SAE Outlaw Performance

Dyno Tuning, ECU flashing, Custom fuel inj mapping. Harley Davidson pro tuner, power vision, pcv

07/20/2022

Titanium air shifter mount bolt. Few guys asked me to make these so I ran some if any one is interested in these.
$9.99

Photos from SAE Outlaw Performance's post 05/28/2022

I tune pretty much on a daily basis now. I dont post every bike thats on my dyno. But i will post ones that i feel like posting. This particular one needs to be posted. And the only reason is because the shop that tuned this bike bad mouths other shops as well as me. If your gonna charge the customer 1000 bucks to tune a bagger. A twin cam bagger no less, using the worst tuner for a harley..You better damn well be able to back up your s**t talkin. Customer was not happy with the bike and went back to sort it out and got no where except told theres nothing he can do about it.
Theres the proof not just in the peak numbers but in the drivability. And once again, theres no auto tuners that you bolt on and magically your bike runs good!!

Photos from SAE Outlaw Performance's post 04/30/2022

GSXR 1000 Heavy Duty Main Bearing Studs

SAE Outlaw Performance heavy duty main bearing studs.

Our studs are made from ultra high strength heat treated premium aircraft steel and feature rolled threads for maximum strength. The kit comes with 12 point high strength nuts.

The studs are broached for easy installation and removal. We have used several other companies studs in the past, and like everyone we were not happy with the quality and strength. Our studs have superior strength over the other name brands.

They install easy with no case drilling like other brands. We use superior materials that allow the diameter of the studs to remain 9mm and have better strength than the oversized studs.

Torque the studs to 23-25 ft lbs with molybdenum l**e. Install the studs into the cases using a few drops of oil and tighten to 8-10 ft lbs. Even though our studs can be torqued to 35 ft lbs safely, we do not recommend going that high as it can crush the cases and distort the bearing clearances.

Fits GSXR 1000 2001-2015

$119.99

Photos from SAE Outlaw Performance's post 04/30/2022

GSXR 1000 Heavy Duty Cylinder Studs

SAE Outlaw Performance heavy duty cylinder stud kit for the GSXR 1000. Our studs are made from ultra high strength heat treated premium aircraft steel and feature rolled threads for maximum strength. The kits come with hardened washers and 12 point high strength nuts.
The studs are broached for easy installation and removal. With added length to compensate for stroker or turbo application block spacers
They also have a shoulder to eliminate installation height issues. We have used several companies studs in the past, and like everyone, we were not happy with the quality and strength, Our studs have superior strength over the other name brands.
Torque the studs to 55-58 ft lbs with molybdenum l**e. Install the studs into the cases using a few drops of oil and tighten to 8-10 ft lbs,
Even though our studs can be torqued to 75 ft lbs safely, we do not recommend going that high as the case threads can be pulled out.
Fits the following

GSXR 1000 2001 - 2015
GSXR 750 2004 - 2005

$129.99

Photos from SAE Outlaw Performance's post 04/23/2022

Rollers been busy last few weeks.

Photos from SAE Outlaw Performance's post 03/30/2022

117 redo. Fixing up this 117 done by another shop. Before and after
Same size just the right parts and a real tune.

Photos from SAE Outlaw Performance's post 03/15/2022

Titanium clutch mod for ZX14 AND ZX10R

Titanium clutch mod for ZX14 and ZX14R. Fits all Years. Includes inner basket nut and clutch mod washer (replaces OEM Part number 92210-0152) SAE Outlaw Performance Clutch Mod is required for the ZX14 and ZX-10R to be launched smoothly from a dead stop! This clutch mod disables the factory slipper clutch. This allows the rider to perform a smooth launch as opposed to the bucking associated with trying to launch a stock machine from a dead stop. The added bonus is our mod is all titanium!! Saving you weight! The new nut has more surface area to eliminate the known stripping issue with the stock nut when you try and remove them Other companies sell just the clutch mod for more money.

