Plastic Extrusion Machinery Inc.

Plastic Extrusion Machinery Inc.

Comments

# পেট বোতল লেভেল রিমুভার মেশিন
# পেট বোতল হাইড্রোলিক প্রেস মেশিন

বতমানে অনেকেই এখন ব্যবসা হিসেবে পেট বোতল লেভেল রিমুভ করে ,হাইড্রোলিক প্রেস মেশিন দিয়ে চ্যাপ্টা করে নিদিষ্ট পরিমান বান্ডিল করে বিক্রি করছে । আপনি ও শুরু করতে পারেন এই ব্যবসা, যার মেশিন গুলো পাবেন সিগমাটেক পাঠশালায় ।

ক্ষুদ্র ও মাঝারি শিল্প উদ্যোক্তাদের জন্য বিশেষ পরামর্শ ও সব ধরনের মেশিন পাওয়া যায়। নিজেকে উদ্যোক্তা হিসেবে গড়ে তুলুন। কর্মক্ষেত্র তৈরি করুন এবং বেকারত্ব দূর করুন।
আগ্রহীরা যোগাযোগ করুন: ০১৮৭৭৭৩৪২৩১
০১৮৭৭৭৩৪২৫৩
যোগাযোগের ঠিকানাঃ ইকোনমিক জোন,যমুনা ব্রিজ সংলগ্ন, সয়দাবাদ,সিরাজগঞ্জ
Hi, we make PVC Hose and PVC Hose machines. Whatsapp or WeChat: +8615953660191

Buy and Sell Used Plastic Machinery We buy and sell good quality used machinery for the plastics industry. We speicalize in recycling equipment, such as Pelletizing Lines, shredders, Granulators, Wash Systems and more.

We also sell extrusion equipment for all products; Extrusion Pipe and Profile Lines, Extrusion Film and sheet Lnes, Compounding lines; Single and Twin Screw Extrusion Lines.

06/11/2022

I’m ok but had a little mishap on my bike ride with Mary…fell on my side little bloody elbow but I have to tell you I am truly blessed to be living in this community…everyone including this sweetheart Suzanne were playing pickle ball and all came running so Kim And Steve Mike and Ralph and everyone ….love you all thank you for coming to my rescue and we have been on a emergency road trip with Suzanne and Ralph and Mary taking me to urgent care and then for the sling and then to Walgreens for meds ❤️❤️❤️❤️my heart is full …nothing broke bruised but happy to have such good friends

08/06/2019

August 6, 2019
For Sale:

34 mm Leistritz Strand Pelletizing Line (used in LAB)

Photos from Plastic Extrusion Machinery Inc.'s post 08/01/2019

August 1, 2019
FOR SALE:

Vecoplan RG52/100 Single Shaft Shredder – Refurbished – in plant

Model RG52/100 – 52″ Opening – 100 HP Motor – the shredder has been completely redone. It has a new hydraulic unit from Vecoplan – New torque converter – New PLC – New Motor Starters – New Hydraulic Pump – New Contactors & New Alligator Bed Knives.

Option: Can buy separately or with shredder – Vecoplan In Feed Conveyor with New Cleated Belt!

Spare Second Conveyor…. Sorting Line Available
(516) 766 3222 [email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 08/01/2019

August 1 2019
For Sale:

75 Dolci Blown Film Line

75 mm Dolci 1992 Single Screw Extruder approx length 2.8m (32/1) Refurbished in 2014
The equipment was used here for the following:
· Material blend – LD 54.5%, LLD 28%, Master Batch (LD colorant) 7.5% and Calcarb (filler) 10%.
· Width – material is printed in a ‘tube’ non-edge trimmed state after passing through the Corona Treater.
Maximum printed width is 1350mm
Target non-trimmed width is 1420mm
Actual Corona treater width target approx. 1450mm – to allow for alignment and width fluctuation
Segmented operation with minimum Dyne level 40
· Line speed
Product thickness is nominally 50 to 100 µm with very occasional 500 µm (0.5mm)
Throughput range between 90 and 180 kg/hr
Line speed minimum 3m/min
Line speed maximum 55m/min (note the maximum run normally is nearer 25m/min when printing)

The unit comprises of:
A masterbatch feed system
the Dolci Extruder that you supplied c/w 112kw DC motor along with
Blown film mandrel Moda Meccanica TXCO/300
The new Martignoni corona treater – max treated width 1400mm
I think the printing station is now fully obsolete
Moda Meccanica winder station two sided - 300 mm Die
Munchy edge trim recycle

