Spayd's Industrial LLC

This was a handicapped ramp hand rail that had been damaged in a car accident. We fabricated, powder coated, and installed this new railing.

💥 We’re back! It’s been a busy while!!
We were busy installing a new incline conveyor system that feeds a paper shredder. We had removed both components out of another facility and re-installed them at another location for our customer. This took a lot of modifications and fine details in order to make these machines fit into their new home!

We fabricated and installed this aluminum toolbox for a heavy wrecker.

We fabricated the walls in this display trailer for a customer. One side is made to display the items and the other has a brochure/ pamphlet holder built in to go with the products on the other side 🤩

For this project, we fabricated a new cylinder mount for the hydraulic thumb on an excavator

Spayd's Industrial LLC updated their website address.

Spayd's Industrial LLC updated their website address.

We recently replaced the tooth on a stump splitter that had broken off

This is a recent project where we fabricated a “Trailer Bogie”. This is what holds the axles on a trailer in place to make the wheel base adjustable 🚛

We are a collection site for Toys for Tots! Collecting toys up until Dec. 6th- Stop on by our lobby if you’d like to donate 🎄

This is a custom fabricated aluminum catwalk we made and installed for the wash bay at Messick’s new location 🧼 🧽

We fabricated this guard to protect the beam behind it holding up a conveyor belt in a trash facility. This keeps machinery from running into the important beam by accident 💥

Here’s an excavator boom we repaired and added some reinforcements 💪

This is a HUGE cone we fabricated for a customer recently.

For this project we stripped, primed and painted the steel framework and then replaced the wood decking. Looking good as new now!

We removed, refabricated and installed a skidder blade attachment point.
A skidder is an implement used for logging 🪵

We fabricated and installed this custom aluminum ladder rack for a customer

Fabricated a rooftop transition cross over

Here’s a recent job where we had converted the front end of this trailer from a 4 fan system to a 2 fan system

Transportation and installation of this huge generator for a company that’s moving to a new facility.

This was a 50’x20’ concrete apron we dug out then poured outside a recycling facility. Trash trucks back up to this “tipping room” to dump their load.

We fabricated and installed what’s called an OCC shaft in a recycling center. This is the first machine in the process of separating the recyclables.

We recently installed what is called a “metering drum” used to control the height of material on a belt in a recycling center in Massachusetts.

Replaced the frame rails on this dump truck

Reconstructed the front of a trailer

We stretched a truck frame to add 52” and installed a lift axle 🛻

Custom yellow platform we recently built for a customer!

Spayd's Industrial LLC updated their business hours.

Spayd's Industrial LLC updated their business hours.

This was quite the project!

We put in a new CNC plasma table a couple months ago. We have the capability to cut 5ft x 10ft sheets and we can cut up to 1-1/2” thick. This has been a major help for the fabrication projects in our shop!

This is one of the most unique railings we have fabricated so far. We were very happy with how it turn out!

Heavy duty 36” bucket we fabricated with extra wear strip for longevity!

Stump splitter rebuild!