$69.99

Photos from SAE Outlaw Performance's post 03/15/2022

Titanium Clutch Mod Kits for ZX14 and ZX10

Titanium clutch hardware kit for ZX14 and ZX14R. Fits all Years Kit includes the 6 spring perches and inner basket nut and clutch mod washer (replaces OEM Part number 92210-0152) SAE Outlaw Performance Clutch Mod is required for the ZX14 and ZX-10R to be launched smoothly from a dead stop! This clutch mod disables the factory slipper clutch. This allows the rider to perform a smooth launch as opposed to the bucking associated with trying to launch a stock machine from a dead stop. The added bonus is our mod is all titanium!! Saving you weight! The new nut has more surface area to eliminate the known stripping issue with the stock nut when you try and remove them Other companies sell just the clutch mod for more money. Our kit comes with 6 spring perches, clutch mod and a new nut all made from titanium!!

$99.99

01/26/2022

Hayabusa titanium inner clutch hub nut.
Replaces oem # 09159-24010

$24.99

Photos from SAE Outlaw Performance's post 01/26/2022

Titanium clutch hardware kit for Hayabusa
I have both for gen 1 and gen 2 busa. Short stud and long stud
Kits come with 6 studs and clutch nut.
$69.99 a set

12/30/2021
12/30/2021

Im seriously getting one of these to use on the customers that come in with all their own parts they bought because the internet says they are the best and make the most hp.SMFH

Photos from SAE Outlaw Performance's post 12/24/2021

Billet Fuel Rails GSXR1000. 2007-08
Uses stock style injectors
Comes with stainless mounting hardware
$119.99

Photos from SAE Outlaw Performance's post 12/07/2021

Billet oil fill caps for Suzuki Hayabusa and GSXR

ON SALE!!!
$15 RAW
$16 BLACK

Photos from SAE Outlaw Performance's post 12/01/2021

Lightened Billet fuel rails gen1 busa and 01-02 gsxr 1000
These are a lightened version of the standard gen 1 rails. It saves about 5 ounces over the standard rails. Some grudge guys were asking me to see what i can do. I ran some off to see how they will move.
Comes with stainless mounting hardware
$119.99

11/24/2021

Titanium motor mount bolts for Hayabusa.
A bunch of guys have been asking for just the 2 long bolts for the busa. I ran a few sets to see how they will move.
$199.99

Photos from SAE Outlaw Performance's post 11/09/2021

2020 low rider s in for the treatment. Squeezed this one in this week. Cam swap and exhaust. Few internal upgrades while it was apart.

10/06/2021

Looky what we have here! Another killer head and cam for a busa goin to canada. Wonder what this one will make 🤔🤔🤔

10/04/2021

Suzuki Hayabusa Rear Caliper Delete Spacer
$24.99
Fits all year Hayabusa and GSXR 01-08

Photos from SAE Outlaw Performance's post 09/30/2021

Titanium drive stud kit for BST and MARVIC.
Just finishing these up. Guys have been asking me to make them.
BST drive stud kit comes with 5 studs and nuts.
Size is 10mm x 50mm x1.25mm
$99.99 a set

MARVIC drive stud kit comes with 6 studs and nuts.
Size is 10mm x 27.5mm x 1.25mm
The studs are knurled and are broached with hex head. The studs that come with the marvic wheels are not broached so after awhile the knurl will not hold when you are removing or installing sprockets. The allen head makes it easy.
$109.99 a set

Photos from SAE Outlaw Performance's post 09/15/2021

Hayabusa Main Bearing Studs.

SAE Outlaw Performance heavy duty main bearing studs.

Our studs are made from ultra high strength heat treated premium aircraft steel and feature rolled threads for maximum strength. The kit comes with 12 point high strength nuts.

The studs are broached for easy installation and removal. We have used several other companies studs in the past, and like everyone we were not happy with the quality and strength. Our studs have superior strength over the other name brands.

They install easy with no case drilling like other brands. We use superior materials that allow the diameter of the studs to remain 9mm and have better strength than the oversized studs.