Photos from Plastic Extrusion Machinery Inc.'s post 08/01/2019

AUGUST - 2019 - FOR SALE:
Prealpina 130 mm Pelletizing line
Weima Model WLK 13 shredder – 90 HP, 51″ x 66″ opening, Hopper 2.3 yards, Rotor diameter 14.5″ with 3 sets of blades, 1.5″ screen, 69 cutters, 90 RPM, 460/3/60 cycle Soft Start with Star Delta starter, Anti vibration pad, Reverse counter, Fast hydraulic, with rear flared hopper, conveyor, Fluff surge hopper, crammer feeder, 130 mm Prealpina 30:1 L/D vented extruder, with updated vacuum,300 HP AC drive, temperature control panel Prealpina slide plate screen changer, Prealpina water ring pelletizer, spin dryer, classifier and air veying system, running LLDPE film scrap (516) 766 3222

Photos from Plastic Extrusion Machinery Inc.'s post 07/31/2019

· 4 1/2 " Cincinnati Milacron Apex Series extruder and spare screw

· 30:1 L/D

· Water cooled barrel-6 zones

· Vent barrel – with vacuum pump assembly

· 42” centerline with 10” base riser

· 10 die zones 230/3/60

· Operators panel

· 250 HP Saftronics drive (dcM series) with electrical panel, primary power 460/3/60

· Service rating 250 HP/ 450 HP catalog rating, 1750 RPM input/ 152 RPM output

· Equipped with a Flender Gearbox SDN320

· Total FLA 535

· Spare two stage extrusion screw with a Maddox tip

· Extruder was running prior to shut down. There is a dent in the shroud that can be repaired

· Previous service polypropylene: 900-1000 LBS. HR

· Attached are original electrical prints

· Gneuss Model SF 150 Continuous Screen Changer

· Removable Pod inserts

· Mode of operation:
When a pressure increase upstream of the filter due to contamination is registered, the filter disk is indexed by means of a hydraulic drive. This guarantees that the free screen area is always kept constant and that the pressure variation in front of the filter is < 1.5 bar

· Vertical Strand Transition/Die

· Vertical 90 degree transition

· Three (3) 80 hole die plates

· Strand water bath with support legs

· (2) IMCS day bin hoppers

· Seller would consider splitting off the extruder from the screen changer-please inquire

· Equipment was running and barrel purged clean by a global manufacture prior to shut down and is presently stored in a warehouse, so equipment doesn't show well in the pictures

Photos from Plastic Extrusion Machinery Inc.'s post 07/30/2019

34 MM LEISTRITZ COUNTER ROTATING TWIN SCREW EXTRUDER (LAB)
34 mm Litstitz Counter Rotating LSM 30/34 LAB Extruder

24:1 – 15 HP DC – approx. 30-40 lbs./hr. – 240 v – Extra Elements – Refurbished LAB extruder in 1983

ITEM #: 7798

07/26/2019

July 26, 2019 - For Sale - Complete 4.5" Sterling Strand Pelletizing Line - WWW.pemsinc.com (516) 766 3222 call or email us at [email protected] for all details

Photos from Plastic Extrusion Machinery Inc.'s post 07/20/2019

Theysohn TTM118 - 118 mm Counter Rotating Twin Screw Extruder - New 2000 - 118 mm - 117 KW AC Motor - Eisenbeiss Gear Box - Tungsten Barrel & Screw - 2000 lbs./hour of Rigid PVC - Excellent Condition!

Photos from Plastic Extrusion Machinery Inc.'s post 07/20/2019

July 2019 - For Sale:

Theysohn Model TTM138 - 138 mm Twin Screw Counter Rotating Extruder - New 2000 - 165 KW AC Motor - Eisenbeiss Gear Box - Tungsten Barrel & Screws - 2500 lbs./hour of Rigid PVC - Excellent Condition

Photos from Plastic Extrusion Machinery Inc.'s post 02/27/2019

February 2019 - FOR SALE: EQUIPMENT AT PLANT: EXTRUSION SHEET FOAM LINES, RECYCLING LINES - THERMOROMING LINES, PRINTERS, PACKAGING EQUIPMENT, BLOWN FILM LINES, ALL AT THE SAME PLANT - GO TO WWW.pemsinc.com for all photos and specs - or scroll down to see equipment listed with pics. Call (516) 766 3222 or email us at [email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

FOR SALE:

DESCRIPTION
Holin Twin Extruder Recycling Line (Foam Scrap) 150 mm & 120 mm – 2013

Holin Twin Extruder Recycling Line Consisting of:

2 Extruders: 150 mm & 120 mm for recycling foam scrap

104 HP each or 77 Kw each

Crammer Feeder

2 Slide Plate Screen Changers – 8″ & 10″ with Power Packs

8″ 25 Hole Strand Die 8 foot water bath with water re-circulation pump

Air Knife

32 Knife Helical Rotor

WWW.pemsinc.com
(516) 766 3222 [email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

Chi Chang Machinery Foam Sheet Extrusion Line – New 2017

Line Consists of Two Extruders: 130 mm and 160 mm Water Cooled

Fasi Gravimetric Blending System – New 2017 – Model FGB-2 – 4 Component Blending System with 2 Loading Receivers and 2 Self Contained Loaders

HiTech Automatic Screen Changer – New 2017 – Model Eo7RXL – Continuous Screen Type – Complete with Closed Loop “Cycle Time” Control.

Features of the Closed Loop – Time algorithm:

Operational modes: OFF/AUTO/TEST/MELT – Password protected – Screen advancement based on constant increments according to a Tine Based Logic Cycle. The Closed Loop-Time algorithm is used to maintain a steady incremental rate of screen travel. The rate of screen movement are operator selectable and adjustable. Screen movement is verified by the controls. Immediate indication of any malfunction in screen movement is given by means of the NO FEED alarm. The automatic cycling is stopped, and the operational mode is turned off. Variety of heating patterns for the heater (s) can be selected to customize the controls for a variety of polymer and processing conditions. All the heating zones are monitored by temperature controllers. Power consumption indicators are also included. Door handle is interlocked with a disconnect switch inside the enclosure.

Alarms (visual and audible) supplied for:

NO FEED: screen movement cycle is not completed. NO COOL: accidental loss of cooling water to the line. NO HEAT: alarm stops operation of the controls and returns to OFF mode. prevents tracking issues by not allowing the screen to advance without adequate heating conditions.

Protection supplied for:

TEST: mode has max time protection. BOOSTER and EXILT LIP heater (s) have separate protection limits against overheating in all modes. Incorrect settings of the timers. MELT mode has an additional protection against overheating of BOOSTER and EXIT LIP that allows the cooling system to expedite the drop of temperature (mainly for low flash point polymers). Incorrect mode selection when properly interlocked with the extruder.

Air Cooling Ring and Forming Mandrels

Gas and C02 Metering Equipment & Pumps – Hammelmann Hi Pressure Gas Pump – Normal Operating Pressure – 2,200 lbs. – 480 volts 3 phase – 60 Hz. Hammelmann Hi C02 Pump – 480 VOLTS 3 Ph 60 Hz.

Chi Chang Take-off System

Chi Chang 2 Station Winding Unit.

AC 480 Volts 3 Phase – 60 Hz. – Total Capacity 950 lbs/hour )( 430 Kg/hr.) – 160,000 lbs. per week. 638,400 Lbs./Month

WWW.pemsinc.com (516) 766-3222
[email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

FOR SALE:

DESCRIPTION
Chi Chang Machinery Laminating Line – Model CC-LAM-90 – New 2005

Extruder – 90 mm – Air Cooled – 75 HP Motor – Control Panel with 4 Barrel Zones Heat/Cool with AMP Meters, 6 Die
Zones Heat only with AMP Meters, 4 Adaptor Zones Heat only with AMP Meters

Slide Plate Type Chi Chang Screen Changer with Power Pak.

54″ Die with 45″ Adaptor Die is equipped with Flex Lip and single point adjustment.

54″ Roll Laminating Down Stream and integrated controls and pull roll station

Chic Chang 2 Position Winder

WWW.pemsinc.com (516) 766-3222
[email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

FOR SALE:

DESCRIPTION
Lung Meng Side Seal Bag Machine Model LB-ASTP-1000c – 2013

Designed for side seal bottom seal and double seal bags, which takes less than 1/2 hour for the change over.

Servo driven control system high speed production output at 200 bags/min.

Abnormal indicator to protect the machine and easy troubleshooting

Advanced microprocessor motion control for quick length change and photos registration.

WWW.pemsinc.com (516) 766-3222
[email protected]

02/23/2019

FOR SALE:

Irwin Thermoformer Model 50NT New 2013 “Never Used”

Zero Hours !!!!

