www.sur-flo.net

The unique axial flow design of the Sur-Flo SF10V valve is engineered to maintain pressure under tough conditions. Perforations in the cone assembly allow fluids to pass through the valve without affecting performance.

It’s a design advantage that has made our client’s job easier. He’s had no maintenance issues on these valves since he installed them in 2016. “I literally installed them and walked away,” he says. “I never hear anything about them except that they work well.”

To download the case study, visit https://www.linkedin.com/showcase/-sf10v-low-gas-volume-case-study/

One of our clients was facing a challenge - selecting the right control valve on a site where there wasn’t any instrument air or process gas, while still being able to maintain a high back pressure.

Read the case study on our SF10V Control Valve via LinkedIn: https://www.linkedin.com/showcase/sf10v-control-valve-dual-stage-pressure-drop-case-study/

We keep conventional , , and repair kits in stock as we continue to find they are a great and cost effective solution in clean applications.

Reach out to one of our Sales Representatives at [email protected] today!

We are proud to be part of the Oil & Gas Industry, and as we all do our part in making our world and industry an even better place, we are happy to offer our clients – from our non-venting valve, to thermal mass flow meters that are currently being used for carbon capture credits.

We stand with our colleagues and their endeavors, perhaps we might add value to you and your initiatives?

Reach out to our sales team at [email protected], we would be happy to connect!

Thank you to all of our clients who came out to see us at the Global Petroleum Show this past June!