IIME ISM Student Chapter
Share
Welcome to the IIME ISM Student Chapter. IIME ISM Student Chapter in ISM was established on 11/11/2008.
From its inception IIME has been organizing different events, quizzes, guest lectures and playing important role to interact with industries.
Single-stage recovery and concentration of mineral sands using a REFLUX™ Classifier The REFLUX™ Classifier is a gravity separation device that consists of a system of inclined channels located above a fluidized bed. Here we report for the first time the results obtained processing a minerals sands feed using narrow 6 mm channels that promote a laminar-shear separation mechanism tha...
04/05/2016
Govt identifies blocks for exploration of gold, diamond - Times of India New Delhi, May 4 () The Mines Ministry has identified over 100 blocks for reconnaissance stage exploration of minerals such as gold, diamond, bauxite, iron ore and limestone, Parliament was informed today.
04/05/2016
Coal India Cuts Output 1st Time in More Than Year Amid Glut Coal India Ltd., the world’s biggest miner, saw production and shipments of the fuel fall year-on-year for the first time in 15 months as sluggish demand caused stockpiles to swell.
Indian School of Mines (ISM) University, Dhanbad How does Indian School of Mines (ISM) University, Dhanbad compare to other schools? Read the TopUniversities profile to get information on rankings, tuition fees and more.
23/02/2016
Coal Preparation, Principle And Practice training session organised by Dept. of Fuel and Mineral Engineering for Coal India Executives.
ISM planning to install 'Virtual Reality Simulator' .This will be imported from Australia and with this ISM will become the only institute in India to have such Technology.
10/01/2016
In this climate of uncertainity and unease mineral industry must adopt an innovative solution to the impending crisis and for this, Technology will play a big role. With this aim 'The International Conference on Mineral Processing Technology 2016' was organized and it has been a huge success in deliberating on various issues of the industry.
27/12/2015
IIME ISM Student Chapter and Mineral Engineering Society (MLES) jointly presents :
T- shirt design competition for Mineral Engineering
Rules :
1.Design the T shirt bearing the department name as Department of Fuel and Mineral Engineering.
2.Send your design in pdf or jpg format of size not more than 5 MB
3.After submission,the winning design will become the property of IIME, MLES for printing or other purposes
4.Send design to Email :[email protected]
5.The logo of IIME ISM Student chapter should be included as such
6.Last date of submission :5 jan 2016
04/11/2015
Mr. Chris Elstoft (Dy. high commissioner Australia) and Mr. Bruce Murphy (councellor, AHC, New Delhi) visited Dept. of Fuel and Mineral engg. to discuss possibilities of Clean Coal Technology.This was in response to the agreement done between Prime Minister Narendra Modi and Mr. Tony Abott (Former Prime Minister of Australia) during his Australia Visit.
10/10/2015
Mr. Jaideep Shekhar (Director, Terex Finlay) also our Alumni (1999 batch ) was invited by IIME ISM Student Chapter for an interactive session. We are obliged to have a really fruitful talk with him.
08/09/2015
Typical flow sheet designs for Iron Ore beneficiation of hard rock and friable ores.
High grade concentrates and high recovery of iron ore can be achieved using effective feed preparation systems (typically controlled crushing, screening, milling, classification and slimes removal) in combination with cost effective, efficient metallurgical separation.
Hard rock hematite deposits often require a combination of milling, screening and on occasion, fine classification to prepare a finely sized (-1.0mm), liberated feed for beneficiation by gravity separation. This is typically followed by re-grinding of the tailings to liberate more hematite for further iron unit recovery by magnetic separation.
WHIMS are also often employed to recover fine hematite from spiral circuit tailings. The inclusion of medium intensity magnetic drum separation (MIMS) in combination with jigging may be considered for the beneficiation of the 6-1mm fraction of some friable ore bodies.
The following diagram demonstrates some typical flowsheet designs for Iron Ore beneficiation of hard rock and friable ores.
08/09/2015
Prof. Nikkam Suresh Introduced IIME to 1st year,2nd year and 3rd year..7th sept.
06/09/2015
Teacher's Day 2015 Celebration.
5th sept. 2015, Teachers day celebration at FME
Click here to claim your Sponsored Listing.
Category
Address
Dhanbad
826004