Bernard Mondello Racing Enterprises

Bernard Mondello Racing Enterprises

Comments

When will your online store be up & running?
I used to know you father, he would come and run his engines on lambecks dyno when I worked there.
1994 Joe Mondello Oldsmobile Nationals Norwalk,Ohio July 17,1994
Thank you Bernard!
Santa Loves Oldsmobiles

‘Twas the night before Christmas and in the garage,
There wasn’t a trace of a Ford or a Dodge.
The presents were wrapped and the lights were all lit,
So I figured I’d mess with my 442 for a bit,
I pop the release and lifted the hood,
When a deep voice behind me said “It looks pretty good”
Well, as you can imagine, I turn mighty quick,
And there, by the workbench, stood good ol’ Saint Nick!
We stood there a bit, not too sure what to say,
Then he said, “Don’t suppose you would trade for my sleigh?”
I said, “No way, Santa” and started to grin,
“But if you got time, we could go for a spin!”
His round little mouth, all tied up like a bow,
Turn into a smile and he said, “Hey! let’s go!!”
So as not to disturb all the neighbors’ retreat,
We push the 442 quietly into the street,
Then, taking our places to drift down the hill,
I turned on the key and let the clutch spill.
The sound that erupted took him by surprise,
But he liked it a lot, by the look in his eyes.
With the BF Goodrich’s crying and OAI hood aglow.
We headed on out, where the gear heads all go.
Santa’s grin widened, approaching his ears.
Then he yield, “Can’t recall when I’ve felt so alive!”
So, I’ve backed off the gas and said, “You wanna drive?”
Ol’ Santa was stunned when I gave him the keys,
When he walked past to headlights, he shook at his knees!
The ol’ Oldsmobile exploded with dual exhaust sound!
Santa let out the clutch and the tires shook the ground!
Power shift into second, again into third!
I sat there just watching at lost for a word,
Then I heard him exclaim as he grab fourth gear,
“Merry Christmas to all and a Happy New Year!!!”

The author is unknown
Ty Bernard for the Roller Rockers , work and fit great !
Thank you Bernard mondello racing for all the help and advice in selecting and supplying parts necessary for my 455 olds build . I’ve been having a blast driving and tuning this little cutlass 👍
Finally got my car running. PC heads, intake and rockers from you. Thanks
Finally got my 455 purring and the car road ready. It’s been a process and thanks to Bernard I’m not bending anymore pushrods, the top end of my motor looks awesome and it sounds bad ass. Thank you sir
First fresh air for two years. My dream car is slowly coming together 😃
I saw some of these Pontiac heads on ebay but dont see them listed on their website, i know they're pontiac heads but do you have any insight on these?

"Home of Competition Racing Cylinder Heads that WIN Races" We are distributors for AFR, Brodix, Dart and RHS, etc.

We specialize in building the finest racing engines for Chevrolet "aftermarket" and small block Fords "aftermarket". We offer modified, fully ported & flowed "as cast" cylinder heads, as well as modified "cnc" racing cylinder heads. We also modify "as cast" or fabricated racing manifolds for improved flow characteristics. We sell and use only the finest in "MADE IN USA" (where possible) performance and racing hardparts.

11/21/2022

Hello again,

We've just received another two Edelbrock Victor 2810 Big Block Oldsmobile intake manifolds!

But we only have one available for sale If anyone Is needing one???

$629.95 plus shipping contiguous 48. No sales tax unless you live in California!

Thank you for looking,
Bernard Mondello Racing Enterprises

11/15/2022

Hello again,

Yeah more, and more still coming!!!

bernardmondelloracing.com

11/07/2022

Hello again,

SOLD OUT... Thank you!!!

Well after 2 years of waiting for these awesome Edelbrock Victor Big Block 2810 Oldsmobile intake manifolds!

We have filled all back orders and we have 2 left to sell If anyone is interested in purchasing what remaining manifolds we have...

The price Is $629.95 plus shipping contiguous 48, no sales tax unless you live in California!!!

Thank you,
Bernard Mondello Racing Enterprises

10/25/2022

Hello again,

We're getting ready to do some billet 4.500 stroker balancing in the next few days!

I think we're going to have some happy customers... yeah!!!

Thank you for looking,
Bernard Mondello Racing Enterprises 💯 🏁

10/19/2022

Hello again,

Another set of custom CP/Carrillo new style Oldsmobile Edelbrock heads pistons, going out the door 4.350" bore size!

