Works Engineering South Africa

Works Engineering South Africa

Comments

Thanks for your awesome service and top products!!!! It works!!!

Performance Parts

Contact Details
Cell - 0823852967
[email protected]

25/12/2022

Merry Christmas!!!

24/12/2022

All the best for the holiday season to all of you, Merry Christmas!

24/10/2022

Happy Diwali!

22/07/2022

ATF COOLER

The key to automatic transmission life is keeping the fluid fresh, clean and cool. When fluid temperatures exceed the optimum operating range of 160°F to 200°F it begins to break down, decreasing the life of the fluid and in turn the life of the seals, bearings and all moving parts.

The #1 cause of automatic transmission failures is overheated transmission fluid. Today’s cars generate extremely high under-the-hood temperatures. Add to that the heat generated by an automatic transmission, and you’ll see why adding an auxiliary transmission oil cooler is a must for guarding against costly transmission repair.

Installation of a Works Engineering ATF Oil Cooler kit will reduce your transmission oil temperature as much as 60 degrees, which will help prevent transmission burnout and extend the life of the transmission.

The Bar & Plate cooler construction results in an inherently strong cooler core of high thermal inertia. At 30% smaller in size than conventional Tube and Fin design, Works Engineering cooler core technology occupies lesser installation space and greater heat exchange.

Each Kit comes with fittings, lines, and all hardware necessary for installation.

Please message us for more information

20/07/2022

Works Throttle Body - Q45 Universal - 85mm

✔️ increased air flow
✔️ improved throttle response & more horsepower throughout the entire rpm range
✔️ vacuum tested
✔️ size 85mm
✔️ CNC Aluminum Construction
✔️ Large bore increases air volume which gives faster response and more horsepower
✔️ TPS is not included
✔️ Gasket included

Please message us for more information

21/06/2022

WORKS ENGINEERING BLOW OFF VALVE

Blow off valve (BOV), bypass valve or dump valve is a pressure release system present in most turbocharged engines. Its purpose is to prevent compressor surge, and reduce wear on the turbocharger and engine. Blowoff valves relieve the damaging effects of compressor "surge loading" by allowing the compressed air to vent to the atmosphere, making a distinct hissing sound, or recirculate into the intake upstream of the compressor inlet.

A blow off valve is connected by a vacuum hose to the intake manifold after the throttle plate. When the throttle is closed, the relative manifold pressure drops below atmospheric pressure and the resulting pressure differential operates the blow off valve's piston. The excess pressure from the turbocharger is then vented into the atmosphere or recirculated into the intake upstream of the compressor inlet.

Please message us for more information!

02/05/2022

Selamat Hari Raya Aidilfitri!

01/05/2022

Happy Workers' Day to everyone. Have a relaxing day and enjoy it.

27/04/2022

Works Engineering ENGINE OIL CAP for Subaru

Caps are CNC-machined to be extra lightweight. Every oil cap is fully polished and features a high grade rubber o-ring for the perfect sealing and prominent acid-etched Works logo.

Please message us for more information!

17/04/2022

Cant get better then this 😎
Place your order to avoid disappoint.

Boost gauge R1550 introductory offer.

07/04/2022

Works Engineering Engine Oil Cooler Adaptor with Thermostat

- High performance racing design.

- Oil temperature and oil pressure sensor insertions equipped.

- Provides direct installation between oil cooler and oil filter without any engine block drilling or relocation.

- Protects engine by catching any large particles in oil that might cause damage potentially.

- Assists to maintain oil supply at consistent and optimal temperature.

Please message us for more information!

06/04/2022

New euro ranges of gauges
Sweep function
Warning function
Super white back light
Carbon face
52mm compared to original 60mm

31/03/2022

Here's a sneak peek of our latest product!
.
.
.
A Collection of CarbonWorks
Works Engineering PRO IV Euro Series 52mm Meter Gauge

Please message us for more information!

21/03/2022

Works Engineering Adjustable CamGear 4AGE 20V

WORKS Adjustable Cam Gears allow fine tuning of the camshaft timing to maximize engine performance and tailor power characteristics for various driving conditions. Either with OEM or WORKS Camshafts, adjustments can be made to tune an engine’s power band to the optimum RPM range for a particular application. WORKS Cam Gears are made completely of anodized Duralumin with nickel plated gear teeth except for applications with timing chains which utilize an aluminum slide with steel teeth.

WORKS engineers chose Duralumin as the core material for WORKS Cam Gears because its lightweight properties decrease drag on the engine. Precise valve timing can be adjusted and set within the range of ± 20° along a Vernier scale of 2° intervals. Each interval index is laser-etched into the Duralumin and "A" (advance) and "R" (re**rd) directional markers are also laser-etched on to the cam gear face.