Material Index:

Maximum Chain Speed: 200″/Sec (5080 mm)

Sheet Width: Max 52.5″ (1334 mm) Min 30″ (762 mm)

Heat Tunnel:

Length: 200″ (508 mm)

Heating Element: Optional Quartz

Temperature Control: B & R Automation

+2 at 600 deg. F =1 at 316 deg. C

Former:

Maximum 52″ Wide (1321 mm)

Minimum 30″ (762 mm)

50″ wide (1270 mm) 50″ long (1270 mm)

Standard 2.50″ (64 mm)

Optional: 3.5″ (83 mm)

60 Toms

Standard 10″ (254 mm)

Optional: Upt o 14″ (356 mm)

3.78″ (96 mm) Standard

WWW.PEMSINC.COM (516) 766-3222 [email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

FOR SALE:

DESCRIPTION
Advantage Semi Automatic packaging L-Bar Sealing Machine – # L-728 & T201 New 2017

Product Size (4-20) x (2.5-160) x (0.2-4.72)

Sealing Blade 22.24 x 18.11

Max Speed Pieces Per Min. 30

Max. Film Width: 23

Conveyor Speed 0-85

Power Voltage 220/1/60

Air Pressure psi/cfm 60/2.5

Machine Dimensions 71″ x 39″ x 62″

WWW.pemsinc.com (516) 766-3222
[email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

FOR SALE:

DESCRIPTION
Chang Mei Thermoforming Model # CME-1000

220 volt, 50 co Hz

42′ Material Width (1,066 mm)

Capable of producing: 12 cycles per minute or 96 to 240 parts per minute – depending on product size

Production Capacity (5,760 to 14,400 parts per hour)

150 to 200 lbs./hour depending on product volume

WWW.pemsinc.com (516) 766-3222
[email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

FOR SALE:

LUNG MENG PRE STRETCH UNWIND/REWIND MACHINE – 2008
Lung Meng Pre Stretch Film Unwind/Rewind – 2008

Model LM-PS-650C

Voltage 220

02/23/2019

FOR SALE:

MACDUE SEMI-AUTOMATIC PACKAGING MEDISAC 70SA
MacDue Semi-Automatic Packaging Medisac 70SA

Used for Wrapping of EPS plates, Trays and Containers – capable of packaging 10 packages per minute each 480 v
WWW.pemsinc.com (516) 766-3222
[email protected]

02/23/2019

FOR SALE:
MACDUE SEMI-AUTOMATIC PACKAGING MINISAC 50
MacDue Semi-Automatic Packaging 50

Model 50 – 480v 60 Hz 0 Capable of packaging 10 packages per minute each
WWW.pemsinc.com 516 766 3222 [email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

FOR SALE:

DESCRIPTION
Lung Meng LM AH 65SC Blown Film Line – 2005

65 mm Air Cooled Extruder

With Zambello 2 Gear Box & 75 HP DC Motor

2 HP Crammer Feeder

With Die and Rotating Air Ring

Tower that is built in segments for ease of removal and setup. Also with stairs & mezzanines.

Treater Station

50″ Nip Rollers

Wood Collapsing Tower

Surface Winders
WWW.pemsinc.com (516) 766 3222
[email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

Brown Model T-345V Trim Press 1995

18″ x 50″ Forming Area

4″ Stroke – Platen configuration same as T-350V – 6 stroke at 15″ tool height – 4″ stroke at 16″ tool height – 12″ ejector stroke – 24.5″ max tool clearance – 54″ wide
(516) 766-3222 WWW.pemsinc.com [email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

JANDIS TECH PLUS GFE4100 FOUR COLOR PRINTER – 2013
Jandis Tech Plus GFE4100 Four Color Printer – 2013
(516) 766-3322
WWW.pemsinc.com [email protected]

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

JANDIS MODEL GF-A1024E SVP BAG MACHINE 2013
Jandis Model GF-A1024E SVP Bag Machine 2013

240v 3 ph 60 Hz – Capacity producton 3600 bags per hour depending on size.
(516) 766-3222 WWW.pemsinc.com

02/23/2019

AVAILABLE:
Netstal 600 Ton Injection Molder (High Speed)
Model: Synergy S-6000-3700E
Year: 2005
Min shut height: 33.465”
Max shut height: 53.150”
Clamp stroke: 37.402”
Distance between tie bars:
Max daylight: 90.551”
Pot diameter: 80 mm
Length” 98.16 cubic inches
Grams: 1,454.42
Controls: Netstal, screenshot
Has core pull
Inj. accumulators
Robot Interface
Currently running with IML robots.
Set up to run valve gated or hot tip runners.
Can run hydraulic ejectors on either/both platens
Under Power
Very Good Condition
(516) 766-3222
[email protected]
WWW.pemsinc.com

Photos from Plastic Extrusion Machinery Inc.'s post 02/23/2019

AVAILABLE:
(2) Netstal 800 Ton Injection Molders ( SyNergy ) with duel injection units
Model: S-800-2700E/1700 2C (High Speed)
New: 2008
This Netstal is set up with dual injection today, but the secondary injection unit can be removed
Min Shut Height: 45.276 inches

