Kudnol Motor Spares

Happy New Year

⚙️Fuel Pressure Sensor. When this sensor is damaged, several symptoms can appear on the car, including:

✍️Difficulty in starting: The car may have difficulty starting due to the insufficient amount of fuel reaching the engine.

✍️Engine stalling: The engine may suddenly stop while driving due to incorrect fuel pressure readings.

✍️Reduced engine performance: You may notice a decrease in engine power and torque, especially when accelerating.

✍️High fuel consumption: A damaged sensor may lead to an incorrect fuel pressure reading, which leads to increased fuel consumption.

✍️Warning light appears on the dashboard: The Check Engine Light may appear due to a damaged sensor.

✍️Abnormal vibrations: You may feel abnormal vibrations in the car, especially at low speeds or when stopped.

If you notice any of these symptoms, it is recommended to check the fuel pressure sensor and make sure of its condition.

Car Starter Motor and Jump-Starting Process

The starter motor is a key component in your vehicle's ignition system. It's a cylindrical part with visible windings and two terminals, labeled "Positive" and "Negative." When using jumper cables to jump-start a car, the red cable connects to the positive terminal, and the black cable connects to the negative terminal.

Jump-Starting a Car:

When a car battery is dead, jump-starting allows the starter motor to get power from a working battery, helping crank the engine. However, there are a few things to keep in mind during the process.

Common Issues to Watch Out For:

1. Incorrect Terminal Connection – Connecting cables to the wrong terminals can cause sparks or damage the electrical system.

2. Dead Battery – If the battery is completely drained, jump-starting may not be enough, and the battery could need replacement.

3. Faulty Starter Motor – If the motor itself is faulty, even a jump-start won’t work.

Safety Tips:

Always wear safety goggles when handling jumper cables.

Ensure the car is in Park or Neutral before starting.
Follow the proper cable connection sequence: positive to positive, negative to negative.
Avoid touching metal parts while connecting the cables.

Start the car with the good battery first, then the one with the dead battery.

Important Reminder: Jump-starting is only a temporary fix. Afterward, check the battery's condition and charge it fully or replace it if necessary. If you're not confident in jump-starting, it’s better to consult a mechanic.

In a car, idlers, also known as idler pulleys, have several functions, including:
Guiding the belt: Idlers guide the engine drive belt around the engine's parts, such as the alternator, water pump, and power steering pump.

Providing tension: Idlers help maintain tension in the belt.

Regulating the belt: Idlers regulate the timing belt so that it rotates smoothly.

Reducing vibration: Idlers support the belt to reduce vibration.

Increasing the wrap angle: Idlers can increase the wrap angle of the belt, which increases the contact area between the belt and the pulley. This increases the force-transfer capacity.

Changing the direction of transmission: Idlers can change the direction of transmission.

Idlers are a common part of most vehicles and are made of hard materials like steel or plastic. They should be inspected regularly and serviced often to monitor their condition. If an idler pulley fails, the car won't operate.

Introducing the Motor Cycle Shelf

Inn-Tank High Pressure Pumps available starting from $12 each. Visit Kudnol Motor Spares - The Spares Shop at ZIMPOST TRIANGLE for these and related items. Call us on 0772532021 /0719532021 or WhatsApp us on 0783343862 for more information

Wheel Bearings

Home Of Quality Products

Copper Washers are available in store. Visit Kudnol Motor Spares The Spares Shop at ZIMPOST TRIANGLE for these and related items.

Our products lines