Audio Solutions

Aftermarket Automotive and Marine audio products and installation. Offering mobile services to your

01/03/2022

Last project if 2021 and the first of 2022 are one in the same. This underseat enclosure for a 2021 Denali 2500 fits great and houses 3 Kicker L7T 10” subwoofers. All acrylic work done by hand, I do not own a CNC or laser.

11/17/2021

This build was a combination of multiple brands including a set of customer supplied JL Audio 12W6s,
Two @audison_official SR 5.600s (one left and one right amp), a set of @hybridaudio Unity U6 in the lower door, U1 in the sail panel and a U2 in the dash. All driven by a @zapco_official DSP Z8 IV. The end result was an amazing sounding car with plenty of low end, a killer sound stage and a beautiful trunk to show off.

11/16/2021

This came together so nice. One of my favorites to date.

This came together so nice. One of my favorites to date.

Photos from Audio Solutions's post 06/30/2021

It may seem silly to most that I get so excited about this but I have fought this old saw for years. It has probably cost me more money in time than it ever made me. Now it’s time to try and get caught back up and make some dust!!#sawstop #customecaraudio #turnfullsheetstodust

06/17/2021

Anyone local happen to have one of these or something similar I could borrow, rent or steal for a week? Or maybe even a small enclosed trailer. Going to the Carolina coast. Happy to pay for the use of either.

Anyone local happen to have one of these or something similar I could borrow, rent or steal for a week? Or maybe even a small enclosed trailer. Going to the Carolina coast. Happy to pay for the use of either.

Photos from Audio Solutions's post 04/25/2021

Door panels for an Accord. Turned out nice few minor tweaks to get that perfect fit bit the went on the night before #mininats2021

Timeline Photos 01/15/2021

Never been called distinguished before. Thanks @hybridaudio I am truly honored.

Never been called distinguished before. Thanks @hybridaudio I am truly honored.

01/15/2021

With all the darkness in the world please allow me to cast some light.

12/18/2020

If you have a 12 volt power source we have a solution for you. John Deere gator for a radio and four speakers. All customer owned product on this one. Nothing fancy just some tunes in a Gator. #audiosolutions #johndeere #musiciseverywhere

12/02/2020

If you saw the first video on this boat you saw it was a mess. We removed all the insufficient wire wiring from the boat and ran all new OFC wire for the amps and speakers. Cleaned up the install and properly tuned it. The rest of this boat will be fixed in a “phase2” install in the future.

11/30/2020
11/19/2020

In today’s times most people want bass but are unwilling to give up the space it requires. Completely understandable!! In the case of this 2020 Ram Meagacab he had some space to lose but still wanted to keep the functionality of the storage tray behind the seats. After a little bit of trimming and moving we were able to fit two Kicker L7T 10’s in a ported downfiring enclosure and retain a little over half the depth of the factory storage compartment( raised a few inches of course). In the end we ended up with plenty of bass, a factory appearing install and a very happy customer.

10/02/2020

I am horrible at posting on social media, I will try to do better. This is a M3 that the customer didn’t want to take up a ton of room in the trunk or have anything “flashy”. He also didn’t really like the way the tower brace looked, so we hooked him up with a full Hybrid Audio set up and built a functional enclosure that incorporated the tower brace. Sometimes you have to turn things upside down to get where you want to be. #lowkeylookshighkeysounds #AUDIOSOLUTIONS #HybridAudio #customfunctionality #BMWaudio #M3

06/25/2020

Jeep Wrangler in for two Kicker L7 8’s, Kicker CX AMPS, JVC KW-M560 head and Hybrid Audio speakers all around.

06/06/2020

Jaguar F Pace for a single 10” sub upgrade.

05/28/2020

Get your bike ready for when all this rain stops. #hybridaudio #greatsoundingbikes #audiosolutions #arcaudio Hybrid Audio Technologies Arc Audio

05/21/2020

Have a manual transmission and think you can’t have remote start? Think again we can take care of that too.

05/15/2020

Nice day to do a marine upgrade.

11/17/2019

Day four sound quality summit going down.

11/14/2019

Time to get my learn on!!

10/09/2019

It’s how I start my day.

