RMBuilds

Bringing out the life in this white oak panel using hard wax oil

Adding cabinet pulls using jig makes for consistent and repeatable installation. I use a scrap board to minimize tear out on the back side of the door

Laying down some SW Emerald UTE with my Titan x120. FFLP 310 tip 🫟

Adding faux shaker style doors to finish off the front of this murphy bed. Still some finishing touches but happy with the progress 🤝

My full process from start to finish for making and installing cabinet doors. Let me know what you think 🤝

Faux shiplap panel above the murphy bed headboard for under $50

Remember kids, table saws can be dangerous. Got a bit too confident making a cut I’ve made many times. It’s time for a larger crosscut sled or l fence ⚒️

Quick and simple cabinet assembly. 3/4” UV Prefinished maple plywood, assembled with narrow crown staples and pocket hole screws. 1/4” back that will hide the fasteners. Faceframe to come ⚒️

My daughter asked me to make her a vanity, so I did. Here’s my process 🫶🏽