Email: [email protected]
Pulse Performance was founded in August 2007
We are a dedicated team that has a magnitude of experience that ranges from drag to circuit racing, drift & rallying all at an international winning level.
Our staff are all fully trained & are all racers ourselves so we understand your needs. While we are well known for the supply of high horsepower & extreme mazda rotary engine packages, we also have extensive experience with all aspects of tuning race engines. We have a large purpose built workshop facility that accommodates a full fabrication division, dyno tuning cell, race bay, hoist bay, engin
Operating as usual
Any guesses on what this immaculate series 8 rx7 has been dropped off for ?😁 it even has the sales brochures in the glove box!
More amazing projects underway, looking forward to seeing the finished results👌🏼
Another new naturally aspirated big port quad heading over to Aus, one more down still more to come!
In amongst all our larger projects we are still pushing through a few standard rebuilds. Heres another tidy original rx7 ready more years of enjoyment 👌🏼
New 13bpp package ready to head across the ditch. This will be fitted into equally beautiful rx2👌🏼
We have supplied this complete with a new custom engine harness, ecu and fuel system components ready to turn key (almost..)
Engine side is fitted with our fabricated alloy sump and intake manifold, pro series billet tapered bore throttle body’s, high flow rams and long list of internal mods to make this motor sing as it should!
Hi team! Apologies for the lack of updates, we have been absolutely cranking busy and finding it difficult to find spare time to post some of our current work!
That being said, here’s another recent project fresh off the dyno this week and almost complete. We seem to be often tasked with fitting these big rotary blocks into small cars!😆
This little 323 is now running one of our complete pp ported quad packages in combination with a new face plated tkx liberty gearbox. We have spent many hours meticulously fitting and fabricating custom parts to make this all fit! Very happy with the results, sounds beautiful, very broad power curve and super smooth even on lighter throttle loads.
We will add a further post with some more detail on this soon!
Three rotor rx2 project well underway, new sump, intake, engine mounts, tunnel work and stainless exhaust manifold all complete👌🏼
Nice semi billet turbo quad soon to hit the streets of Japan 🇯🇵 😬
Last stop for the little mx5! Firstly configuring the ecu and dash display settings, post start checks and then into initial dyno tuning. The engine setup produces great response and good mid range power with the little Garrett g35-900, adjustable boost settings between 300-450whp making it easier for @lincoln_whiddett to dial in on track👌🏼
NOKIDN Part 2
Fitting up the new @pwrperformanceproducts coolers, these were made to our dimensions and specs making fitment easy.✅
@radiumengineering fuel system components,catch can and @nzkw_easttamaki plumbing fitted ✅
More in house fabrication, intercooler/radiator plumbing’, transition elbow, brackets, heat shields etc✅
Wire and install the new @halttechecu and all related sensors and auxiliaries✅
Fit new @elite_rotary_shop intake and fuel rails✅
Here’s another recent project we have be working on for the team at Madmike Motorsport, @lincoln_whiddett mx5 (NOKIDN) getting a nice re-power with more displacement and boost! Out with the old 12a Bridgeport and in with a nice 13b turbo setup👌🏼
Modify sump, fabricate engine mounts and position motor ✅
Fabricate turbo manifold and complete new exhaust system✅
Detail @tcpmagic engine block and fit new @directclutch ✅
Fit new @hgtprecision 5speed sequential gearbox, shifter and fabricate new mounts ✅
Fit new carbon @driveshaftshop driveshaft✅
Guys in the engine room have been extremely busy along with the rest of our team. Two more 13b turbo builds ready for install, it all starts in here🔧
Haltech Black Friday Specials!! With every ecu purchased through us we will add a further 10% discount on install and dyno tuning ( bookings currently from March 2022)
Sale ends midnight Monday 29th November
Andrew rx7 in for a check over and some air con repairs ready for summer. We built and tuned this many years back, great seeing it still looking and performing well👌🏼
Just how the rx8 should have come from the factory. Here’s another one of our rx8 rew turbo conversions complete, Drives like a standard car with big performance increase and reliability👌🏼. We will be taking orders on more of these March 2022
Details at https://pulseperformance.co.nz/
Custom paint and detailing on this 13b has given this motor a huge transformation from the box of parts we had to start with! Internally it is just as nice with modified high comp rotors, lightened rotating assembly and our large stage three bridge porting 🔥
Black beauty! This is one of six big block builds we have underway currently. This will be fitted into a street registered fd rx7 along with a sequential gearbox and many other @p.p.r.e custom parts, much more to come.👌🏼
10% OFF ALL TURBOSMART PRODUCT THIS WEEK ONLY @p.p.r.e !