Thank you for looking,
Bernard Mondello Racing Enterprises

09/30/2022

Hello again,

If this stamp is on your Edelbrock Oldsmobile cylinder heads!

Matthew Priddy...

Lot's and Lot's of pride in workmanship and details, have gone into your cylinder heads!!!

Not to mention that Premium Package get all parts except the head castings, valves and guide plates are replaced with all very high quality components! 👍

Thank you for looking,
Bernard Mondello Racing Enterprises

Photos from Bernard Mondello Racing Enterprises's post 09/29/2022

Hello again,

Our Badd Dude exclusive custom CP Pistons are here for our customer Bradley Moore!

These have the new Edelbrock combustion chamber shape machined into the quench of the piston for greater volumetric efficiency!

We're very proud to bring these to our customers, and any custom pistons made for Edelbrock cylinder heads in the future will have this design!!!

These are left hand and right hand design...

These are available in both dome or as shown dish configuration!

Oh, and the tooling path marks are as smooth as a baby's bottom! 😆

Thank you for looking,
Bernard Mondello Racing Enterprises

09/28/2022

Hello again,

I'm having to post this video because these are the brand new Edelbrock Oldsmobile cylinder heads!

With the same old issues of the past, and I truly thought they'd get these right...
But NO they didn't!

Valve guide to valve clearance on the intake valves .001 and exhaust valves .0008-.0009!

This is just one of problems I see as a professional cylinder head business!

And I heard someone famously say about these heads... They come with a warranty from Edelbrock???

And they do, but I really don't want to damage other parts in the chain of, they have a warranty???

The heads are now intake. 0014 and exhaust. 0016 dead nuts top to bottom!!!

Thanks for looking,
Bernard Mondello Racing Enterprises

Photos from Bernard Mondello Racing Enterprises's post 09/14/2022

Hello again,

We're shipping a large order tomorrow with custom pistons, S**t SB connecting rods, early bolt pattern flywheel, custom Harland Sharp rocker arms and a custom roller hydraulic camshaft...

The reason for this post is the custom pistons. We're very versed in any all custom pistons needs... The actual piston shown is a 4.100" bore size small block Oldsmobile with cast iron heads!

The last picture is our final design of our new version Edelbrock custom piston design... It's available in both inverted dish or dome configuration, a Bernard Mondello Racing Enterprises exclusive piston!!!

Thank you for looking,
Bernard Mondello Racing Enterprises 💯

08/22/2022

Hello again,

Another pallet has showed up here at Bernard Mondello Racing Enterprises!

This time with 61029 for hydraulic flat tappet camshafts!!!

And another pallet is on It's way with more...

Thank you for looking,
Bernard Mondello Racing Enterprises

08/11/2022

Hello again,

Paul Gasiorowski! Your name has been called to the blueprinting porting bench!!!

These new style Edelbrock cylinder heads are getting our Premium Package blueprinting for one of our hydraulic roller camshafts!

Thanks for looking
Bernard Mondello Racing Enterprises

Photos from Bernard Mondello Racing Enterprises's post 07/15/2022

Hello again,

Let the Premium Package blueprinting begin!!! 😃

We have fulfilled all of our Edelbrock 61025 hydraulic roller camshaft heads orders as they come from Edelbrock!

And we have finally received enough Edelbrock heads to start all the pre-orders for our AWESOME Premium Package blueprinted version of these new design heads... we'll start the blueprinting sometime next week if everything goes as planned!!!

Some very good news for all of our customers that have waited SO patiently for this time to come, just a note there's still patience you need to have because blueprinting takes time!!!

Thank you for your patience,
Sincerely,
Bernard Mondello Racing Enterprises

07/04/2022

Happy Birthday America!

And The 'Rockets Red Glare'... Only as our Oldsmobile Rockets can do!!! 🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲

Please be safe and sane as best you can!

Enjoy,
Bernard, Gina and Nicolina Mondello

Photos from Bernard Mondello Racing Enterprises's post 06/22/2022

The first of the 61025 Eagles have landed... FINALLY!!! Small Block heads 61035 and 61039 to follow at a much later date???

Actual head pictures coming soon. 😃

The first of many more pallets of customer pre-orders got here yesterday and this is the first chance we've had to let you know this GREAT news!!!

Thank you for looking!
Bernard Mondello Racing Enterprises

05/23/2022

Hello again,

The Gold Standard in Performance Oldsmobile Aluminum cylinder heads!

