Precision Marine Installations by Radioworld

Precision Marine Installations by Radioworld

Share

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Precision Marine Installations by Radioworld, Boat Service, 14-850 Legion Road, Burlington, ON.

Marine Electronics Sales, Professional Installation and On-The-Water Electronics Training Services

Power-Pole & Garmin Certified Warranty Center

Burlington, ON πŸ‡¨πŸ‡¦

Photos from Precision Marine Installations by Radioworld's post 06/16/2026

🎯 Precision starts with seeing more.

This Ranger 522D is now equipped with a Garmin LiveScope Spy Pole and GT360 transducer, giving the angler the ability to scan and track fish independently of the trolling motor.

The Spy Pole allows for precise sonar targeting while maintaining boat position, and the GT360 provides a real-time 360Β° view of the underwater environment. Together, they deliver a serious advantage when locating fish and breaking down structure.

Another clean install by Precision Marine Installations.

πŸ“© Contact us to upgrade your electronics setup.

Photos from Precision Marine Installations by Radioworld's post 06/12/2026

Ranger Pro brought his 2026 Ranger 521 in for a full build! This one is ready to sn**ch some GBO’s ⬇️

βœ”οΈ Minn Kota Ultrex Quest 52” on the bow with a Humminbird Mega 360
βœ”οΈ Garmin LVS34 FFS on a GeigerTec Scope Switch
βœ”οΈ Humminbird Xplore 12 and Garmin GPSMAP 9213 XSV on the bow on the GeigerTec Ranger 2PC Fl**ge Mount with a Dual Extreme
βœ”οΈ At the console we have 2x Humminbird Xplore 12 networked through the ASETH5PGL Hub and running an in-hull transducer for 2D on pad, and a MSI+ transducer mounted on the GeigerTec Jackplate Transducer Mount
βœ”οΈ The console units are strapped to the console with a GeigerTec Ranger Dual Dash Mount
βœ”οΈ GeigerTec Graph Locks throughout
βœ”οΈ Easily accessible GLS10 Blackbox
βœ”οΈ Full Apex Lithium Battery Power Supply with 2x 142AH Dual Purpose Batteries in parallel for starting/electronics, 3x 160AH Deep Cycle Batteries in Series for the Trolling Motor
βœ”οΈ Apex Lithium 5 Bank On-Board Charger
βœ”οΈSeaClear Power Harness delivering clean, dependable power with no voltage drop and crystal clear images
βœ”οΈ Power-Pole One Pump 10’ Blades on the back

Photos from Precision Marine Installations by Radioworld's post 06/09/2026

Our 🍞 and 🧈 β€” the enhancements and cleanup that all boats can benefit from ⬇️

βœ”οΈ SeaClear Power Wiring Harness to tackle voltage issues that the customer was having β€” isolated on a dedicated electronics lithium battery
βœ”οΈ AGM Starting Battery to keep the Yamaha SHO happy and a NOCO 10X1 to keep the AGM happy
βœ”οΈ Battery compartment reconfiguration and tidy
βœ”οΈ Bow tidy and through bolting of bow plate as this customer fishes big water
βœ”οΈ Wrapped up with a console area tidy and software updates across the Humminbird and Garmin units

06/04/2026

Ranger R power supply makeover with a dedicated electronics battery, SeaClear Harness + battery backup system to power electronics off of AGM starter in a pinch πŸ‘Œ

Charging system upgrades courtesy of NOCO with a dual charger setup and single plug-in πŸ”Œ

We put the finishing touches on this one with a console and bow wiring tidy and a GeigerTec Scope Switch with some trolling motor wire management 🧼

Photos from Precision Marine Installations by Radioworld's post 06/03/2026

Ranger 518L in for a number of upgrades before the Canadian Bass Season gets rolling ⬇️

βœ”οΈ Apex Lithium 160AH Starting Battery that will do all the pumps, start the motor and run the electronics all day long
βœ”οΈ SeaClear Wiring Harness for clean power to all of the units β€” will give the customer cleaner FFS and Side Imaging and improve the performance of the units
βœ”οΈ New Humminbird Mega SI transducer and a GeigerTec Jackplate Transducer Mount β€” no more holes in the transom and easier angle adjustments for dialling in the SI images
βœ”οΈ Power-Pole 8ft One Pump Blades on the Atlas Jackplate for total boat control
βœ”οΈ GeigerTec Scope Switch for the LVS34 paired with the Flexroute Wire Management System on the trolling motor
βœ”οΈ Remounted the bow plate making sure to throughbolt for rough water security
βœ”οΈ Wrap it up with a bow and console wiring tidy and some software updates

Photos from Precision Marine Installations by Radioworld's post 05/26/2026

Bassmaster Opens angler .fishing stopped by for some essential upgrades to get the season rolling across the border, before our season gets rolling here soon ⬇️

βœ”οΈ GeigerTec Dual Dash Mount for the Vexus with a Garmin Echomap Ultra 2 126SV
βœ”οΈ GT36 Transducer on the GeigerTec Jackplate Transducer Mount and a GT15 in-hull
βœ”οΈ GeigerTec Vexus Bow Plate with the Dual Extreme to hold another Echomap Ultra 2 126SV as well as a GPSMAP 8616XSV
βœ”οΈ Garmin Force Pro Trolling Motor upgrade
βœ”οΈ GeigerTec Scope Switch and Wire Management Kit for the LVS34 FFS Transducer
βœ”οΈ Full Garmin Network setup and configuration

Photos from Precision Marine Installations by Radioworld's post 05/21/2026

We love seeing our customers come back, excited for new upgrades! This beautiful Ranger 521L came back for some sweet add-ons ⬇️

βœ”οΈ Power-Pole Move ZR 52” on the bow β€” mounted on the Universal Mounting Plate
βœ”οΈ Power-Pole One Pump Upgrade for his CM2 poles β€” one pump, less space, more efficient
βœ”οΈ New GT-8 in-hull transducer to replace the factory transducer to get better reading while on pad
βœ”οΈ New LVS34 transducer
βœ”οΈ GeigerTec Ring Plate install to allow easier access to the bow of the boat

05/20/2026
Want your business to be the top-listed Transport Service in Burlington?
Click here to claim your Sponsored Listing.

Category

Address


14-850 Legion Road
Burlington, ON
L7S1T5