All Street Panel

XT GT 15x10 Auto Drag with a 295x55 tyre 💪🏁

The Following was conducted:

• Radius Tubs
• Flat Boot Floor
• Custom Back Seat Panel
• Rear Half Chassis Rails
• Chassis Connectors
• Leaf Spring Relocation With Our Custom Front Mount and Rear Slider Boxes
• Custom Made Lower Quarter Panels to look Original
• Custom Fabricated Boot Stays To Match The Original Top Half
• Fuel Tank Frame
• Optima Battery Mount
• CDS Nine Inch With 35 Spline Moser Axles and Wilwood Rear Brakes

Our year that was, Wishing Everyone a Merry Christmas and a Happy New Year. Thank you to our loyal customers for your constant support and trust, bring on 2026 💪🏁

Some Progress Photos of the XT GT we have been working on 💪🏁

The Following Rust Repairs Have Been Conducted So Far:

• Install LH & RH Lower Quarter Panels
• Install Tops Of LH & RH Quarter Panels Around The Rear Window
• Rear Window Panel
• Lower Rear Window Panel support Brace
• Complete Rear Parcelshelf Set Up
• Upper and Lower Back Panel
• Install Inner and Outer LH & RH Sill Panel NOS
• Inner and Outer LH & RH Front Torque Boxes
• Inner and Outer LH & RH Rear of Front Chassis Rails
• Fabricate LH Front Floor Panel Section and Install
• Install LH & RH Seat Braces
• Inner and Outer LH & RH A Pillar sections
• Install LH Rear Door Skin NOS
• Modify Door Gaps
• LH Dog Leg Repair Section

HQ GTS Coupe in to accomodate the 15x10 Weld Pro Star with the 295x55 tyre 💪🏁

The Following Was Conducted:

• Radius Tubs
• Notch and Re Build The Factory Chassis Rail
• Custom Tubular Top Trailing Arm Set Up
• Chassis Connectors
• Lower Trailing Arm Reinforcment Plates
• Front Inner and Outer Kidney Plates
• CDS braced nine inch diff with custom lower brackets, 35 Spline Moser axles and 11” wilwood disc brakes
• CDS Adjustable Upper and Lower Trailing Arms

Anthony’s Drag Challenge XW Ute We Assembled 💪🏁
The Following Was Conducted:

• Install Engine and Transmission
• Fuel System to suit unleaded and a E85 Tank
• Custom Tailshaft Loop
• Cooling System
• Custom Centre Console
• Set up parachute leaver and cable set up
• Cage Roof Bars

HQ Pro Tourer Ute in to accomodate the 18x12 Simmons 💪🏁

The Following was conducted:

• Custom Crossmember
• Custom Chassis Rails
• Our Custom Radial 4 Link Set Up
• Custom Watts Link
• CK Racing Developments Billet Shock Mounts
• Race Product 3.5inch Sheet Metal Housing With Their Upgraded 35 Spline Floaters Constructed By CDS Engineering
• 12 inch Wilwood Rear Brake Kit With Electronic Handbrake

XC Falcon in to accommodate the 15x12 with a 29x15 tyre 💪🏁

The Following was conducted:

• Rear Clip
• Chassis Connectors
• Our Custom Radial 4 Link Set Up
• Radius Tubs
• Flat Boot Floor
• Raised Rear Floor For Muffler Clearance
• Wishbone Track Locator
• Gazzard Bros Anti Roll Bar
• CK Racing Developments Billet Shock Mount
• Viking Coil Over Shock Absorbers
• Custom Made Rear Seat Panel
• Rear Boot Roll Cage Tube Set Up For Removable
Roll Cage
• Gas Strut Boot Hinge Conversion
• Race Products Sheet Metal 9 inch With Their Upgraded 35 Spline Floater kit Constructed By CDS Engineering
• 11 inch Wilwood Rear Brake Kit With Electronic Handbrake

Super Stock VK in for a couple of upgrades

• Removable Parachute Mount

• Modify the diff housing to accomodate the new shock absorbers to suit the radials

• Modify the fuel tank frame to suit the new fuel cell

• Install the new billet battery clamp

LX Torana in to accommodate a 15x8.5 with a 255x60 Tyre 💪🏁

The Following was conducted:

• Notch and Re Build The Factory Chassis Rail
• Split and Modify The Factory Tub
• CDS Engineering 9 inch Housing with Radial 4 Link Brackets, adjustable upper and lower control arms and 31 Spline Strange Axles

HK Premier in to modify the Transmission Tunnel to suit T400