E3 Embedded Systems

Our partner Koliada will attend May 14-17 at the Santa Clara Convention Center. Come visit Guy and have him demonstrate KoliadaES running on E3 hardware... you will find him and the E3 mini-stack at the Mesh Candy booth (905).

Another reminder (and not the last) that E3 Embedded Systems and our hardware (PIEP) will be at the 2017 EMBEDDED SYSTEMS CONFERENCE in San Jose, CA (http://escsiliconvalley.com - ). The conference Expo will be Dec. 6 and 7 from 10 - 4. We will be at the Expo with Koliada. Visit us on Wednesday or Thursday at booth 1432 to see Koliada ES and the E3 platform in action.

ESC Silicon Valley Connect with the Future of Embedded Systems

We are very excited to announce that E3 Embedded and our hardware (the Processor Independent Embedded Platform or PIEP) will be at the 2017 EMBEDDED SYSTEMS CONFERENCE in San Jose, CA (http://escsiliconvalley.com - ). The conference Expo will be open December 6 and 7 from 10 AM - 4 PM. Come visit us at booth 1432. We will be at the showcase with Koliada. Koliada has developed an incredible embedded development SDK and they plan to showcase it using PIEP. Come visit us on Wednesday or Thursday at booth 1432 to see Koliada ES and the E3 platform in action.

ESC Silicon Valley Connect with the Future of Embedded Systems

We are happy to announce a Partnership with Koliada. We are combining the PIEP with very unique software, KoliadaES... modular hardware, meet modular software. Read the full article/release - http://bit.ly/PIEPandKoliadaES.

Modular Embedded Hardware meets Modular Software Silicon Valley, CA (PRWEB) February 11, 2015 -- E3 Embedded Systems and Koliada announce plans to port KoliadaES to the Processor Independent Embedded Platform (PIEP).

Despite our Kickstarter failure... many people loved the PIEP. Here are 4 great reviews.
- http://www.themakersworkbench.com/reviews/overview-piep-system-e3-embedded-systems
- http://electronicdesign.com/boards/processor-independent-embedded-platform-supports-modular-development
- http://linuxgizmos.com/instant-diy-controller-project-plans-linux-add-on/
- http://connectedworld.com/e3-embedded-systems-piep-supports-modular-development/

Overview of the PIEP system from E3 Embedded Systems | The Makers Workbench Over the last decade I have owned most of the popular embedded electronics development boards. These boards ranged from Parallax Propeller based to Microchip’s popular PIC lineup, and everything in-between including more than a few dozen Atmel AVR based Arduino boards. While Arduino and the Raspberr…

We have heavy hearts & bruised egos. We did not make it on Kickstarter - BUT WE ARE NOT GIVING UP. We will find a way!

More news... Our Kickstarter campaign now has an AVR Basic Kit that includes the 4x4 motherboard, An AVR (ATMegaX) Processor board and three peripherals - USB, Breakout and Switch/LED Boards. http://bit.ly/piepkickstarter

Processor Independent Embedded Platform (PIEP) E3's easy-to-use PIEP will help engineers, enthusiasts and educators save time and money on their embedded development solutions.

This is it! The PIEP is LIVE on Kickstarter. Help fund this revolutionary embedded development platform - www.e3embedded.com/kickstarter
, ,

Processor Independent Embedded Platform (PIEP) Help Fund the Processor Independent Embedded Platform on Kickstarter

We just got picked up in Electronics Weekly - Check out the article's title!

Is this the best dev kit you're ever seen? | Electronics Weekly Are you collecting dev boards with every new microcontroller seeming to require its own dev board? Do you wish you could find a development board which can

The word is spreading. Bill Wong with electronicdesign.com also published an article about E3 and the PIEP (that's huge). Thousands of people follow Bill and some of them are already creating their own posts based on his. Thanks Bill and Electronic Design!

Processor Independent Embedded Platform Supports Modular Development Ok. You have an embedded project in mind. Enhancements come to mind so the peripheral complement is likely to change. The problem with the last project was the development board had limited peripheral interface hardware and it was hard to add it. There were cables all over the place. It would be nic…

Brace Yourselves... we completely agree. Charles Gantt (blogger/maker extraordinaire) recently posted a great 'teaser' article on The Makers Workbench and on his community blog on element14. You can view the posts here:
http://bit.ly/1rowP5z - or - http://bit.ly/1nNjKzk
He is planning a more in-depth review the day our KickStarter launches (FRIDAY). Thanks Charles for the kind words and your vote of confidence!

Brace Yourselves, Processor Independence Is Coming! | The Makers Workbench As the old adage goes, every Electronic Engineer is a maker, but not all makers are Electronic Engineers. Because of this fact, many Makers tend to adopt a single development board and tool chain as it is just too expensive to be able to afford a completely different setup for each and every process…

Today we attended a session at The Clubhouse for Startup Day Across America. Congressman Barrow attended and E3 presented, along with 5 or 6 other startups. After the presentations, we had a round-table (minus the table) with Congressman Barrow.

More on SDAA - http://thehill.com/opinion/op-ed/211632-introducing-startup-day-across-america

theclubhou.se - Coworking, Collaboration, Technology - Augusta Georgia 06/25/14Designing Augusta’s Technology FutureThe Georgia Municipal Association and The Georgia Institute of Technology’s College of Architecture recently profiled theClubhou.se and it’s impacts on designing Augusta’s future through the development of Technology as a cultural institution in a short f…