Material: T-7 Aluminum Billet
Fine tune your engine power band
Improve engine performance 15% - 35%
Improve fuel consumption 10% - 25%
Lightest Cam Gear in the Market
Weight: Average 310 Gram (Each)

Please message us for more information!

18/03/2022

Works Air Control Valve Kit for ITB system

Ideal for competition use where good mid-range and low end torque will be required. It is the ULTIMATE naturally aspirated engine modification, gives highest power as well as best throttle response you can have.

A adjustable valve kit to control the supply of air during idling to multiple throttle bodies or any multiple port manifold with suitable tappings. Part of a Individual Throttle Body kit and Suitable for 4 or 6 cylinder engines.

Please message us for more information!

09/03/2022

WORKS ENGINEERING OIL COOLER KITS

As the latest generations of the engine are smaller, run at higher RPMs & produce more heat, maintaining the correct oil temperature is imperative. Additionally, most engines have a smaller oil capacity, which puts more strain on the oil and all engine components.

The installation of Works Engineering oil cooler kits is an excellent addition and is particularly effective in driving harsh conditions.

With its inner-fin core design, it can improve oil capacity, reduce oil temperatures, and increase engine life. The efficient cooler cores and braided lines ensure good flow and a leak free installation.

Included in the kit is a mounting plate which is also a convenient place for oil pressure and oil temperature sensors installation.

Please message us for more information!

28/02/2022

Works Drop In Filter for Volkswagen Golf MK7/7.5 GTI 2.0

size : 417 mm x 188 mm

- Material: Nonwoven Fabric
- Higher air intake and more dust absorbing than original paper air filter.
- Increases Horse and Response Power: 5% - 20%
- Fuel Saving: 5% - 15%
- Extends engine life span
- Unique EPDM frame
- 1-piece extrusion molded
- Light weight and strong
- Washable Air Filter
- Durable .
- Highly Recommended for Street and Racing

Please message us for more information!

23/02/2022

Works Throttle Body - Honda B16-20, B18C,H22 and D series - 70mm

✔️ increased air flow
✔️ improved throttle response & more horsepower throughout the entire rpm range
✔️ vacuum tested
✔️ size 70mm
✔️ CNC Aluminum Construction
✔️ Large bore increases air volume which gives faster response and more horsepower
✔️ Works with standard Intake Manifold
✔️ TPS is not included
✔️ Gasket included

Please message us for more information!

17/02/2022

Works Fuel Regulator Stage 1

Our Universal Adjustable Fuel Pressure Regulator can be remotely mounted on ANY application that utilized a return hose. This unit is capable of supporting enough fuel flow for engines in excess of 1000 horsepower, and is ideal for forced-induction engines since it is boost dependent (1:1 ratio).

• CNC-machined from 6061-T6 billet aluminum
• Interchangeable discharge ports match regulator output to output of any fuel pump
• Adjustable from 20 psi to maximum fuel pump capacity
• Maintains stable fuel pressure at high-horsepower levels
• Sensitive adjustment allows setting of optimum fuel pressure
• Service hole in regulator perfect for pressure gauge installation or as a feed for nitrous system or additional injector setup
• Mounting bracket included

Please message us for more information!

10/02/2022

Works 360° Mini Engine Breather Air Filter - W:50mm H:35mm N:9mm

It can relieves your engine of positive crankcase pressure and recycled carbon vapors from your engine,which cause loss of throttle response due to build-up on the throttle body.

By venting the vapours into atmosphere,the Mini Air Filter help to resolve the problem.

Please message us for more information!

08/02/2022

Works Engineering WHEEL NUT STEEL

Works Engineering steel wheel nuts are for racers who need extreme tensile strength to withstand the shock loads and lateral forces in racing applications. The wheel nuts are specially heat-treated, hardened and tempered to boast a 190,000 psi tensile strength, able to withstand repeating high torque impact opening and tightening by impact wrench.

Comes in open end M12 x 1.25mm and M12 x 1.5mm thread to fit all cars.

Please message us for more information!

31/01/2022

Happy Chinese New Year!

Photos from Works Engineering South Africa's post 24/01/2022

Works Engineering Adjustable Cam Gear SR20DET

Please message us for more information!

Photos from Works Engineering South Africa's post 21/01/2022

WORKS ENGINEERING OIL COOLER KITS

As the latest generations of the engine are smaller, run at higher RPMs & produce more heat, maintaining the correct oil temperature is imperative. Additionally, most engines have a smaller oil capacity, which puts more strain on the oil and all engine components.

The installation of Works Engineering oil cooler kits is an excellent addition and is particularly effective in driving harsh conditions.