Max Shut Height: 64.961 inches

Clamp Stroke: 39.370 inches

Max Daylight: 104.331 inches

Tie bar spacing: 1220 mm x 1220 mm

Mold height: Min and max = Toggle Clamp, Min Shut Height 1150mm, Max Shut Height 1650mm, Clamp Stroke 1000mm, Max Daylight 2650mm

Platen size: 1780 mm wide x 1870 mm high

Injection unit # 1:

Pot Diameter: 70 mm

Length: 280 mm

Cubic inches: 65.76

Grams (Polypro): 974.35

Injection Unit # 2:

Pot Diameter: 70 mm

Length: 280 mm

Cubic inches: 65.76

Grams (Polypro) 974.35

Has robot interface

With accumulators for high speeds

Under Power (516) 766-3222
[email protected]
WWW.pemsinc.com

Photos from Plastic Extrusion Machinery Inc.'s post 12/27/2018

Cumberland Model 50 B 3 Blade Open Rotor Grinder

One (1) Used Cumberland 50B Granulator – 3 Blade – 150 HP motor – under power in plant !!!

The blades are steep angled. (.750″) This is not a high shear….this has 6 rotor blades – 3 on each side and 4 bed knives – 2 on each side.
Open Rotor
20″ x 50″ Opening
150 HP motor
5/8″ Screen
Extra Screen – either 1/2″ or 3/8″ (will confirm)
Extra Set of Blades (used)
Control Panel
Blower and Cyclone with Rotary Air Lock and 6 Bag Dust Collector
Comes with Mezzanine
Comes with 20 foot long in feed conveyor.

Nice Shape! Under Power In Plant – Note – VIDEO IS AVAILABLE ON OUR COMPANY FACEBOOK PAGE

Photos from Plastic Extrusion Machinery Inc.'s post 12/26/2018

6" PTI Pelletizing Line - Consisting of the following:

1- 1998 PTI 6000 6 “ Air cooled Extruder, 500 HP AC Motor, 30:1 L/D, 13:9:1 Gear box ratio, Vented, temperature control panel ( new screw, Barrel, Gear box and motor in 2010)

2- 2011 PRT Flash 300 12” 10 hp Screen Changer with Hydraulics Inc. KP9038PHP Power pack

3- 2011 PRT WF-1100 Doe Face Pelletizer W/Spin Dryer & water system

4- 2011 PET USB1400 18”x48” S/S Deck Screener

5- Dri-air 1500 1 Hot Air Dryer-Hopper with 5 hp Blower

6- 5 assorted skids of Hopper-loaders, hoppers , etc.

Contact J Jodice at (516) 766 3222 - [email protected] - WWW.pemsinc.com

Photos from Plastic Extrusion Machinery Inc.'s post 12/26/2018

SSI 3600ED Dual Shaft Shredder - Rebuilt 2010
575 Volt

SSI 3600 ED Dual Shaft Shredder - New 1986 - Fully Rebuilt 2010
Two 75 HP motors
Complete with Control Panel
Extras

Photos from Plastic Extrusion Machinery Inc.'s post 12/26/2018

Vecoplan RG62/125 SPK Single Shaft Shredder - New 2002 - 575 volt 62" Opening with 125 HP motor - Complete with control panel. Contact us at (516) 766-3222 - [email protected] WWW.pemsinc.com

Home 10/21/2018

Home

WWW.pemsinc.com - for all your machinery needs !!!

Home

10/10/2018

Hempstead Model H300-54-50-E - Dual Shaft Shredder - 1998

With Two (2) 25 HP motors - 54" opening - Crusher Plate - was doing HDPE AND HMPE - Complete with control panel, comes with Hydraulic Box Dumper, In Feed Converyor, Discharge Conveyor and incline.
Can be inspected under power in plant.

Home 09/26/2018

Home

Please go to WWW.pemsinc.com for all your machinery needs.....if you have equipment that is surplus, please email us at [email protected] or call us at (516) 766 3222....Turn your Surplus Machinery into CA$H !!!

Home

05/02/2018

130mm OMP/Prealapina Complete Pelletizing Line - including Nelmor Granulator and 40 Ton Trane Chiller - For all specs and Photos - Go to our Web Site: WWW.pemsinc.com (516) 766 3222

Videos (show all)

Telephone

Address


Rockville Centre, NY
11570

Other Commercial & Industrial Equipment in Rockville Centre (show all)
The Parts Authority The Parts Authority
495 Merrick Road
Rockville Centre, 11570