PSTech

PSTech is looking for prospective candidates for Senior ITS Engineer - TELECOMMUNICATION (PWA ASHGHAL)
Interested candidates may apply at:
https://forms.gle/xkASYHoxEgV1Vpyp7
ONLY QUALIFIED CANDIDATES will be contacted.

WE ARE HIRING -To apply: Send your recently updated Curriculum vitae to [email protected] / Or log on to the following website: - https://pstechqatar.com/ or send your CV to WhatsApp https://wa.link/sjtpvc
1- Electrical Engineer for Operation, Switching, and Maintenance (MV 11KV)

• A graduate in Electrical Engineering with at least 7 yrs. Relevant Experience Electricity Distribution Network.
• Must have at least 5 years of experience in Switching on Live MV (11kv) Equipment.
• Must have knowledge of relevant IEC standards and IEEE guidelines.
• Shall have in-depth knowledge of power cables, cable accessories, Distribution Substation Components- Switchgear, Transformer, feeder pillar, etc., OHL Components – PMT, Auto recluses, AB switches, etc...
• Basic Knowledge and Experience working in Auto Cad and other design software
• Perform the 11kv cable fault location/isolations/restorations required for circuits/equipment according to the switching program with the consent of the control engineer.
• Carry out Analysis of MV and LV joint failures, Dist. Transformer failure, Switchgear Failure, or any component failure in Electricity Dist. Network at site/ Abu Hamour workshop and submit a report

2- Electrical Inspector (11KV Substation Maintenance, OHL. Maintenance, and Cable maintenance).
• Diploma / Graduate in Electrical Engineering (full-time course) with at least 5yrs. Relevant Experience with an Electrical distribution system.
• Must have experience in installation, operation, and Maintenance of MV and LV switchgear, Cables, transformers, feeder pillars, and OHL. Testing & commissioning of MV / LV Equipment & cables and OHL
• Must have handled projects for the Ex*****on of MV and LV cable lying and should have in-depth knowledge of the Ex*****on of such Projects, Experience in Planning, and scheduling of Substation Maintenance and OHL Maintenance.
• Become familiar with the Road opening application and approval system adopted by Ashghal and KAHRAMAA.
• Supervise the Maintenance work at the site to ensure work has been executed as per KAHRAMAA standards and procedures
• Supervise the installation of cables, joints, and terminations and ensure work has been done as per the installation manual and KAHRAMAA guidelines and procedures
• Should have a valid Qatar driving license with own 4-wheel drive Car/pickup,

3-Electrical Technician for Diesel Generator Maintenance.
• Diploma / Graduate in Electrical Engineering (full-time course) with at least 5yrs. Relevant Experience with Electrical distribution systems / Generator sets.
• Must have knowledge and experience in the installation, operation, and Maintenance of engines, alternators, and control systems of Gensets.
• Must have knowledge and experience in installing, maintaining, and repairing Alternators, start control systems, wiring, and lighting systems.
• Must have knowledge and experience in Overhauling Alternators and other electrical equipment.
• Read technical diagrams and blueprints.

4- Mechanical Technician for Diesel Generator Maintenance
• Diploma / Graduate in Mechanical Engineering (full-time course) with at least 5yrs. Relevant Experience with Generator sets and Electrical distribution system
• Must have knowledge and experience in the installation, operation, and Maintenance of Diesel/ Petrol engines including electrical parts and components.
• Must have knowledge and experience in Overhauling of various types & Capacities of Engines and
other components, Inspect Generator parameters and other electrical components.
• Read technical diagrams and blueprints.
•. Troubleshoot/Diagnose electrical issues in Gen sets using appropriate testing devices

5- Condition Monitoring Technician 11KV Substation.
• Diploma in Electrical Engineering
• 3 years of Hands-on Condition Monitoring experience with various types of Medium Voltage (up to 33kV) and Low Voltage (415V) Electrical equipment (Indoor Switchgear, RMUs, Transformers, and Cables) preferably in Electrical utility.
• Partial Discharge measurement for MV Switchgear and Transformers.
• Infrared Thermography of Switchgears, transformers, and Feeder Pillars
• Basic IT knowledge with proficiency in computer applications MS Office and MS Excel.
• Fluent in written and spoken English, Knowledge of written and spoken Arabic will be an advantage.
• To use the following instruments during condition monitoring:
• Ultra TEV plus, Ultra TEV Locator, and Ultra TEV Monitor
• HVPD PDS Air
• IPEC PD-SGS and IPEC PD-SG1
• ULD-40
• IR Cameras
• Valid Qatar Driving License will be an advantage

6- Maintenance Planner (11KV Substation, OHL, and Cable ).
• Diploma in Electrical Engineering
• 5 years of Hands-on work experience with various types of Medium Voltage (up to 33kV) and Low Voltage (415V) Electrical equipment (Indoor Switchgear, RMUs, Transformers, OHL, and Cables) preferably in Electrical utility. Experience in Maintenance, Maintenance Planning, Er****on, Testing, and Commissioning of MV & LV Electrical equipment is preferred.
• Good IT knowledge
• Should have a proficiency certificate in computer applications MS Office and a higher level of proficiency certificate in MS Excel. Should have knowledge in working with ERP applications and commonly used other maintenance helping tools (such as Arc FM, Auto CAD, etc.)
• Prepare monthly, quarterly, and annual presentations in MS PowerPoint.
• Update the Maintenance Plan on a daily/weekly basis and track the progress and variance of actual work vis-à-vis planned work
• Fluent in written and spoken English.