With its inner-fin core design, it can improve oil capacity, reduce oil temperatures, and increase engine life. The efficient cooler cores and braided lines ensure good flow and a leak free installation

. Included in the kit is a mounting plate which is also a convenient place for oil pressure and oil temperature sensors installation.

Please message us for more information!

17/01/2022

WORKS ENGINEERING Harden B-Series SR-4 Lightweight Crankshaft Pulley is different with others Aluminum crank pulley. It is using T7 Aluminum and over-coating a harden layer.

This harden effect will protect the pulley and become wear-resisting.The latest technology that we can let the harden effect to become colored. NEW Diamond coat will last longer than Golden Harden more then 50% - 70%.

Feature:

- BHP & Torque gains across entire RPM range
- Forged
- CAD designed & CNC
- Balanced and heated treated to T7
- reduction in weight reduces the moment of inertia allowing your engine to respond faster to throttle inputs and perform better at all RPMs.
- Material: T7 Aluminum Billet
- Increase Horse Power
- Fuel Saving
- Weight Compare to Original Crank Pulley: 60% - 90% Lighter
- Performance and Reliability Guarantee

Please message us for more information!

15/01/2022

Works Engineering Air Filter - Toyota Hilux Revo (GD6) 2.4/2.8

- Material: Nonwoven Fabric
- Higher air intake and more dust absorbing than original paper air filter.
- Increases Horse and Response Power: 5% - 20%
- Fuel Saving: 5% - 15%
- Extends engine life span
- Unique EPDM frame
- 1-piece extrusion molded
- Light weight and strong
- Washable Air Filter
- Durable .
- Highly Recommended for Street and Racing

Diameter of filter : 321mm X 238mm ( Length X Width)

Please message us for more information!

12/01/2022

Works Engineering Throttle Body for Subaru Imprezza STI (Ver 7 and 8 )

✔️ increased air flow
✔️ improved throttle response & more horsepower throughout the entire rpm range
✔️ vacuum tested
✔️ size 70mm
✔️ CNC Aluminum Construction
✔️ Large bore increases air volume which gives faster response and more horsepower
✔️ Works with standard Intake Manifold
✔️ TPS is not included
✔️ Gasket included

Please message us for more information!

07/01/2022

Works Engineering Adjustable Cam Gear - Honda B Series DOHC

- BHP & torque gains across entire RPM range
- Adjustable in 1 degree increments to a maximum of +/- 10º .
- Timing marks accurate to within 1 minute of a degree (60 minutes in a degree) .
- Easy to read marks, CNC engraved not painted or etched .
- 5-bolt pattern for a lifetime of worry-free adjustment .
- Tooth profile identical to OEM spec and hard anodized .
- CAD designed & CNC'd from 6061 Aluminum Billet .
- Grade-8, six-point hex bolts stand up to repeated adjustments and feature integral washer fl**ge for greater load distribution

Please message us for more information!

03/01/2022

Works Engineering bleed type boost controller allows increasing boost approximately 12 psi over your Waste gate boost setting. An effective and simple way to control boost level and generate more power from your engine. Mechanical boost controller is a manual boost control system that utilizes a pneumatic regulating valve to manipulate boost pressure levels.

Please message us for more information!

31/12/2021

Happy new year, and we look forward to developing high-quality products to ensure a great driving experience in 2022.

24/12/2021

Merry X'mas!

21/12/2021

BETTER PROTECTION !

WORKS ENGINEERING TURBO OIL LINE FILTER

- Design to filter out and prevent oil debris from flowing into your turbocharger and causing unnecessary damage.
- Fits in between oil feed line between engine and turbocharger.
- Suitable for all turbocharged.

Please message us for more information!

20/12/2021

We available on whatsapp for any enquiries, sales and info...

Photos from Works Engineering South Africa's post 17/12/2021

Works Engineering Magnetic Oil Sump Nut

- High quality magnetic oil sump nut to catches any metal particles in your engine oil
- Keeping your engine completely free of metal bits and shavings.

Available in size :
- M12 x P1.25 Fits most - Toyota / Nissan / Perodua / Daihatsu
- M14 x P1.5 Fits most - Honda, Mazda, Proton, Mitsubishi, Suzuki Swift
- M17 x P1.5 Fits Subaru

Please message us for more information!

Photos from Works Engineering South Africa's post 13/12/2021

Works Engineering Cam Gear - Mitsubishi 4G63 CamGear Evo 1-8

WORKS Adjustable Cam Gears allow fine tuning of the camshaft timing to maximize engine performance and tailor power characteristics for various driving conditions. Either with OEM or WORKS Camshafts, adjustments can be made to tune an engine’s power band to the optimum RPM range for a particular application.