Torque the studs to 23-25 ft lbs with molybdenum l**e. Install the studs into the cases using a few drops of oil and tighten to 8-10 ft lbs. Even though our studs can be torqued to 35 ft lbs safely, we do not recommend going that high as it can crush the cases and distort the bearing clearances.

Fits all year Hayabusa. 99-20

$109.99

Photos from SAE Outlaw Performance's post 09/14/2021

Hayabusa Heavy Duty Cylinder Stud Kit

SAE Outlaw Performance heavy duty cylinder stud kit for the Hayabusa. Our studs are made from ultra high strength heat treated premium aircraft steel and feature rolled threads for maximum strength. The kits come with hardened washers and 12 point high strength nuts.

The studs are broached for easy installation and removal. With added length to compensate for stroker or turbo application block spacers

They also have a shoulder to eliminate installation height issues. We have used several companies studs in the past, and like everyone, we were not happy with the quality and strength, Our studs have superior strength over the other name brands.

Torque the studs to 55-58 ft lbs with molybdenum l**e. Install the studs into the cases using a few drops of oil and tighten to 8-10 ft lbs,

Even though our studs can be torqued to 75 ft lbs safely, we do not recommend going that high as the case threads can be pulled out.

Fits all year Hayabusa 99-20

$169.99

Photos from SAE Outlaw Performance's post 07/19/2021

Titanium Rear Sprocket Carrier Bolts Kits. 10mm x 1.25
Kit comes in 5 or 6 pieces depending on your application.
These are machined to be super light weight
$35.99 for 5 pieces
$39.99 for 6 pieces

07/12/2021

ZX 14 CBR Wheel conversion kit

Kit comes with bearings and spacers to fit a 99 CBR wheel to your ZX14. It will fit all year ZX14s.
The 99 cbr wheel has a larger outside diameter 47mm bearing. This will not work if you have the smaller 42mm diameter wheel.
It uses your stocl ZX14 axle, just swap the bearings and new spacers.
$59.99

06/28/2021

Titanium Header Stud Kits
Comes with 8 studs, nuts and washers
These will fit
Hayabusa, GSXR 1000, 750 and 600
ZX14
ZX10
8mm x 50mm x1.25
Studs are broached for easy installation and removal.
$74.99 set

Photos from SAE Outlaw Performance's post 06/09/2021

Seat screws for Harley Davidson. Fits most models and years.
I have them with either SAE logo or the
Dynocologist trademark
Black anodize with diamond knurl finish.
Comes with stainless mounting hardware and black plastic washer.
$19.99

Photos from SAE Outlaw Performance's post 04/16/2021

16 roadking gettin some love

Photos from SAE Outlaw Performance's post 03/31/2021

Another H2SX finished up. Cat delete and mid pipe. Reflash and tune. Before and after

Photos from SAE Outlaw Performance's post 02/16/2021

Got a few brand new HDs in for some mods. Drop shipped direct from the dealer!! Nothin like new..

01/25/2021

Some surface grinding and big studs for this bad boy

12/15/2020

This thing has to be the scariest s**t I ever tuned. Stupid!

12/10/2020

For all you guys thinking of buying that vortex tuner. Complete garbage. This was a 2013 yfz450 quad stock with exh. Spoke to a distributor in the u.s. about it. All I have to say is this, when you tell me you dont need a dyno to tune using this tuner, you need to find a new job. It self tunes he says. Ya. Ok!
Heres the proof its junk. The lowest graph is as the quad came in which the tuner was set by the owner and he says it ran good. Maybe hellen keller good, but not even close to good. The middle graph is after i made adjustments to the vortex tuner and got the best results. Which still were no where near tuned correctly. I than took the stock ecu and put it back on the quad. And those are the best numbers. You can see it still needs to be tuned, but the vortex tuner just ran like dogs**t all around. Idles at 10.5 afr. And i just finished a bike earlier with the same tuner. A 2019 450L honda. Same deal. 10.8 afr at idle. And very rich up top and very lean in the middle. . It was set as per instructions. How you can sell something like that and say it runs correctly is a fu**in joke!!!

