Construction Finsh

A Walkway and Patios done for this Clients Day Care in Crosby, Texas.

The walk ways measured approximately 90’ length in total.

A Patio that measured 15’ x 16’

As well as second Patio that measured 7’ x 15’

A Driveway done for a client In East End.

Not only did they want the entrance new we also installed San Augustine grass for this client.

This job measured approximately 36’ x 20’.

We removed and replaced said area and used rebar #3 with 3500psi concrete.

Another small project done for a Veteran here in the North Shore area in East Houston.

A Commercial foundation project done for a client here on 610 and Broadway

All footing was at 2’ depth with rebar # 5 with rebar rings, rebar #4 was used above with 20-24” centers, we used 3500 psi concrete for this project.

Additional room done to a clients house in Deer Park ,Texas.

The Extra space was approximately a 16’ x 18’.

If you or anyone would be interested in any residential work or light commercial work please feel free to contact us at [email protected]

Partial driveway completed for a client in East Houston Texas

We used rebar #3 at 18” centers. 3500 psi concrete

We were set at 4 “ depths.

We scraped dirt and crushed concrete to grade.

Removal of dirt and grass was done for a driveway in the East end of Houston.

Slab measured approximately 30’ x 50’

We used rebar #3 with 3500 psi concrete

All joints were diamond cut afterwards.

Placement of a slab was done for a client in Crosby Texas

Slab measured approximately 12’ x 30’

We used rebar #3 with 3000 psi concrete.

Removal and replacement of certain low spots of clients taco shop in Pasadena, Texas.

For this job we used rebar #4 and 4000 psi concrete.

Driveway extensions were done to this client entrance in Kemah Texas

Each side of the extension measured approximately 1’- 6” x 34’

We used rebar #3 and put Dow’s every 2’
Concrete 3500 psi was used.

Small project done for a client out in Katy Texas

This job measured about 10’ x 5’

We cut out and replaced the driveway area.

Removal and replacement of a driveway was done for a client in Crosby Texas.

All work was done to clients specifications.

We used rebar #3 with 3500 psi concrete.