WORKS Cam Gears are made completely of anodized Duralumin with nickel plated gear teeth except for applications with timing chains which utilize an aluminum slide with steel teeth.WORKS engineers chose Duralumin as the core material for WORKS Cam Gears because its lightweight properties decrease drag on the engine.

Precise valve timing can be adjusted and set within the range of ± 20° along a Vernier scale of 2° intervals. Each interval index is laser-etched into the Duralumin and "A" (advance) and "R" (re**rd) directional markers are also laser-etched on to the cam gear face.

- Material: T-7 Aluminum Billet
- Fine tune your engine power band
- Improve engine performance 15% - 35%
- Improve fuel consumption 10% - 25%
- Lightest Cam Gear in the Market
- Weight: Average 640 Gram (Each)

Please message us for more information!

10/12/2021

Works Engineering Honda B-series VTEC Cam Seal Cap

Works Engineering Cam Seal features 3 O-rings for a superior fit & seal.

Factory plastic seal don't have O-ring and are prone to leaks.

07/12/2021

Works Engineering Lightweighted Crank Pulley for
Mitsubishi 4B10/11/12 series Engine.
(Mitsubishi Outlander/ Lancer/ ASX

Weight reduction is how we are able to increase horsepower. Each pound of weight removed from the crankshaft is worth approximately 2.7HP, and our stock diameter crank pulleys are at least 60% lighter than the OEM pulleys they replace, our undersize crank pulley could be up to 90% lighter than the OEM pulleys. This weight loss provides even more spectacular gains than force induction, nitrous, VTEC and increased RPM’s.

With our undersize crank pulley, we still fully maintain all accessory output minimums like air conditioning efficiency, power steering feel, and voltage even at idle with everything electrical on in the car. There are no adverse effects from using any of our pulley versions. Bolt them on and forget about them, then just follow your vehicles normal maintenance schedule. Works Engineering crank pulleys are precisioned CNC with the highest grade light weight forged aluminium. Our Pro Balancing series are black oxide coated and hardened for even more strength, you will never have to worry about unbalance or breakage due to material fatigue.

Please message us for more information!

Videos (show all)

Address


Centurion
Centurion
0037

Other Engineering Services in Centurion (show all)
Master Machining Master Machining
107 Vicki Avenue
Centurion, 0157

Master Machining CC was established in 1984 as a prototype and limited CNC production facility for high precision components. We also specialized in CNC manufacturing of complicate...

Turnweld Engineering Turnweld Engineering
Skopsuil Close
Centurion, 0157

Supply, Manufacturing and fabrication Assembly Of Steel Structures Cutting, bending, Plasma cuttin

KiT Formwork KiT Formwork
52 Jakaranda Street, Hennopspark
Centurion, 0157

Special formwork by KiT Formwork & Scaffolding is the unique solution to your project challenges. W

Hermtek Solutions Pty Ltd Hermtek Solutions Pty Ltd
4791 Fleabane Crescent
Centurion, 0157

HERMTEK Pty Ltd is a process-focused engineering firm, providing engineering expertise to projects

Gap Infrastructure Corporation-GIC Gap Infrastructure Corporation-GIC
35 Tegel Avenue, Highveld
Centurion, 0157

We are a growing family of professionals, focused on finding better ways to build brighter futures.

VNWS Engineering VNWS Engineering
10871 Thatch Hill Estate
Centurion, 0187

VNWS Engineers is a 100% black owned consulting company. We are committed to providing high quality

Coemechweld Coemechweld
4 Grenada South Street, Silverstone Estate, Monavoni Ext 06
Centurion, 0149

Project Engineering Consultants (Pty) Ltd.

Boja Technical Solutions Boja Technical Solutions
Centurion, 0157

Boja Technical Solutions is an engineering solutions company that supplies Welding consumables,PPE,

Prontocad Solutions Prontocad Solutions
Centurion, 0034

ProntoCAD Solutions is a one stop shop. Taking any idea from mind to matter, no matter what.

DUP SOLUTIONS DUP SOLUTIONS
Centurion, 0157

Solution Services and Custom Designs - Power l Electrical l Lighting l Security

Fumex Engineering Fumex Engineering
134 Koedoe Road, Laezonia AH
Centurion, 0026

Fumex Engineering is a multi-disciplinary company founded specifically to address the diverse needs

SolProv Engineering Pty Ltd SolProv Engineering Pty Ltd
Centurion, 0157

SOLPROV ENGINEERING IS A SOLUTIONS PROVIDER COMPANY IN THE MINING, INDUSTRIAL, CONSTRUCTION, AGRICULTURAL AND AVIATION INDUSTRIES.