01/03/2019

Ekstensive Metal Works

🙏🏼🙏🏼 https://www.gofundme.com/eliud 🙏🏼🙏🏼 This year has been tough.. For those of you that have ever been by the shop know that it takes a big team to get things done over here. One of our most important members of that team is Lulu. He has been standing next to Bill since day one. “The kid from across the street” has grown to become one of the most valuable components of our shop. Lulu was rushed from the shop a couple weeks ago with a very high fever. With no previous health conditions, the doctors were baffled at his body temperature. A series of tests were conducted including a very painful bone marrow biopsy. After testing, it was concluded that Eluid has a form of leukemia - acute promyelocytic leukemia (APL). This is extremely heartbreaking. He is loved by so many and we cannot express how badly we want him to get through this as quickly as possible. This form of cancer has a very high recovery rate with the right treatment. The unfortunate part is the fact the medication is overwhelmingly expensive. This GoFundmMe is set up just for that. We need help getting him and his family through this. Please consider that any donation will help him and his family in a way that words cannot express. This is gods plan and we know we will all grow from his illness. God Bless #texasmetal #ekstensive #houston #ekstensivemetalworks #greatguy #sharingiscaring #houstonstrong #gofundme #help #donate #love #donations #godbless #gofundmedonations #fundraiser #cancer #gofundmecampaign #crowdfunding #christmas #newyear

12/08/2018

Details and fab fun on a F150 limited. Just because you can’t see it doesn’t mean it’s not important. #carbidecult #fabtools #fabricationnotfabulous #lovewhatIdo

12/08/2018

2017 F150 turned out sounding amazing. #hybridaudio #arcaudio #kickeraudio

10/05/2018
10/03/2018

Something I did years ago.

10/03/2018

If you are new to this page, a long time follower, like what you see or even hate what you see do me a favor and share share share this page please. I would greatly appreciate it.

09/28/2018

Motorcycles have become a specialty for us. Tearing yours down for winter upgrade? Got a ‘14 and up and other shops have told you they can’t help? Give us a call. We have invested in the tools that allow us to flash your ‘14 and up for superior sound.

06/18/2016

Finished this boat up today. Upgraded from a single 6 1/2" on each side and overhead on arch to dual 7.7" on sides and single 7.7" overhead. Sounds amazing and is crazy loud. Customer was overly happy and that's all that matters to me.

06/13/2016

Hate working on Sunday but my ox was in the ditch today. Getting ready for a busy week. Full of killer audio and some pretty cool fabrication tricks.

06/13/2016

Did somebody say snow? In June? It snowed at my place so I had to make a weird little snow man.

04/22/2016

Friday mobile work flow. Gotta love it.

04/16/2016

Got this all cleaned up and tuned in. Hybrid Audio Unity 6 1/2's in front faring with Imagine 6 1/2's in headlight buckets mounted on crash bars and Imagine 6X9's in the bags all drivin by an Arc Audio Moto 600/4. Sounds absolutely amazing.

04/13/2016

Looking forward to today.

04/07/2016

I had the best helper while out doing some mobile work today.

Videos (show all)

I am horrible at posting on social media, I will try to do better. This is a M3 that the customer didn’t want to take up...
Have a manual transmission and think you can’t have remote start?  Think again we can take care of that too.
SFT.750XXX taking care of some 1" cast acrylic. Sorry for the shaky video. 12vtools
This one was fun!!!! Two HD 600/4's, One HD 750/1 and a Bit One all motorized 18".

Telephone

Address


117 Oates Rd
Mooresville, NC
28117
Other Audiovisual equipment in Mooresville (show all)
Petes Communications Inc Audio Video Specialist Petes Communications Inc Audio Video Specialist
Mooresville, 28117

Custom Audio Video Installation. 3D 4K, LCD, LED Installs. Surround Systems, Whole House Sound Systems, Data, Phone, TV Outlets, Luma Camera Surveillience Systems. www.peteofalltrades.com

General Microcircuits, Inc. General Microcircuits, Inc.
1133 N Main St
Mooresville, 28115

General Microcircuits, Inc. is a global electronics manufacturing company.

Today's Audio Video, Inc. Today's Audio Video, Inc.
Mooresville, 28117

The Area's longest serving Audio Video Company.

Sight And Sound Creations Sight And Sound Creations
Mooresville, 28115

we gladly provide affordable commercial sound system installations, dj/mc services, and media conversion