Please email [email protected] for orders
Radcliffe’s extreme 20b powered Mazda b2000, taking modifications to the next level! We have just completed a full rewire with a new @link_ecu and initial tuning. Radcliffe has spent countless hours on this and attention to detail is a testament to his stainless fab skills 💯 👌🏼
Some shiny @hgtprecision gearboxes waiting to be installed into some rather extensive projects we have on. Much more to come 🔧
New side exit exhaust for BADBUL, bit of a upgrade from the old under car dumper, will help keep the passengers eyes from watering🥲
Nice injected 12a ready for one of our friendly customers, for whatever reason all the 12a builds seem to come at once😆
This gives you some idea on the amount of carbon build up we see on an average rx8 rebuild, many hours go into carefully cleaning and preparing each part before assembly.
Dan’s 12a rx7 was in need of a little attention and is now ready for more years of enjoyment, This one has received a engine rebuild, tuning and general tidy up🔧
These older cars are becoming a real investment, so if you need a little help with your own car our team is more than happy to help.
For those who wanted to see the little charged Mazda 1600 in action, how good 💯
Another recent project, Bruce’s tidy little mk2 Ford Es**rt in for a zetec engine conversion complete with side draft Webber’s and a Link g4x in control of the ignition side.
Beautiful little car, certainly fuels our passion working on nice little projects like this💯
One of many projects we have underway 🔧
Luke’s 1600 previously had a 13b turbo package that we had built and tuned, a few years on it was time to change things up a little! Now fitted with a 471 blower, our own custom water to air interooled intake, dual tb’s, ppre block and e85 it’s sure to turn some heads 👌🏼 How good does it look!
Turbo Ls commodores are becoming more popular, here’s a twin turbo setup we recently completed using a modified kit and Haltech ecu. Not much spare room in there to say the least.
Our team has been busy developing a new rx8 turbo conversion kit, this is a ideal option for customers that have a rx8 requiring a rebuild. details on our website. https://pulseperformance.co.nz/shop/engine-packages/ppre-rx8-turbo-conversion/
Over the last few months our team has been getting stuck in giving @madmike.123 trusty badbul a good going over, most of the old parts on this car had remained in use for many years and with overseas events being put to a hault we were able to spend some serious time rebuilding most of the engine bay. @pwrperformanceproducts supplied some nice new coolers made to our drawings, @aeroflowperformance have supplied all the plumbing, brand new @garrettmotion g series turbo and a new @haltech nexus ecu to keep everything in check! All fabrication, wiring, tuning and everything else in between all completed by our team 💯👌🏽
One of many bridge ported renesis engines we have built this year, this particular rx8 being controlled via a Adaptronic modular plug in ecu, these ecus are a great option for any ported, turbocharged or engine swapped rx8.
We have also worked on some development with the guys @adaptronic for the 4 and 6 port jdm model rx8 we have here in Nz👍🏼
One of our Four rotor engine packages looking right at home in this rx7. This being another first for Indonesia 🇮🇩
Photos from P.P.R.E Pulse Performance Race Engineering (OFFICIAL)'s post
Another fc rx7 with a touch of p.p.r.e revival after sitting for many years. We have spent many hours fabricating custom parts for this, giving a very clean and functional result. New ppre built 13bbt, exhaust manifold, low mount power steering bracket, full custom radiator/cooling system, intercooler plumbing and more all completed, wired and tuned by our team.
|Monday||8am - 5pm|
|Tuesday||8am - 5pm|
|Wednesday||8am - 5pm|
|Thursday||8am - 5pm|
|Friday||8am - 5pm|
Here at Nationwide Diesel Services, we offer full onsite servicing and repairs. From breakdowns, to
Contact CCAB for all your refinishing repairs Panel & Paint * Valet services * Detailing * Window tinting * Car audio * Mag wheel repairs.
2 mates mucking about in a shed trying to live the drifting dream
Hymech is a locally owned business. We are your one stop shop for all, Hose and fittings, hydraulics, pneumatics,engineering and much more.
Andrew Johnson Electronics is proud to supply Electronics services to the wider Whanganui area. We
We paint anything from automotive to industrial. We also sell panel and paint Supplies Stop in