Scuba Service Tools

Hollis 6-pin environmental seal cap socket

This 6-pin 3/8"socket is used to open and close the environmental seal cap on the Hollis first stage.

https://www.scubaservicetools.com/product-page/hollis-6-pin-environmental-seal-cap-socket?currency=EUR

Apeks seal cap socket for MTX-R and DB-4

The Environmental seal cap socket for the Apeks MTX-R and DB4 first-stage is used to remove and install the environmental seal cap (Apeks part # AP2010) on top of the Apeks MTX-R and the Apeks DB-4 first stage.

The tool incorporates a 1/2" Ratchet drive so it can be removed and closed with a torque or a socket wrench.

https://www.scubaservicetools.com/product-page/apeks-environmental-seal-cap-socket-for-mtx-r-and-db-4

Desk mounted Resort Test bench

Introducing our desk-mounted Resort test bench, perfect for scuba testing and service equipment. This test bench comes equipped with a big intermediate pressure gauge and a Magnehelic Meter, all neatly housed in a versatile mounting base. Made of durable black powder-coated 304 stainless steel, this test bench is built to last and withstand the rigors of daily use in a scuba service shop.

https://www.scubaservicetools.com/product-page/desk-mounted-resort-test-bench?currency=

Scubapro Mk11 diaphragm retainer torque C-spanner tool

This tool is used to tighten the retainer of the Mk11 first-stage regulator to the specified torque of 35 Nm.

https://www.scubaservicetools.com/product-page/scubapro-mk11-diaphragm-retainer-torque-c-spanner-tool

Poseidon Jetstream and Xstream leak testing tool

The Poseidon Jetstream and Xstream leak testing tool enables an LP valve housing assembly to be easily pressurised and checked for leaks in a water bath outside the regulator body.

https://www.scubaservicetools.com/product-page/poseidon-jetstream-and-xstream-leak-testing-tool?currency=

Aqualung cover ring tool set

This Aqualung cover ring tool set is a nice collection of 4 Aqualung second-stage cover tools.

This kit contains:
Second-stage cover ring tools for the Aqualung Core
Aqualung ABS octopus
Aqualung Mikron
Aqualung Legend I and Titan LX.

https://www.scubaservicetools.com/product-page/aqualung-cover-ring-toolset?currency=

Apeks drysuit tool-set

This Apeks drysuit tools set consists of a collection of all Apeks drysuit tools needed to service the dump valve and the front and back of your drysuit inflator.

https://www.scubaservicetools.com/product-page/apeks-drysuit-tools-set?currency=

Pressure tester for dive computers

Dive computers and small dive lights can be tested safely with the Scuba Service Tools pressure tester, without damaging your customers' expensive equipment.

https://www.scubaservicetools.com/product-page/pressure-tester-for-dive-computers

Scuba test bench - Resort version with big IP gauge

This scuba test bench with big IP gauge, lives up to its name, it does not require a connected air source and can therefore be used anywhere for the regulator service.



https://www.scubaservicetools.com/product-page/scuba-test-bench-resort-version-with-big-ip-gauge

Apeks Black Sapphire environmental end cap tool

The environmental seal cap socket for the Apeks Black Sapphire first stage is used to install and remove the faceted environmental end cap.



https://www.scubaservicetools.com/product-page/apeks-black-sapphire-environmental-end-cap-tool

Scubapro Hydros bcd color kit tool

The Scubapro Hydros bcd color kit tool attaches the grommet and nut (Scubapro part number: 21.782.005) of the Scubapro Hydros color kits.

The 3 hardened stainless steel pins fit into the small holes of the Hydros Pro BCD grommet nut by turning the other side the parts are tightened.

https://www.scubaservicetools.com/product-page/scubapro-hydros-bcd-color-kit-tool

Scubapro C-series cover tool set

A collection of all Scubapro C-series cover tools.

This kit contains:
Scubapro C370 / C350 cover tool
Scubapro C200 / C300 cover tool

https://www.scubaservicetools.com/product-page/scubapro-c-series-cover-tool-set