These are our Premium Package blueprinted cylinder heads for hydraulic roller camshaft!

Heads By Mondello... From the one and only real Mondello in the Performance Oldsmobile business!!!

Bernard Mondello Racing Enterprises

Engine Oil Codes Explained, SAE (Society of Automotive Engineers) numbers - Oil Viscosity Explained 05/04/2022

Engine Oil Codes Explained, SAE (Society of Automotive Engineers) numbers - Oil Viscosity Explained

I think this is a worthy video about oil and its viscosity ratings... Especially for Oldsmobile engines!

Thank you for watching.
Bernard Mondello Racing Enterprises

Engine Oil Codes Explained, SAE (Society of Automotive Engineers) numbers - Oil Viscosity Explained * VISUALLY EXPLAINED * Efficient Understanding!Images in this video are Created and Copyrighted to Craig Kirkman of The Repair Specialist Channel and 'no' ...

04/27/2022

Hello again,

We're finally getting some partial orders in, with still more to come... But at least some progress!!! 😃

Thank you for looking,
Bernard Mondello Racing Enterprises

04/15/2022

We're closed today to observe Good Friday!

Happy Easter to one and all who observe!!!

From our family to yours,
Bernard, Gina, and Nicolina Mondello

Photos from Bernard Mondello Racing Enterprises's post 04/13/2022

Hello again,

SOLD SOLD SOLD... Thank you Dave Kirby for your purchase and past purchases!!!

This will not last very long. I'm sure of it! 😃

We just received the absolute last S**t billet 4.500 stroke crankshaft in existence, and we didn't know we were getting it until last week!

In saying this, we have a full rotating assembly for sale NOW but will take about 14 - 16 weeks for delivery?

The price on this last rotating assembly is $6000.00 plus shipping...

The link below explains what's in this kit!

https://facebook.com/100063613386701/posts/339751761488601/

Thank you in advance,
Bernard Mondello Racing Enterprises

04/13/2022

Porting some customer owned Mark Ricker SpeedMaster heads today for his new 496 Cu In engine, he purchased all the components for It from us!!! 😀

Note; These are not fully ported heads, these are known as our Premium Package hydraulic roller camshaft head Package!

Thank you for looking,
Bernard Mondello Racing Enterprises

03/09/2022

Oh yeah,

Looking down the ported and polished/blueprinted oil pump into the mirror image ported rear main cap entrance going to the main oil galley... Successfully!!! 😃

Bernard Mondello

03/02/2022

Hello again,

Frank Mares, you have made the porting/blueprinting bench... Any day now for completion! 😃

I'm still waiting on your windage tray!

Bernard Mondello Racing Enterprises

Timeline photos 02/28/2022

As I head to the March Meet in Bakersfield this week, Famoso the Patch... This memory means more than ever to me!!!

Dave Smith 'Race In Peace' MY friend! ❤🙏💯🏁

Oldsmobile guru/longtime good friend Dave Smith and I at the California Hot Rod Reunion!!!

01/28/2022

Hello again,

Just a short video of Bernard Mondello Racing Enterprises, doing some valve pocket throat finnish sizing for a little 565 Chevrolet E85 street engine we supplied all the engine parts for!!! 😃

The Real And Only "Heads By Mondello"

Thank you for looking,
Bernard Mondello

01/10/2022

Yep... We sell these in many different flavors!!! 😎

Yours truly,
Bernard Mondello Racing Enterprises

Photos from Bernard Mondello Racing Enterprises's post 01/04/2022

Hello again,

Our stroker kits are officially SOLD OUT!!! 😃

Thanks to all that have purchased them!

The strongest and most comprehensive billet stroker 4.500" crankshaft rotating assembly ever... At this price!!!

We only have 3 crankshafts left to build our AWESOME stroker kits out of... 😪

Our comprehensive, complete Billet rotating assembly is $6000.00. AS DESCRIBED below!!! LIMITED SUPPLY WHILE THEY LAST!!!

One thing we should address is that this rotating assembly is designed for aluminum heads only!

The ultimate in performance and reliability, due to the strength and rigidity of being made from round stock billet 4340 Chromaly... And center counterweighted! 😁

We have S**t billet Oldsmobile 4.500 stroke crankshaft's again, in which we can build a complete rotating assembly's in the description and pictures below...

Our ultra premium Oldsmobile 488 or 495 Cubic Inch billet crankshaft rotating assembly... The quality is unsurpassed by any other stroker kit available!

