Running Bird Racing

Exhaust is completed all welded up and mounted

Tidy little tail shaft loop for compliance done ✔️

We have been busy getting back into it. First off, replacement gearbox crossmember made to suit gearbox mount and all installed

Our type of CAD work...
Cardboard Aided Design

Working on designing the air outlet for the radiator

It has been a while, but we have been working away slowly. Here's some photos of the radiator shroud we have made up and fitted.

What do you do when your 28 year old coolent outlet corrodes... take a bit of 316 stainless and make a new one...

New injectors and injector harness sorted today.

Seat installed ✔
Pedal box cover made and installed ✔

Putting the car back together.

Inside of the cab got a paint job today. Time to start thinking of a colour for the outside 😬

We have been busy over here not getting Covid-19. After the engine start up in our last post we found metal bits in the oil filter so we re built the engine and freshened it up.
We took advantage of the empty engine bay and did some painting

See our latest post over on instagram

We have been delayed here due to the ECU failing which completely fried it. It was finally replaced under warranty after many emails and phone calls with Fernando @haltechecu It and is now is all connected up and we are setting the timing before getting ready to start it up tomorrow 🤞 #timeattack #timeattackbuild #timeattackbuilders #nissan #180sx #racecar #haltech #haltechecu #haltechelite2500 #runningbirdracing