10/22/2020

Finishing up this one. Did a cam swap and exh swap to get some more power between 2-3k.

Photos from SAE Outlaw Performance's post 09/18/2020

ZX14 titanium stator bolt and spacer.. fits all years
$39.99

07/30/2020

You know you want one

07/14/2020

Titanium stator and starter clutch bolt with titanium washers. The bolts are gun drilled to remove as much weight as possible.
Stock 94 grams
Titanium 45 grams
I ran off some more titanium pieces a few guys asked for.
These are for the stator amd starter clutch for all year hayabusa and 01-08 gsxr. I need to check and see if they will work on new gsxr also.
$39.99 for the set

Photos from SAE Outlaw Performance's post 07/08/2020

Alittle upgrade for this soft tail.
Before and ofter.
Increase in compression, different cams, amd tuned.

07/03/2020

When those dealerships keep bringin in those 2020s they must know something.

06/03/2020

Im feelin a flash sale!!!
How about the titanium hardware kit for busas.
$375 shipped!!!!
This sale is good until midnight 6/5/20

Videos (show all)

Im seriously getting one of these to use on the customers that come in with all their own parts they bought because the ...

Telephone

Address


435 Brook Ave
Deer Park, NY
11729

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 10am - 3pm

Other Deer Park shops (show all)
JoyLot.com JoyLot.com
20 Dunton Ave
Deer Park, 11729

JoyLot Official Fan Page

Atlantic Shores Furniture Service Inc Atlantic Shores Furniture Service Inc
9 Brandywine Dr
Deer Park, 11729

FauxWoodBeams.com FauxWoodBeams.com
Deer Park, 11729

Faux Wood Beams bring beauty to your home without real wood's high cost. Our realistic, durable polyurethane beams will enhance any decor.

Oceanview Aquarium Service Oceanview Aquarium Service
Deer Park, 11729

Professional aquarium cleaning and moving service for the New York, New Jersey area. Fully Insured,

Jump And Slide Entertainment Jump And Slide Entertainment
20 Lucon Drive
Deer Park, 11729

Long Island Bounce House Rentals.Water slide rentals,Inflatable party rentals, Tent tables & chairs.Mechanical bull rentals, Laser tag parties .Jump and Slide Long Islands BEST inf...

Apple Ice Apple Ice
171 E Industry Ct
Deer Park, 11729

From packaged ice to ice sculptures and luges, Apple Ice is the industry leader that you can depend on. In addition to being New York's #1 distributor of bagged ice, we also offer ...

Constructive Design, Inc. Constructive Design, Inc.
158 Adams Street
Deer Park, 11729

"Quality Never Costs...It Pays"

Curiously Creative Candles Ltd. Curiously Creative Candles Ltd.
We Have Five Seasonal Locations. Mattituck, Riverhead, Patchogue, Cutchogue, East Setauket
Deer Park

We manufacture candles of all types. Soy, Palm, Paraffin and other types. Also we do ribbon imprinting, favors and centerpieces for all occasions!

Road Runner Rentals Road Runner Rentals
Deer Park, 11729

All Party Rentals and Services in one place! Tents Packages, Balloons, Linens, Waitress, Kids Entertainment and much more!

Kangaroo Kids Inflatable Party Center Kangaroo Kids Inflatable Party Center
1015 Grand Blvd
Deer Park, 11729

Private Birthday Parties for Kids Who love to Bounce at reasonable prices & Open Play by appointment or pre scheduled on our Facebook. Text 631 871-8762

Elite Telecom Partners, LLC Elite Telecom Partners, LLC
44 W. Jefryn Blvd Suite Q5
Deer Park, 11729

ETP is a full service wireless development consulting company headquartered in the Long Island area.

Victorian Flower & Gift Shoppe of Deer Park, NY Victorian Flower & Gift Shoppe of Deer Park, NY
686 Long Island Ave
Deer Park, 11729

The Best Dressed Flowers arrive from Victorian... from Low & Lush to Big & Bold! Other creations include gorgeous WEDDING arrangements, loving SYMPATHY tributes, brimming GOURMET ...