If you're using a Rocket Racing' Badd Ass' Block, custom pistons are available in larger bore sizes 4.250=511, 4.310=525, 4.375=541, 4.400=547 Cubic Inches... @ extra cost $$

Using a S**t billet 4.500 stroke crankshaft, S**t H-beam 7.100" long rods w/ARP 8740 cap screw rod bolts (ARP 2000 bolts extra $ if needed), CP bullet X forging pistons with 1.5mm 1.5mm 3mm ring pack, Clevite H rod and main bearings, BHJ billet SFI harmonic balancer with Oldsmobile 4 bolt pattern and pulley registration, and ATI SFI flexplate fully internally balanced by Bernard Mondello Racing Enterprises...

Please note: We have no affiliation with Mondello Performance Products Inc...

Please allow 14 - 16 weeks to build and balance.

Complete. Plus, shipping!

Thank you in advance,
Bernard Mondello Racing Enterprises

01/02/2022

We just want to let everyone know that we have closed our eBay store!

We had so little listed on there, we felt It was the right thing to do...

Kindest Regards,
Bernard Mondello Racing Enterprises

01/01/2022

You know that's right!!! 😎

01/01/2022

Bernard Mondello Racing Enterprises would like to wish everyone a Happy New Year 2022!!!

Let's make It a GREAT one... Cheers! 🍺💯🏁🇺🇲

12/24/2021

Merry Christmas! 🌲

To our family and awesome customers past and present, from the Mondello family!!!

And a healthy and prosperous New Year 2022...

With Love from our family to yours,
Bernard, Gina and Nicolina Mondello

Photos from Bernard Mondello Racing Enterprises's post 12/16/2021

Hello again,

Well we finally got our order for Edelbrock Performer 2151 intake manifolds!

We have filled all our back orders including with our AWESOME plenum center divider modification!

If you're looking for either an out of the box 2151, or our modified version as shown not fully blended yet?

Our plenum modification version allows this intake to perform at It's best, and equalizes the air/fuel between the dual planes for more equal fuel distribution! 😃

We have two left in stock for immediate shipping at this time!!!

Thank you for looking,
Bernard Mondello Racing Enterprises

Photos from Bernard Mondello Racing Enterprises's post 11/30/2021

Hello again,

Our stroker kits are completely SOLD OUT!!! 😀

Thanks to all that purchased them!

Lots of interest, but no one is pulling the trigger! For the strongest and most comprehensive billet stroker 4.500" crankshaft rotating assembly ever... At this price!!!

We still have some left!!!

We only have 3 crankshafts left, to build our AWESOME stroker kits out of... 😪

Our comprehensive complete Billet rotating assembly $5500.00 AS DESCRIBED below!!! LIMITED SUPPLY WHILE THEY LAST!!!

One thing we should address, this rotating assembly is designed for aluminum heads only!

The ultimate in performance and reliability, due to the strength and rigidity of being made from round stock billet 4340 Chromaly... And center counterweighted! 😁

We have S**t billet Oldsmobile 4.500 stroke crankshaft's again in which we can build a complete rotating assembly's in the description and pictures below...

Our ultra premium Oldsmobile 488 or 495 Cubic Inch billet crankshaft rotating assembly... The quality is unsurpassed by any other stroker kit available!

If you're using a Rocket Racing' Badd Ass' Block, custom pistons are available in larger bore sizes 4.250=511, 4.310=525, 4.375=541, 4.400=547 Cubic Inches... @ extra cost $$

Using a S**t billet 4.500 stroke crankshaft, S**t H-beam 7.100" long rods w/ARP 8740 cap screw rod bolts (ARP 2000 bolts extra $ if needed), CP bullet X forging pistons with 1.5mm 1.5mm 3mm ring pack, Clevite H rod and main bearings, BHJ billet SFI harmonic balancer with Oldsmobile 4 bolt pattern and pulley registration, and ATI SFI flexplate fully internally balanced by Bernard Mondello Racing Enterprises...

Please Note: We have no affiliation with Mondello Performance Products Inc...

Please allow 10-12 weeks to build and balance.

Complete. Plus shipping.!

Thank you in advance,
Bernard Mondello Racing Enterprises

11/30/2021

I'll leave this right here..........

Look at the date of availability!