WE ARE HIRING -To apply: Send your recently updated Curriculum vitae to [email protected] / Or log on to the following website: - https://pstechqatar.com/ or send your CV to WhatsApp https://wa.link/sjtpvc
01- Protection Engineers (04 Nos)
Qualification: Bachelor’s Degree in Electrical / Electronic Engineering from a reputed
University.
Experience:
• Work experience in a live system is mandatory
• Minimum 8 years' experience in Protection of in HV, Distribution systems 11 KV live system maintenance with similar utility /Live system.
• Experience in testing of Electromechanical / Static / Numerical Relays, Testing of CT/VTs, Numerical relay configuration, Relay firmware, setting, testing, Pilot differential/Fiber optic Differential Protection commissioning, Directional Over Current/Directional Earth Fault Protection commissioning, troubleshooting of Protection and controls system, Grading, SCADA & GOOSE.
• Candidate shall have good proficiency in English – to Speak, Read & Write.

02) Protection Technician (10 Nos):
Qualification:
• Diploma / Degree in Electrical / Electronic Engineering
Experience:
• Engineering Diploma holder with Minimum 5 Years of Protection experience or Engineering Degree holder with Minimum 2 years of experience, in Protection of in HV Live system, 11 KV Distribution systems with similar utility.
• Candidate should be well familiar with Numerical/static/Electromechanical relay settings,
• testing etc.
• Candidate shall have good proficiency in English – to Speak, Read & Write

03) Cable Technicians (3Nos)
Qualification:
• 3 years Diploma or bachelor’s degree in electrical /Electronic engineering from a reputed university.
• Technical course certificate (ITI) in the electrical trade or equivalent with more than 12 years of experience also can be considered.
Experience:
• Minimum 5 years’ experience in Cable fault identification of MV, and LV Distribution systems.
• The experience in cable system fault identification with similar utility /Live system
• Technician to have experience in fault location & identification of Pilot cable.
• The experience required in Pilot/LV cable identification, Locating the buried cable, locating faulty cable point & Joint and Cable ends, and repairing faulty cable joints.
• Work experience in a live system is mandatory.
• Candidate shall have good proficiency in English – to Speak, Read & Write

04) Battery Charger Technician (03Nos).
Qualification:
• 3 years Diploma or bachelor’s degree in electrical / Electronic engineering from a reputed university.
• Candidates with a technical course certificate (ITI) in the electrical trade or equivalent with more than 12 years of relevant experience can also be considered.
Experience:
• Minimum 5 years' experience in Battery Charger / UPS system in Electricity Utilities / OEMs.
• Candidate should be familiar with the rectification of battery charge issues, attending faults, Preventive & corrective Maintenance, etc.
• Experienced in repairing electronic components/equipment such as Battery charger units, UPS, rectifiers, inverters, Filters circuits, testing instruments, etc.
• Candidate shall have good proficiency in English – to Speak, Read & Write

05) Assistant Technicians (17 Nos)
Qualification:
• Technical course certificate (I T I) or Diploma in Electrical/Electronics.
Experience:
• Minimum 2 years of experience in Industrial wiring, Electrical maintenance, repairing electrical appliances & Machines, etc.
• Preference will be provided for those with experience in testing relays & meters, Cable termination & jointing, and maintenance of battery charger units.

06) Fitter (01)
Qualification:
• Technical course certificate (I T I) / Diploma in Electrical/Mechanical.
• Candidates with a Secondary School Certificate or equivalent with more than 12 years of relevant experience can also be considered.
Experience:
• Minimum 5 yrs. experience in MV switchgear-related fitting/cutting works, preparing sheet metal frames & Metallic boxes.
• Familiar with making necessary cut-outs on the LV compartment of indoor switchgear and fixing marshaling boxes.
• Candidate shall have good proficiency in English – to Speak, Read & Write

Calibration Lab Manager
Qualification
An engineering Degree preferably in Instrumentation, Mechatronics, or electronics.
Experience
A minimum of 7 years of experience in an accredited calibration laboratory to the standard ISO 17025.
The accredited scope of the laboratory should cover the parameters Force, Pressure, Temperature, Dimensional, Electrical, Mass, etc.
Experience in planning and implementing business development/ sales strategies.
Experience in customer relationship management.

To apply for the job, use the following link
http://www.pstechqatar.com/jobs/detail/16999

Calibration Technician
Qualification
Diploma in Engineering, preferably Mechanical or Electrical or Electronics or Equivalent.
Experience
Minimum of 5 years of Experience in calibrating several different disciplines of test & measurement equipment such as Electrical, temperature, pressure, and electronics, etc.

To apply for the job, use the following link
http://www.pstechqatar.com/jobs/detail/17000

Minimum requirement:

10 years experience in relevant field (Roads / Highways / Infrastructure)

Ashghal Project experience is preferable.

3 Years Experience in Gulf

Skillset on CAD tools / mapping tools / Good problem-solving skills

GIS and CAD interoperability Knowledge

Minimum requirement:

5 years experience in Land Survey (Roads / Highways / Infrastructure)

Ashghal Project experience is preferable.

2 Years Experience in Gulf

Skillset on AutoCAD 2010 / Microsoft Software Products.

Qatar Driving license (Must)