Swan Racing Developments
Share
Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Swan Racing Developments, Automotive, aircraft & boat, 30-32 Wellington Park Way, Sale.
Small business owned and operated by Ben Swan specialising in motorsport preparation, composites, engines, CAD modelling and custom CNC machined parts
Instagram @swanracingdevelopments Specializing in:
• Performance engines and tuning
• Performance marine and automotive fit outs
• Motorsport composites
• 2D & 3D CAD modelling
• Custom made CNC machined components
To say it's been a big few months would be an understatement. Pumped to finally have the dyno up and running. Plenty of hurdles, and more to go, but today we got the first few pulls done🤘
Way too many people to thank on here, but you all know who you are so thanks again
12/07/2026
Got two sets of Holden 6 fire ring style head gaskets available. 0.040" thick. Made to fit the chamber shape to reduce crevice volume. These particular ones use the gasket for location so no machining required to either the block or head. Send us a PM if you want a set
Tuning job we just finished off. XU1 spec Holden 6 in a HR prem. Carbs are triple CD175 Strombergs that had 50 years of wear and tear on them. Full rebuild with new shafts, seals etc where needed. New needles and spring and a road tune. Set up the XU1 choke linkages for easy cold starting. It's running great and the fuel curve/mixture control is amazing in all gears and throttle positions. New lease of life for the old girl
02/06/2026
Jump on and give Tony and Alicia's new page a follow👇
https://www.facebook.com/share/1BfyNBZYiu/
TJA Motorsports TJA Motorsports a family run drag racing team driven by passion,dedication and a love for Motorsport
28/05/2026
Holden red cylinder head CNC surfaced and combustion chambers softened
26/05/2026
Just completed a job for a Vincent motorcycle. Bored and diamond honed the cylinders to suit the , honed big ends to suit roller bearings and aligned the rods
Update on the set up of our engine dyno. Getting excited now, another few weeks and we'll be up and running. All new load control thanks to .com and full data logging with a Nexus R5. This will let us run up to 10 NTK or Bosch o2 sensors, EGTs and as many sensors as needed including DBW set ups
11/05/2026
Our latest offering to the Holden 6 crowd.
Serpentine crank and water pump pulleys now in stock. These are to suit ATI balancer set ups. They come pre machined to suit a 36-1 trigger wheel on the back side. Also got hubs in stock with a built in v belt for guys wanting to run factory style water pump/alternator set ups with either a serpentine pulley or toothed pulley for blower drive. This particular one pictured will run a v belt for water pump and alternator, with the serpentine pulley being used to drive a blower in one of our ball bearing covers
07/04/2026
Billet ball bearing internal crank support timing covers for big block chevy in stock ready to go. Two options available as pictured. Direct blower pulley mount hub or a hub to suit an ATI harmonic balancer
Click here to claim your Sponsored Listing.
Category
Contact the business
Telephone
Address
30-32 Wellington Park Way
Sale, VIC
3850