Edelbrock Performer RPM Cylinder Heads 61025 and 61029!
Cylinder Head, for Hydraulic Flat Tappet, or Hydraulic Roller camshaft, 77cc Chamber, 218cc Intake, 128cc Exhaust, Assembled, Stud Type, Aluminum, V8, 400-455 CID, Oldsmobile, Each.

Estimated Ship Date: 1/28/2022

Thank you,
Bernard Mondello Racing Enterprises

11/03/2021

Hello again,

Here is the last 3 S**t 4.500 Billet stroker crankshafts in existence we purchased all remaining crankshafts available!!!

All you need to do is place your order for one of our Premium quality rotating assemblies... Before these are gone!!! 😀

Thank you for looking,
Bernard Mondello Racing Enterprises

Photos from Bernard Mondello Racing Enterprises's post 09/30/2021

Hello again,

Did you know that we're your 45° Oldsmobile camshaft specialists, both hydraulic flat tappet and hydraulic roller camshafts!!!

Camshafts are Made In USA and we only use Made In USA Johnson hydraulic flat tappet lifters!

Shipping out today custom 45° hydraulic flat tappet camshafts, with one example of one cam card for a camshaft being shipped... 😃

Thank you for looking,
Bernard Mondello Racing Enterprises

09/15/2021

The first carbide cut to dramatically improving oil flow through the rear main cap and oil pump!!!

Matched to our fully ported/polished blueprinted oil pump! 🙂

Thank you for looking,
Bernard Mondello Racing Enterprises

Photos from Bernard Mondello Racing Enterprises's post 09/15/2021

Hello again,

We are no longer offering our awesome valve covers...

SOLD... Thank you!

Well, we have only one pair of our AWESOME 'Made In USA' fabricated valve covers left in stock... 😪

When these are gone, they may be gone forever. Having a very hard time getting them in a timely manner, and numerous lies in between!!!

So this last pair will be $545.00 plus shipping.

Thank you for looking
Bernard Mondello Racing Enterprises

Videos (show all)

Hello again, Just a short video of Bernard Mondello Racing Enterprises, doing some valve pocket throat finnish sizing fo...

Telephone

Address


1441 Pomona Road, Ste 16
Corona, CA
92882

Opening Hours

Monday 9:30am - 5pm
Tuesday 9:30am - 5pm
Wednesday 9:30am - 5pm
Thursday 9:30am - 5pm
Friday 9:30am - 5pm

Other Automotive Parts & Accessories in Corona (show all)
Rugged Rocks Off Road Rugged Rocks Off Road
Corona, 92880

Rugged Rocks, Your Source for Nissan Off Road Parts.

Powerstride Battery Powerstride Battery
122 Enterprise Court
Corona, 92882

We are the HOME of Free Shipping! Powerstride Battery wants you to remember to have your battery ch

Wolfsburg West Wolfsburg West
2850 Palisades Drive
Corona, 92880

Wolfsburg West is the ultimate source for Volkswagen Bus and Beetle restoration parts since 1987.

Toyo-Steering Toyo-Steering
159 N Maple Street
Corona, 92880

We are inspired to continually improve the drivability of Toyota vehicles off-road by creating long

Southern Tire Mart Southern Tire Mart
9225 Stellar Court, Suite A
Corona, 92883

Southern Tire Mart is your source for America's favorite quality tire brands. Throughout the United States, we continue the mission we began in 1973: to serve families and business...

Jay Hanes VW Bus Parts and More Jay Hanes VW Bus Parts and More
Corona, 92882

Vw parts

Advance Muffler in corona Advance Muffler in corona
13684 Magnolia Avenue
Corona, 92879

We do welding repair, and we do exhaust work, on any kind of cars and truck and suv. We do FLOWMASTE

West Coast Odyssey Batteries West Coast Odyssey Batteries
410 Le Roy Drive
Corona, 92879

The combination of extreme power and performance makes ODYSSEY batteries perfect for a range of applications, including auto/LTV, marine, commercial, racing and powersports.

Wheel City Wheel City
950 El Sobrante Road
Corona, 92879

Pacific Customs Unlimited Pacific Customs Unlimited
1660 Commerce Street
Corona, 92880

Welcome to the official page of Pacific Customs! Please visit us at www.PacificCustoms.co

Dirt Werks Offroad Dirt Werks Offroad
Corona, 92880

Off road Fabrication, Preparation, Parts, Accessory Sales & Service!

Mark V Products Inc. Mark V Products Inc.
400 El Sobrante Road
Corona, 92879

manufacturer of detailing supplies for auto, marine and aircraft use.