Crumptons Speed Shop

C6 vette in for a little loving

Little bronco 2 we've been working on over the past couple of months. Customer had me come pick if up and said fix whatever you find wrong with it. So it's turned into a little project but it's almost finished. Just need to tune it and do a final look over and repair the shifter.

2011 silverado 2500hd in for no movement when put in drive or reverse. Installed a new transfercase in it from kodiak trucks and it's back up and going better than before

Went and picked up a little ct5-v blackwing today and brought it to the shop for some exhaust valve actuator repair after a corsa exhaust install.

2017 L5P that was brought in missing a valve spring keeper. Found one lifter missing all of its needle bearings, damaging a lobe on the camshaft and damaging the oil pump. Tore down to a short block, inspected some bearings to make sure all was good, then rebuilt it with all new / upgraded parts

11 ram 3500 in for a new turbski, exhaust manifold and repair a coolant leak

Bean just doing bean things

2018 silverado in for a rough coldstart missfire, some oil leaks and multiple random electrical issues. Rough coldstart is a common issue on them due to failing injectors, so truck got 8 new oem injectors, new HPFP, plugs and wires and new oil cooler lines. Also found all the electrical issues to be a loose ground on the back of the driver side cylinder head that someone had left loose.

Last minute engine issue a few days before leaving for flordia. Had to take our personal shop truck apart for a camshaft / lifter issue. But thankfully parts were available for overnight shipping and a top notch machine shop Hamm's Machine Shop, we were able to get it fixed back up in just a few days.