YOGIYA

You need this 3D printed adapter if you want to precisely position the brifters on your handlebar using the derailleur hanger tool.

I designed this simple adapter in order to bring the offset back to the center of the derailleur hanger tool. No sweat!

Compatible only with Park Tool and Toopre brands.

Must watch! I recently serviced a gravel bike (The Project Gravel Grinder) owned by Mr. Rey Teves. Most of the components on his bike are low-key expensive. Some of these are Chris King headset, PAUL seat collar, brake levers and skewers, Nitto handlebar and seat post, Brooks saddle, Sugino cranks and bottom bracket. This means, I have to be extra careful.

Bike Service Summary:
✔️ Polished brass bell, end caps and column spacers
✔️ Removed dried tire sealant from the frame
✔️ Removed rust from bolts, nuts and chain
✔️ Removed rust from seat tube and bottom bracket shell
✔️ Deep clean group set components using ultrasonic cleaner
✔️ Replaced square tapered bottom bracket bearings
✔️ Wash and dry small parts and accessories
✔️ Waxed and polished frameset
✔️ Thread-chase bottom bracket shell
✔️ Set saddle and brake lever angles to user default setting
✔️ Applied proper grease on threads and sliding parts
✔️ Torqued bolts to spec

This is Lex's AC-2 by MASH, a bike brand that is drooled over by a lot of people in the fixed gear community. Outfitted with high quality components that will surely enhance the riding experience.

I'm grateful for his trust and the opportunity to build his "Dream Fixed Gear" bike here in my workshop.

If you enjoy this video, consider sharing it to your friends.

Must watch! This fixed gear bike looked like new again! For more bike services, book an appointment online. It’s FREE, no sign-up needed.

The bike was sent to us for a full service. We have to clean up the rust that covered the chain, nuts and bolts. We also had to scrape off the sticky residue from the old bike skin. So, here’s the full video where we're proud to share with you the result.

Bike Service Summary:
✔️ Repaired uneven cut of the steerer tube
✔️ Replaced old fork star nut
✔️ Removed rust on bolts, nuts, chain, cogs and lockring
✔️ Deep clean chain with ultrasonic cleaner
✔️ Checked headset bearing size for replacement
✔️ Replaced square tapered bottom bracket bearings
✔️ Deanodized and polished small parts
✔️ Replaced front hub bearings
✔️ Removed sticker residue from the old bike skin
✔️ Waxed and polished frameset
✔️ Thread chase bottom bracket shell
✔️ Torqued bolts to spec