TC's Fiberglass Works

Motorcycle Repair Shop

Christmas comes early for some lucky customers! Happy holidays enjoy

New stator, fixed the wiring, relocated the battery and reg rec, repaired the threads on the oil drain bold hole in the block and it's back up and reliable again.

Fixed some wiring nightmare and installed a integrated tail light

Tune, service, chain and sprockets. All set for a summer of fun. Enjoy that new final drive ratio 😈

After a lot of late nights and a long patient wait this 2008 Suzuki m109r has finally made it home. Hope you enjoy good sir

Upgraded the air power in the shop! Now the sandblaster will be back up and running!

All the glass work is done! Final sand tomorrow

Round three done! One spot left to glass in and then off to paint!

More build up two more layers and it will be looking good.

First set of glass work done. Structural integrity back. Now for the cosmetic build up

Reglassing a wrecked hood

[09/30/17]   Well it's been a slow year but I guess everything comes in waves, as this year we have been getting lots of sleds and track system installs this fall. Looks like we will be having a busy winter! #thankful #blessed #humbled this winter work load is a very happy sight. Thank you to all the continued customers and service. Thankful for this new shop and square footage to allow the room needed for all the work coming in. Thank you to each and every one of you! Without you this would just be a dream!!!

TC's Fiberglass Works's cover photo

Well we're out working the lake life today. Getting your boats and skis running to enjoy this perfect weather. Now just if this smoke would clear out :)

Been a while since we posted here! Alot of growth within the company and direction of change has happened. As of now we have slowed down to one day a week and by appointment only, we do apologise for the inconvenience that this may cause as summer is here. Thank you all for your support and continued work that you have sent our way. Soon we will be back to normal operating hours once our new location is dialed in and up and running. Stay tuned!!

New stunt cage install

#latenightgrind

Another build ready to go zx6r

Another build to finish....... this warm weather is bringing all the bikes out.

A little FZ1 tuning. One more turn out and it should be ready to go home!

Doin some 21" white wall swap

Another round of building some superhawk carbs here we go. This will mark seven superhawks this year so far

Just because we're closed doesn't mean we are not working. It was a UPS day :) time to knock out some work. #lovedclosednights #turningitout #phoneonsilent

More dirt toys showing up

[04/28/17]   Dirt season is here :) the dirt bikes are rolling in for service and repair now. Beat the heat and jump ahead of the rush.

Love my customers. 2 years and silver has been here since stock. New chain and sprockets. Love this build!!

Another one done. 2005 Yamaha r1 fairing swap and stator reg rec swap

Still looking for experienced help. Pay is 10 to 30 per hour DOE

Well the day has come! Spring has sprung! The weather is starting to get better and the work load is picking up again. Once again we are happy to have this problem but it is a problem! We are looking for one to two part time people willing to learn and work, a background in motorcycles and mechanics is a must. Pay is flat rate and DOE. This position has the ability to become full time. Only requirements needed to start are:

-be positive
-show up on time
-be ready to work
-be willing to ask questions
-be able to say "I dont know"

Everything else can be trained.

If this is something that interest you please feel free to reach out to us.

Valve adjust, tune up, remove broken bolts and ship! Another one Ready to go home

Well the day has come! Spring has sprung! The weather is starting to get better and the work load is picking up again. Once again we are happy to have this problem but it is a problem! We are looking for one to two part time people willing to learn and work, a background in motorcycles and mechanics is a must. Pay is flat rate and DOE. This position has the ability to become full time. Only requirements needed to start are:

-be positive
-show up on time
-be ready to work
-be willing to ask questions
-be able to say "I dont know"

Everything else can be trained.

If this is something that interest you please feel free to reach out to us.

Here we are once again with some superhawk puzzle time

Dejavu i feel like ive been here before doing these Superhawk carbs!! Fifth set of superhawks this year lmao

Here grinding all day! Sun's out!! get out on them two's!!

seattle.craigslist.org

1999 Honda SuperHawk 996 (VTR1000)

pick up the superhawk for a good deal great bike needs nothing

seattle.craigslist.org LOUD Dan Moto exhaust sounds killer 38k miles, fresh tune-up Summer 2016 Lots of life left on tires Flush mount blinkers and tail light Comes with extra set of fairings, stock exhaust, extra seat,...

Playing with puzzles at all hours of the night

Rain or shine were on the grind. Another one added to the list at the shop #Superhawk #carbwork

About to have some fun!

[02/07/17]   Well today is the first day of being two years old! Thank you to all of our powersports customers as well as all the conections we have made from jumping into the motorcycle world. We are super excited to see the growth as we gear up for our third summer!!! #brrraplife #onelifetwowheels #shinnysideup #eyeonthegoal #brickandmortar

TC's Fiberglass Works's cover photo

2017

January's work load.

January's work load.

And we are busy!! Season has started, get in now before the wait list builds up!!

BEAT THE SUMMER RUSH!!!!!! Yes it's 20 degrees outside but we all know that itch!! Before we know it spring will be here! Are you ready? Bike all tuned up? New tires set? Are you dialed in for a summer of riding? We offer services at a very competitive rate backed by manufacturers training and certifications.
We work on all makes and most models (sorry no goldwings)

Suzuki, Honda, Yamaha, Kawasaki, Triumph, BSA, Ducati, Harley (to name a few) as well as some China brands.

We are a full service shop set up and capable to handle any needs you may have. We work with companies that do vinyl wrapping, painting, hydro dipping, machine working and engine boring, as well as powder coating. Do to that we are able to offer a better rate than counter sales.

We offer free pick up and delivery in most cases.

All work perfomed in house is done in a flat rate system. You will be billed one time for the work and all work is warrantied. Any concerns or issues will be addressed and handled free of charge if due to shop error.

'05 Chevy 3500 turbo diesel

From crate to complete! Final inspection Ken did a excellent job setting this up, and after a 7 hour breakin period it is ready to rally!

Christmas came early for one lucky little PABO member!

Want your business to be the top-listed Autos & Automotive Service in Auburn?

Click here to claim your Sponsored Listing.

Videos (show all)

Telephone

Address


Auburn, WA
98001
Other Motorcycle Repair in Auburn (show all)
Stallion Moto Stallion Moto
2121 D St SE
Auburn, 98002

We service and repair motorcycles and also do custom work, call us!!

Auburn Motorcycle Auburn Motorcycle
722 40th St NE
Auburn, 98002-1324

☼ For the love of riding ☼

Superbike Underground Superbike Underground
1415 22nd St NW, Ste D
Auburn, 98001

Motorcycle repair and performance.

Mod My Gauges Mod My Gauges
Mid Town
Auburn, 98003

Mod My Gauges is a custom gauge and lighting modification website. We customize all your custom gauge needs, setting you apart from the masses.