Conex Bänninger Scandinavia

This is how building owners imagine planners, architects and engineers working together. But the reality is quite different. Large construction sites in particular require the most precise planning.

Fortunately, there is BIM (Building Information Modeling) - because that is where networked planning takes place, in which the building is represented as a virtual 3D model and all those involved, such as architects, specialist planners, the client or subcontractors, have access to all the information they need.

In order to also integrate our fittings into these building models, they are included in BIMobject and available on our homepage at: https://fal.cn/3warq

Stainless steel stands for the highest hygienic standards. There are two profiles of press fittings for pressing. This is the M- or the B-profile. We offer both for stainless steel. So the question is: >B< Press or Press?

Free choice of profile for the installer! Because with very good corrosion resistance thanks to stainless steel, we leave the decision to the installer.

More at https://fal.cn/3w7cu and https://fal.cn/3w7cv

K65 is the perfect solution if the environmentally friendly refrigerant CO2 is used. Designed for particularly high operating pressures up to 130 bar.

K65 impresses with its low weight combined with very high mechanical strength and good corrosion resistance.

You can find more information on K65 here 👆 https://fal.cn/3w3bt

When emergencies arise, you want to make time for your customers. But what if you are completely busy and have no more free appointments?
We have a solution that makes it easier, faster and more efficient!

The >B< Push series is particularly recommended for repairs. The universal push-fit fitting made of low-lead brass (Pb < 0.2%) can connect pipes of very different materials: Copper, carbon steel, Alupex and PEX pipes. The tool-free joining and full rotatability facilitate installation in confined construction situations.

You can find more Information here: https://fal.cn/3uUtF

Every day we want to save time and become more efficient. For example, nowadays we wouldn't even think of going without the dishwasher and wash by hand again.
It is going to be the same with installations in the air-conditioning and refrigeration industry.

In the past, everything had do be done by brazing, which not only costs more time but is also inconvenient. Open flames involve a risk of fire and no one likes to carry heavy gas bottles.

Join the - with >B< MaxiPro!

More information at https://fal.cn/3uQVl

The classic among pipe connections in the HVAC industry.
Fast, faster, >B< Press.

Available in various metallic materials. Suitable for a wide range of applications, the comprehensive series creates flexible planning and saves ressources.

Further advantages:
- Sustainable materials
- Fast and safe processing
- Flame-free working

More about press technology: https://fal.cn/3uOn2

Wishing everyone a Happy New Year! 🎇

We would like to thank you for a successful, yet turbulent year 2022. We look forward to new projects and the opportunity to support our installers in their everyday lives as service partners.

Merry Christmas from Conex Bänninger.

The cold season has hit us after a very mild autumn. Even more important that heaters can be turned up and the cosy warmth comes in. But what if the heater is not working?

For quick repairs, we recommend >B< Oyster. The fastest pipe to thread connection.

It´s a very quick and easy way to create a pipe fitting connection. How? -> https://fal.cn/3utWJ

Conex Bänninger - the leading fitting manufacturer in the air-conditioning and refrigeration industry presents the press system for refrigeration applications.

Join the with >B< MaxiPro. Up to 48 bar operating pressure.

- Saves time and money
- Flame-free connection
- No inert gas purge
- No hot works permit
- Simple 1-man operation
- Permanently tight in a few seconds
- Available in metric and imperial dimensions

You can find more information here: https://fal.cn/3um06

The energy revolution in the Nordic countries continues to gain momentum. New heat pumps get installed every day. Away from fossil fuels is the mandate of the politicians.

But in order for all these heat pumps to be connected, a simple, safe solution is needed. The answer is >B< MaxiPro. Through permanently tight connections in seconds and consistent quality with the pressing technique.

Faster. Safer. Simpler. Just Conex Bänninger.

You can find more information here: https://fal.cn/3uiqD

In the Nordic countries, fresh drinking water from the tap can be drunk with no hesitation almost without exception. The quality of drinking water is very high. Nevertheless, stagnated drinking water should not necessarily be used for drinking. The "finger test" is often used to test if the water is fresh or stagnated. Fresh water is much cooler to the touch.

Conex Bänninger offers various solutions in both copper and stainless steel for high hygienic demands and good corrosion resistance. Find out more at https://fal.cn/3uaNh

K65 is the perfect solution if the environmentally friendly refrigerant CO2 is used. Designed for particularly high operating pressures up to 130 bar.
K65 impresses with its low weight combined with very high mechanical strength and good corrosion resistance.

You can find more information on K65 here 👆 https://fal.cn/3u6Ra

Practical solutions are always required, especially in case of repair.
It can't get any simpler than our >B< Push fittings. Truly the fastest connection on the market. And for different pipes - copper, carbon steel, Aluplex and PEX pipes.
Simply connect every pipe with a fitting - no tools needed.

You can find out more about our push-fit fittings here: https://fal.cn/3tYcV

The fitting to support ecological change.
In the Nordic countries, new heat pumps are being connected every day. Away from fossil fuels is the mandate of politicians.
But in order for all these heat pumps to be connected, more well-trained people are needed. The faster, simpler and safer solution to this lack of skilled personnel is >B< MaxiPro. Through permanently tight connections in seconds and consistent quality with the pressing technique.

Faster. Safer. Simpler. Just Conex Bänninger.

More information? https://fal.cn/3tM4f

Every day we want to save time and become more efficient. For example, nowadays we wouldn't even think of going without the dishwasher and wash by hand again.
It is going to be the same with installations in the air-conditioning and refrigeration industry.

In the past, everything had do be done by brazing, which not only costs more time but is also inconvenient. Open flames involve a risk of fire and no one likes to carry heavy gas bottles.

Join the - with >B< MaxiPro!
More information at https://fal.cn/3tI48

In the European and Nordic countries, fresh drinking water from the tap can be drunk with no hesitation almost without exception. The quality of drinking water is very high. Nevertheless, stagnated drinking water should not necessarily be used for drinking. The "finger test" is often used to test if the water is fresh or stagnated. Fresh water is much cooler.

Conex Bänninger offers various solutions in both copper and stainless steel for high hygienic demands and good corrosion resistance. Find out more at https://fal.cn/3tDBm

Autumn is in full swing and it's getting cold again. Now even more annoying, if radiators need to be replaced.

Our flame-free systems can be used especially in hard-to-reach places.>B< Push is particularly worth mentioning. The fittings can simply be pushed onto the tube and are immediately tight. No tools, no flame and no space problems.Another advantage of push-fit fittings is the possibility of subsequently loosening the connection with the help of a small, handy tool.

It's quick and should be considered carefully. Connections that last a lifetime!
Some are hard to undo. Unlike >B< Oyster.

Just as fast, permanently tight and yet can be undone with no problems...
How does it work? Check out the video: https://fal.cn/3tq7N

Withstanding even extreme pressures. K65.

If CO2 is used as a refrigerant, extreme operating pressures of up to 130 bar occur. The copper material from which K65 is made has a high mechanical strength and thus represents a safe and economical solution for use of CO2.

More information about the K65 series?
https://fal.cn/3tg20